Radical ring-opening polymerization behavior of vinylcyclopropanes derived from dienes and chloroform

1,1-Dichloro-2-vinylcyclopropane ( Ia ), 1,1-dichloro-2-methyl-2-vinylcyclopropane ( Ib ), 1,1,2-trichloro-2-vinylcyclopropane ( Ic ) were prepared from the corresponding dienes and chloroform in the presence of a phase transfer catalyst (PTC), R₄N⁺Cl^?. Monomers Ia – Ic underwent a clean 1,5-type radical ring-opening process to afford the corresponding polymers in good yield. Further, the relative rate of polymerization and reaction of ( I ) with thiophenol were studied.     

Adiabatic microcalorimeters for heat capacity measurement at low temperature

Technical problems in the design and construction of small sample adiabatic calorimeters are pointed out and solutions to them discussed. Two calorimeters constructed on the design principle are described with illustrative examples of data obtained with them. Hard and soft wares for fully automatic operation of the two calorimeters are described in some detail.     

Free-radical-induced polymerization of epoxides in the presence of maleic anhydride

The free-radical-induced reactions of cyclohexene oxide in the presence of maleic anhydride have been found to lead to polyether in presence of AIBN and to a mixture of polyether, ester, and maleic anhydride adduct of polyether with di-tert-butyl peroxide (DTBP), the amounts of the mixture components depending on the concentration of DTBP and the temperature. Analogous reactions in the presence of succinic anhydride lead to no polyether. The obtained polyether has no hydroxyl group. The reaction appears to consist of three different steps, radical initiation, cationic propagation, and radical termination.     

Photophysical and (photo)electrochemical properties of a coumarin dye

A new coumarin dye, cyano-{5,5-dimethyl-3-[2-(1,1,6,6-tetramethyl-10-oxo-2,3,5,6-tetrahydro-1H,4H,10H-11-oxa-3a-aza-benzo[de]anthracen-9-yl)vinyl]cyclohex-2-enylidene}-acetic acid (NKX-2753), was prepared and characterized with respect to photophysical and electrochemical properties. It was employed as a dye sensitizer in dye-sensitized solar cells and showed efficient photon-to-electron conversion properties. The photocurrent action spectrum exhibited a broad feature with a maximum incident photon-to-electron conversion efficiency (IPCE) of 84% at 540 nm, which is comparable to that for the famous red dye RuL2(NCS)2 (known as N3), where L stands for 2,2'-bipyridyl-4,4'-dicarboxylic acid. The sandwich-type solar cell with NKX-2753, under illumination of full sun (AM1.5, 100 mW cm(-2)), produced 16.1 mA cm(-2) of short-circuit photocurrent, 0.60 V of open-circuit photovoltage, and 0.69 of fill factor, corresponding to 6.7% of overall energy conversion efficiency using 0.1 M LiI, 0.05 M I2, 0.1 M guanidinium thiocyanate, and 0.6 M 1,2-dimethyl-3-n-propyl-imidazolium iodide in dry acetonitrile as redox electrolyte. In comparison with its analogue NKX-2586 (Langmuir 2004, 20, 4205), NKX-2753 with an extra side ring on the alkene chain produced much higher IPCE values at the same conditions. The side ring acted as a spacer to efficiently prevent dye aggregation when adsorbed on the TiO2 surface, resulting in significant improvements of short-circuit photocurrent, open-circuit photovoltage, and fill factor compared with NKX-2586 that aggregated on the TiO2 surface.     

Calorimetric study of the glassy state XII. Plural glass-transition phenomena of ethanol

Ethanol was found to give a metastable crystalline phase (crystal-II) when the liquid was cooled at a moderate rate. Glassy states of liquid and of newly found crystal-II were obtained in the calorimeter cell by controlling the cooling rate of the liquid. The heat capacities of these phases as well as that of the stable crystal-I were measured by an adiabatic calorimeter in the temperature range between 14 and 300 K. The glass transition temperature T_g, the heat-capacity jump at T_g, and the residual entropy were found to be 97 K, 35.3 J K^?1 mol^?1, and 8.93 J K^?1 mol^?1 for the glassy liquid, and 97 K, 22.8 J K^?1 mol^?1, and 4.24 J K^?1 mol^?1 for the glassy crystal-II, respectively. The values for the residual entropy are referred to the third-law entropy for crystal-I.The heat capacities reported previously for the supercooled liquid by Gibson et al. and by Parks and Kelley agree well with those for the metastable crystal-II. Those of the supercooled liquid connect smoothly with those obtained for the liquid above the melting temperature. Thus, ethanol is found to be another example of a low-molecular-weight compound which shows multiple glass-transition phenomena.     

Marginal electron density and density-difference functions

Summary For visual analysis of the density reorganization and distortion, the one-dimensional cut (x, y ₀,z ₀) and the two-dimensional cut (x, y, z ₀) of the three-dimensional electron density difference function (x, y, z) are frequently employed. However, these cut functions do not satisfy any sum rules in contrast to the original difference function (x, y, z). To avoid this difficulty, the use of the marginal electron density functions _x (x) and _xy (x, y) and their difference functions _x (x) and _xy (x, y) is proposed. The marginal densities are condensation of the three-dimensional density onto a particular plane or line of our interest, and they satisfy the sum rule (i.e., the conservation of the number of electrons) exactly. Some basic properties of the marginal electron density are clarified for typical diatomic molecular orbitals. An illustrative application is given for the bonding and antibonding processes in the H₂ system.     

Thermodynamic studies of clathrate hydrates

Thermodynamic studies of clathrate hydrates, mainly of structures I and II, are considered in this review which is based on 147 references. There are two main subjects. The first is the host lattice energy and the guest-host interaction energy, both of these quantities being related to the enthalpy of dissociation and composition of the hydrates. The second subject concerns orientational ordering phenomena occurring in both host and guest, as reflected in the low temperature heat capacity. The classical theoretical treatment of clathrate formation has been reconsidered on the basis of recent experimental results. Particular emphasis has been given to orientational ordering since this topic is undoubtedly central to clarifying the nature of clathrate hydrates.Ausgehend von 147 Literaturangaben wurden in diesem Review thermodynamische Untersuchungen von Klathrathydraten hauptsächlich der Struktur I und II betrachtet. Es gibt zwei Hauptaugenmerke. Als erstes die Wirtsgitterenergie und die Gast-Wirt-Wechselwirkungsenergie, beide bezogen auf die Dissoziationsenthalpie und die Bildungsenthalpie der Hydrate. Das zweite Hauptaugenmerk betrifft Orientierungs-Konditionierungserscheinungen sowohl in Wirt als auch Gast, wie in den Wärmekapazitäten bei niedrigen Temperaturen widergespiegelt wird. Auf der Basis jüngster experimenteller Ergebnisse wurde die klassische theoretische Betrachtung über die Bildung von Klathraten überprüft. Der Orientierung-Konditionierung wurde besonderer Nachdruck verliehen, da dies zweifellos eine entscheidende Rolle bei der Klärung der Natur der Klathrathydrate spielt. 147 I II. . «» « — », . «» « », . . , .

---

Contribution No. 155 from the Chemical Thermodynamics Laboratory.     

Generation of alkoxycarbenium ion pools from thioacetals and applications to glycosylation chemistry

[reaction: see text] Alkoxycarbenium ions have been generated and accumulated as "cation pools" by the low-temperature electrochemical oxidation of alpha-phenylthioethers. Although an unsuccessful attempt to accumulate glycosyl cations was made, a one-pot method for electrochemical glycosylation, which involves anodic oxidation of thioglycosides to generate glycosyl cation equivalents followed by their reactions with glycosyl acceptors, has been developed.