Mechanical properties and transition temperatures of crosslinked-oriented gelatin

 This second part of a systematic study of the properties of crosslinked-oriented gelatin involves the effects of orientation and water content on the glass transition temperature T _g and on the melting behavior. The samples were the same as those in the preceding study, and their transition temperatures were determined by both differential scanning calorimetry and dynamic mechanical thermal analysis. The crosslinked gelatin which had been room-conditioned showed two transition temperatures: the lower one was attributed to T _g of the water-plasticized gelatin, and the higher one was interpreted as T _g of dried gelatin superimposed by melting. A rather unusual situation arose because of the fact that the T _g and melting temperatures T _m (217 and 230 ^°C, respectively) are so similar. Using water as plasticizer not only decreases T _g but produces imperfect crystallites which melt below the T _g of the system. The presence of the amorphous phase in the glassy state would presumably make it essentially impossible to define a melting point or crystallization temperature in the normal manner, as an equilibrium between crystalline and amorphous phases. Received: 8 October 1996 Accepted: 2 November 1995     

Synthesis,crystal structure,and electronic structure of Li2PbSiS4: a quaternary thiosilicate with a compressed chalcopyrite‐like structure

The new quaternary thiosilicate, Li₂PbSiS₄ (dilithium lead silicon tetrasulfide), was prepared in an evacuated fused‐silica tube via high‐temperature, solid‐state synthesis at 800 °C, followed by slow cooling. The crystal structure was solved and refined using single‐crystal X‐ray diffraction data. By strict definition, the title compound crystallizes in the stannite structure type; however, this type of structure can also be described as a compressed chalcopyrite‐like structure. The Li⁺ cation lies on a crystallographic fourfold rotoinversion axis, while the Pb²⁺ and Si⁴⁺ cations reside at the intersection of the fourfold rotoinversion axis with a twofold axis and a mirror plane. The Li⁺ and Si⁴⁺ cations in this structure are tetrahedrally coordinated, while the larger Pb²⁺ cation adopts a distorted eight‐coordinate dodecahedral coordination. These units join together via corner‐ and edge‐sharing to create a dense, three‐dimensional structure. Powder X‐ray diffraction indicates that the title compound is the major phase of the reaction product. Electronic structure calculations, performed using the full potential linearized augmented plane wave method within density functional theory (DFT), indicate that Li₂PbSiS₄ is a semiconductor with an indirect bandgap of 2.22 eV, which compares well with the measured optical bandgap of 2.51 eV. The noncentrosymmetric crystal structure and relatively wide bandgap designate this compound to be of interest for IR nonlinear optics.     

A functional model for polynomially posinormal operators

In this paper we introduce a class of operators naturally extending the classes of hyponormal and posinormal operators. For this class we construct a generating family of eigendistributions, unitary invariants and a functional model.     

Ternary rare-earth zinc arsenides REZn1-xAs2 (RE=La-Nd, Sm)

The ternary rare-earth zinc arsenides REZn_1−xAs₂ (RE=La-Nd, Sm) were prepared by reaction of the elements at 800 °C. Single-crystal and powder X-ray diffraction analysis revealed a defect SrZnBi₂-type average structure for the La member (Pearson symbol tI16, space group I4/mmm, Z=4; a=4.0770(9) Å, c=20.533(5) Å), in contrast to defect HfCuSi₂-type average structures for the remaining RE members (Pearson symbol tP8, space group P4/nmm, Z=2; a=4.0298(5)-3.9520(4) Å, c=10.222(1)-10.099(1) Å in the progression from Ce to Sm). The homogeneity range is not appreciable (estimated to be narrower than 0.6<1−x<0.7 in SmZn_1−xAs₂) and the formula REZn_0.67As₂ likely represents the Zn-rich phase boundary. The Ce-Nd members are Curie-Weiss paramagnets. LaZn_0.67As₂ shows activated behavior in its electrical resistivity, whereas SmZn_0.67As₂ exhibits anomalies in its temperature dependence of the electrical resistivity.     

On the Degree of Crystallinity from DSC in the Case of Multiple Melting of Synthetic Polymers

Considering the well‐known phenomenon of multimelting peak of crystalline polymers, it has been demonstrated that for calculating the degree of crystallinity using the heat of fusion, all the melting peaks observed have to be accounted for regardless of their origin‐recrystallization or presence of different crystalline modifications.     

On the relationship between microhardness and glass transition temperature of some amorphous polymers

On the basis of microhardness (H) data measured at room temperature only for a number of polymers in the glassy state, a linear correlation between H and the glass transition temperature T_g has been found (H = 1.97T_g − 571). By means of this relationship, the deviation of the H values from the additivity law for some multicomponent and/or multiphase polymeric systems can be accounted for. The latter usually contains a liquidlike soft component and/or phase with T_g below room temperature. A completely different deformation mechanism in comparison to systems with T_g above room temperature is invoked. A novel expression for the hardness of polymers in terms of crystallinity of the single components and/or phases, the T_g values, and the mass fraction of each component is proposed. This expression permits the calculation of (i) the room‐temperature H value of amorphous polymers, mainly containing single bonds in the main chain, provided T_g is known, and of (ii) the contribution of the soft liquidlike components (phases) to the hardness of the entire multiphase system. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1413–1419, 1999     

Chemical healing in poly(ethylene terephthalate)

A new molecular mechanism for the healing phenomenon in semicrystalline linear polycondensates (healing resulting from chemical reactions between macromolecules located in the interfacial surface) is demonstrated. Strips of commercial poly(ethylene terephthalate) are annealed at 258°C in order to avoid melt sticking. Two such strips are partially overlapped, pressed, and heated in a vacuum at 240°C for 10, 20, 30, and 100 h. By measuring the stress at break outside the contact area and the debonding shear stress the critical overlapping length is computed. It is concluded that transreaction contributes more than solid-state post-condensation to chemical healing.