Influence of Natural and Accelerated Weathering on the Mechanical Properties of Low-Density Polyethylene Films

Natural and accelerated weathering tests were performed to inspect the effect of antioxidants on low-density polyethylene (LDPE) films used as greenhouse covering materials. The LDPE pellets were extruded and blown into a film using a twin-screw extruder and film blowing machine, respectively. The film with 0.2 wt.% Alkanox-240 (AN-0.2) stabilizer showed the highest tensile strength (11 MPa) among all samples during 90 days of natural as well as accelerated weathering. The elastic modulus of the film with 0.5 wt.% of Good-rite (GR-0.5) increased after weathering from approximately 91.8 to 138.9 MPa, and showed the best performance. Morphological images of the neat LDPE film during weathering showed some cracks and grooves, while those of stabilized films showed fewer cracks. Moreover, the estimation of the rapidity of the accelerated method compared to the natural one was approximately nine times faster in Riyadh during the summer season (June–August). The present study suggests that the addition of antioxidants can improve the tensile strength, stability, and, hence, the effectiveness of these films. The best antioxidants were found to be 0.2 wt.% Alkanox and 0.5 wt.% Good-rite antioxidants.     

In vitro antiproliferative activity of glabridin derivatives and their in silico target identification

Abstract

Novel Mannich base derivatives of glabridin were synthesized and their antiproliferative activity were performed along with our previously reported glabridin-chalcone hybrids molecules (GCHMs) against various human cell lines MDA-MB-231 (breast adenocarcinoma), HEK-293 (embryonic kidney cell line), K562 (leukemia), MCF-7 (breast adenocarcinoma), HeLa (cervix adenocarcinoma), HepG2 (hepatocellular carcinoma) and WRL-68 (hepatic carcinoma). The result showed that the glabridin significantly reduced cell proliferation with IC₅₀ ranges from 3.67 to 58.30?µM against all the tested cell lines. The remarkable reduction in antiproliferative activity 2’,4’-dimethoxyglabridin and GCHMs compounds with phenolic OH groups protected by methoxy (OCH₃) groups suggested that the free OH groups are essential factor for the antiproliferative activity of glabridin and its derivatives. The Mannich base derivatives of glabridin showed moderate activity IC₅₀ (2.20–>95.78?µM). Furthermore, in silico target identification analysis revealed that AKT1, DECR1 and NOS1 are the potential targets for glabridin and their derivatives.     

Thermal stability of functionalized carbon nanotubes studied by in-situ transmission electron microscopy

The thermal stability of funtionalized carbon nanotubes (CNTs) has been studied experimentally by direct in-situ observations using a heating stage in a transmission electron microscope, from room temperature (RT) to about 1000 °C. It was found that the thermal stability of the functionalized CNTs was significantly reduced during the in-situ heating process. Their average diameter dramatically expanded from RT to about 500 °C, and then tended to be stable until about 1000 °C. The X-ray energy dispersive spectroscopy analysis suggested that the diameter expansion was associated with coalescence of the carbon structure instead of deposition with additional foreign elements during the heating process.     

Thermal and pH Dual Responsive Copolymer and Silver Nanoparticle Composite for Catalytic Application

N‐Isopropylacrylamide and vinyl imidazole copolymer, P(NIPAM‐co‐VI), was synthesized by free radical emulsion polymerization. Then, the copolymer and silver nanoparticle composite, P(NIPAM‐co‐VI)‐Ag, was prepared by in situ reduction of AgNO₃ with NaBH₄. Due to the coexistence of thermal‐responsive PNIPAM and pH‐responsive PVI, P(NIPAM‐co‐VI) and P(NIPAM‐co‐VI)‐Ag exhibited both thermal and pH responsibility, their size would change while altering the temperature or pH of the circumvent. Their thermal and pH dual responsive properties were studied by dynamic light scattering (DLS). P(NIPAM‐co‐VI)‐Ag could be stably dispersed in water at a pH range from 3.0 to 9.3, which is favorable to use P(NIPAM‐co‐VI)‐Ag as a catalyst in the reduction reaction of p‐nitrophenol. The reaction rate constant (k_app) increased with the decrease of pH or the increase of VI content in the copolymer.     

A facile and green synthetic approach toward fabrication of starch-stabilized magnetite nanoparticles

A facile and green synthetic approach for fabrication of starch-stabilized magnetite nanoparticles was implemented at moderate temperature. This synthesis involved the use of iron salts, potato starch,sodium hydroxide and deionized water as iron precursors, stabilizer, reducing agent and solvent respectively. The nanoparticles(NPs) were characterized by UV-vis, PXRD, HR-TEM, FESEM, EDX, VSM and FT-IR spectroscopy. The ultrasonic assisted co-precipitation technique provides well formation of highly distributed starch/Fe_3O_4-NPs. Based on UV–vis analysis, the sample showed the characteristic of surface plasmon resonance in the presence of Fe_3O_4-NPs. The PXRD pattern depicted the characteristic of the cubic lattice structure of Fe_3O_4-NPs. HR-TEM analysis showed the good dispersion of NPs with a mean diameter and standard deviation of 10.68 4.207 nm. The d spacing measured from the lattice images were found to be around 0.30 nm and 0.52 nm attributed to the Fe3O4 and starch, respectively. FESEM analysis confirmed the formation of spherical starch/Fe_3O_4-NPs with the emission of elements of C, O and Fe by EDX analysis. The magnetic properties illustrated by VSM analysis indicated that the as synthesized sample has a saturation magnetization and coercivity of 5.30 emu/g and 22.898 G respectively.Additionally, the FTIR analysis confirmed the binding of starch with Fe_3O_4-NPs. This method was cost effective, facile and eco-friendly alternative for preparation of NPs.     

Isolation and antiproliferative activity of triterpenoids and fatty acids from the leaves and stem of Turraea vogelii Hook. f. ex benth

Chloroform extract from the leaves of Turraea vogelii Hook f. ex Benth demonstrated cytotoxic activity against a chronic myelogenous leukemia cell, K-562 with IC₅₀ of 14.27 μg/mL, while chloroform, ethyl acetate and methanol extracts from the stem of the plant inhibited K-562 cells growth with IC₅₀ of 19.50, 24.10 and 85.40 μg/mL respectively. Bioactive chloroform extract of Turraea vogelii leaves affords two triterpenoids: oleana-12,15,20-trien-3β-ol (1), and oleana-11,13-dien-3β,16α,28-triol (2), with six fatty esters, ethyl hexaeicos-5-enoate (3), 3-hydroxy-1,2,3-propanetriyltris(tetadecanoate) (4), 1,2,3-propanetriyl(7Z,7′Z,7′′Z)tris(-7-hexadecenoate) (5), 1,2,3-propanetriyl(5Z,5′Z,5′′Z)tris(-5-hexadecenoate) (6), 1,2,3-propanetriyltris(octadecanoate) (7), and 2β-hydroxymethyl tetraeicosanoate (8). Tetradecane (9), four fatty acids: hexadecanoic acid (10), tetradecanoic acid (11), (Z)-9-eicosenoic acid (12), and ethyl tetradec-7-enoate (13) were isolated from chloroform extract of Turraea vogelii stem. 1,2,3-propanetriyltris(heptadecanoate) (14), (Z)-9-octadecenoic acid (15) and (Z)-7-tetradecenoic acid (16) were isolated from ethyl acetate extract while (Z)-5-pentadecenoic acid (17) was obtained from methanol extract of the plant stem. Compounds 1, 2, 5, 6, 11, 12, 15, 16 and 17 exhibited pronounced antiproliferative activity against K-562 cell lines.     

Mechanical Properties and In Vitro Physico‐chemical Reactivity of Gel‐derived SiO2–Na2O–CaO–P2O5 Glass from Sand

In the present report, a bioactive glass was synthesized from silica sand as economic substitute to alkoxy silane reagents. Sodium metasilicate (Na₂SiO₃) obtained from the sand was hydrolyzed and gelled using appropriate reagents before sintering at 950 °C for 3 h to produce glass in the system SiO₂? Na₂O? CaO? P₂O₅. Compression test was conducted to investigate the mechanical strength of the glass, while immersion studies in simulated body fluid (SBF) was used to evaluate reactivity, bioactivity and degradability. Furthermore, the glass samples were characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and energy dispersive X‐ray spectroscopy (EDX) to evaluate the microstructure and confirm apatite formation on the glass surface. The glass, dominated by bioactive sodium calcium silicate, Na₂Ca₂Si₃O₉ (combeite) crystals, had mechanical strength of 0.37 MPa and showed potentials for application as scaffold in bone repair.     

Optical band gap and conductivity measurements of polypyrrole-chitosan composite thin films

Electrical conductivity and optical properties of polypyrrole-chitosan（PPy-CHI） conducting polymer composites have been investigated to determine the optical transition characteristics and energy band gap of composite films.The two electrode method and I-V characteristic technique were used to measure the conductivity of the PPy-CHI thin films,and the optical band gap was obtained from their ultraviolet absorption edges.Depending upon experimental parameter,the optical band gap（E_g） was found within 1.30-2.32 eV as estimated from optical absorption data.The band gap of the composite films decreased as the CHI content increased.The room temperature electrical conductivity of PPy-CHI thin films was found in the range of 5.84×10^-7-15.25×10^-7 S·cm^-1 depending on the chitosan content.The thermogravimetry analysis（TGA） showed that the CHI can improve the thermal stability of PPy-CHI composite films.     

Mechanical properties and morphology of homoblends of a poly(ethyl acrylate) ionomer having one ion pair per ionic repeat unit and a poly(ethyl acrylate) ionomer having two ion pairs

The mechanical properties and morphology of homoblends of poly(ethyl acrylate‐co‐acrylate) (PEAA) having one ion pair per ionic monomer repeat unit and poly(ethyl acrylate‐co‐itaconate) (PEAITA) having two ion pairs were investigated. It was found that the compositional variation in the ionomer homoblends did not affect the matrix or cluster glass transition temperatures of the two ionomers of the homoblends. It was also observed that the ionomer homoblends showed two ionic plateaus and that the changes in the two ionic moduli were directly related to the relative amounts of the two ionomers. The ionic moduli calculated with the model for filler‐dispersed materials were found to fit the experimental data to a great extent. Therefore, it was suggested that the PEAITA/PEAA ionomer homoblends were filler‐containing composite materials rather than miscible blends. In the X‐ray scattering study, it was observed that the morphology of the ionomer homoblends was not affected by mixing. The results obtained in this work might be useful for the modification of the storage moduli of copolymers in a certain temperature range without the alteration of their processing temperatures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1045–1052, 2007.