A visible-light activated [2 + 2] cycloaddition reaction enables pinpointing carbon–carbon double bonds in lipids

The precise location of C C bonds in bioactive molecules is critical for a deep understanding of the relationship between their structures and biological roles. However, the traditional ultraviolet light-based approaches exhibited great limitations. Here, we discovered a new type of visible-light activated [2 + 2] cycloaddition of carbonyl with C C bonds. We found that carbonyl in anthraquinone showed great reactivities towards C C bonds in lipids to form oxetanes under the irradiation of visible-light. Combined with tandem mass spectrometry, this site-specific dissociation of oxetane enabled precisely locating the C C bonds in various kinds of monounsaturated and polyunsaturated lipids. The proof-of-concept applicability of this new type of [2 + 2] photocycloaddition was validated in the global identification of unsaturated lipids in a complex human serum sample. 86 monounsaturated and polyunsaturated lipids were identified with definitive positions of C C bonds, including phospholipids and fatty acids even with up to 6 C C bonds. This study provides new insights into both the photocycloaddition reactions and the structural lipidomics.

A new visible-light activated [2 + 2] cycloaddition reaction was discovered and enabled pinpointing carbon–carbon double bonds in lipids.     

STUDIES ON REGULARITY OF POLY PHENYLSILSESQUIOXANE CHAINS

IR and ~(29)Si NMR were used to determine the structures of ladderlike polymer polyphenylsilsesquioxanes (PPS). It was found that PPS with lots of defects had a wide and strong absorption band in 1000—1400 cm~(-1) with only one sharp peak at 1137 cm~(-1) while two peaks (1130 and 1045 cm~(-1) were observed for PPS with perfect ladderlike structure. Branching and crosslinking of PPS lead to the reduction of 1045 cm~(-1) peak. ~(29)Si NMR spectra, however, showed two peaks (δ=-78 ppm and -87 ppm when δ_(HMDS)=0 ppm) for defective or branched PPS. The -87 ppm peak is related to the ladderlikely constructed Si atoms and -78 ppm corresponds to defective Si atoms. PPS with defects less than 0.1% chain units was obtained by azeotropic polycondensations.     

Lysosomal pH Rise during Heat Shock Monitored by a Lysosome‐Targeting Near‐Infrared Ratiometric Fluorescent Probe

Heat stroke is a life‐threatening condition, featuring a high body temperature and malfunction of many organ systems. The relationship between heat shock and lysosomes is poorly understood, mainly because of the lack of a suitable research approach. Herein, by incorporating morpholine into a stable hemicyanine skeleton, we develop a new lysosome‐targeting near‐infrared ratiometric pH probe. In combination with fluorescence imaging, we show for the first time that the lysosomal pH value increases but never decreases during heat shock, which might result from lysosomal membrane permeabilization. We also demonstrate that this lysosomal pH rise is irreversible in living cells. Moreover, the probe is easy to synthesize, and shows superior overall analytical performance as compared to the existing commercial ones. This enhanced performance may enable it to be widely used in more lysosomal models of living cells and in further revealing the mechanisms underlying heat‐related pathology.     

Spectrophotometric determination of deacetylation degree of chitinous materials dissolved in phosphoric acid

A simple spectrophotometric method is proposed for determining deacetylation degrees (DD) of chitinous materials using phosphoric acid as the UV-transparent solvent system. Calibrating by the extinction coefficients (A(210)) of D-glucosamine and N-acetyl-D-glucosamine, DD values (24-88%) were computed numerically. The results correlated well (R(2) = 0.9805, n = 50) with those obtained by solid-state (13)C NMR. Comparison of the results obtained by the proposed UV method and solid-state (13)C NMR.     

含次环己基有机硅单体及二聚体的NMR谱与结构

含次环已基有机硅单体及其二聚体业已成功地合成^[1],本文研究了这类新单体和二聚体的¹H-NMR、¹³C-NMR、和²⁹Si-NMR谱,从而确定了它们的结构。     

Methylated and pegylated PLA–PCL–PLA block copolymers via the chemical modification of di‐hydroxy PCL combined with the ring opening polymerization of lactide

Methylated and pegylated poly(lactide)‐block‐poly(ε‐caprolactone)‐block‐poly(lactide) copolymers, PLA–P(CL‐co‐CLCH₃)–PLA and PLA–P(CL‐co‐CLPEG)–PLA, were prepared in three steps: combining the formation of carbanion‐bearing dihydroxylated‐PCL, the coupling of iodomethane or bromoacetylated α‐hydroxyl‐ω‐methoxy‐poly(ethylene glycol) onto the carbanionic PCL, and finally the ring opening polymerization of DL ‐lactide initiated by the preformed grafted diOH‐PCL copolymers. The resulting block copolymers exhibited lower crystallinity, melting temperature, and hydrophobicity with respect to the original PCL. Degradation of the grafted copolymers was investigated in the presence of Pseudomonas cepacia lipase and compared with that of the triblock copolymer precursor. It is shown that the presence of the grafted substituents affected the enzymatic degradation of PCL segments. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4196–4205, 2005     

横观各向同性体应力波传播问题的特征分析

本文根据广义特征理论,对横观各向同性体轴对称弹性波传播问题进行了理论分析。提出了一个简化特征分析的方法,这种方法将成为应用特征线法求解各类各向异性应力波问题的一个突破口。     

D-吡喃葡萄糖碳苷的13C-NMR研究

本文报导了十个碳苷化合物的¹³C-NMR谱,其中四对是α、β端基异构体。研究结果发现,α和β异构体糖环各相应碳原子的¹³C-NMR的化学位移值有明显差异。β异构体糖环上各碳的化学位移值(除C₄'外)均比α异构体相应碳大,而且各具特征数值。这一规律可用作区分碳苷的端基构型。此外尚讨论了糖的构型对苷元δ_c值的影响。     

Molecularly imprinted solid-phase extraction combined with electrochemical oxidation fluorimetry for the determination of methotrexate in human serum and urine

The method of synthesis and evaluation of molecularly imprinted polymers was reported. As a selective solid-phase extraction sorbent, the polymers were coupled with electrochemical fluorimetry detection for the efficient determination of methotrexate in serum and urine. Methotrexate was preconcentrated in the molecularly imprinted solid-phase extraction microcolumn packed with molecularly imprinted polymers, and then eluted. The eluate was detected by fluorescence spectrophotometer after electrochemical oxidation. The conditions of preconcentration, elution, electrochemical oxidation and determination were carefully studied. Under the selected experimental conditions, the calibration graph of the fluorescence intensity versus methotrexate concentration was linear from 4x10(-9) g mL(-1) to 5x10(-7) g mL(-1), and the detection limit was 8.2x10(-10) g mL(-1) (3sigma). The relative standard deviation was 3.92% (n=7) for 1x10(-7) g mL(-1) methotrexate. The experiments showed that the selectivity and sensitivity of fluorimetry could be greatly improved by the proposed method. This method has been successfully applied to the determination of methotrexate. At the same time, the binding characteristics of the polymers to the methotrexate were evaluated by batch and dynamic methods.     

Enzymatic degradation of block copolymers obtained by sequential ring opening polymerization of l-lactide and ?-caprolactone

Copolymers of ?-caprolactone and l-lactide with different molar ratios were prepared via sequential ring opening polymerization (ROP) of both monomers. The resulting PCL-PLLA-PCL triblock copolymers were characterized by using NMR, SEC, DSC and XRD. One melting peak corresponding to the PCL block was detected, but the presence of PLLA decreased the crystallinity of PCL. Enzyme-catalyzed biodegradation of solution cast films was investigated at 37 °C in the presence of Pseudomonas lipase. It was observed that the PLLA component retarded the degradation of the block copolymer as compared to the PCL homopolymer. Therefore, the enzymatic degradation rate can be adjusted by varying the composition of the copolymers. ¹H NMR and SEC data showed no significant chemical composition or molecular weight changes during degradation, indicating that the degradation proceeded according to a surface erosion mechanism. ESEM confirmed surface erosion with appearance of a rugged morphology.