Electrical and electrochemical characteristics of La<Subscript>0.6</Subscript>Sr<Subscript>0.4</Subscript>CoO<Subscript>3-δ</Subscript> cathode materials synthesized by a modified citrate-EDTA sol-gel method assisted with activated carbon for proton-conducting solid oxide fuel cell application

The electrical conductivity and electrochemical performance of a La_0.6Sr_0.4CoO_3-δ (LSC) cathode produced by a modified citrate-EDTA sol-gel method assisted with activated carbon are characterized for a proton-conducting solid oxide fuel cell (H⁺??SOFC) application at intermediate temperature. Thermogravimetric analysis revealed that the decomposition of the unrequired intermediate compounds in the precalcined powder was completed at 800?°C. A single LSC perovskite phase was formed at a calcination temperature of 900?°C, as confirmed by X-ray diffraction analysis. The particle size, crystallite size, and BET-specific surface area of the powder are 219–221?nm, 18?nm, and 9.87?m²?g^?1, respectively. The high index value of the extent of agglomeration (5.53) showed that the powder was barely agglomerated. Bulk LSC sintered at 1200?°C for 2?h showed the highest direct-current electrical conductivity (σ_d.c) compared to that of bulk LSC sintered at 1000?°C and 1100?°C. The value of σ_d.c was affected by the density and porosity of the sintered samples. The area specific resistance (ASR) of screen-printed LSC working on a proton conductor of BaCe_0.54Zr_0.36Y_0.1O_2.95 (BCZY) decreased from 5.0?Ω?cm²–0.06?Ω?cm² as the temperature increased from 500?°C to 800?°C with an activation energy of 1.079?eV. Overall, in this work, the LSC material produced with the aid of activated carbon meet the requirements for the application as a cathode in an intermediate temperature H⁺-SOFC.

Open image in new window

     

Enhanced hydrogen selectivity from catalytic decomposition of formic acid over FeZnIr nanocatalyst at room temperature

Research on Chemical Intermediates - Hydrogen is considered a promising energy carrier for the future, especially for clean energy generation via fuel cell technologies. Formic acid is one of the...     

Performance of Ni/10Sc1CeSZ anode synthesized by glycine nitrate process assisted by microwave heating in a solid oxide fuel cell fueled with hydrogen or methane

Journal of Solid State Electrochemistry - Nickel/scandia-ceria-stabilized-zirconia (Ni/10Sc1CeSZ) cermet is a potential anode for solid oxide fuel cells. The anode powder is prepared through a...     

Layering Optimization of the SrFe0.9Ti0.1O3−δ–Ce0.8Sm0.2O1.9 Composite Cathode

Cathode thickness plays a major role in establishing an active area for an oxygen reduction reaction in energy converter devices, such as solid oxide fuel cells. In this work, we prepared SrFe_0.9Ti_0.1O_3−δ–Ce_0.8Sm_0.2O_1.9 composite cathodes with different layers (1×, 3×, 5×, 7×, and 9× layer). The microstructural and electrochemical performance of each cell was then explored through scanning electron microscopy and electrochemical impedance spectroscopy (EIS). EIS analysis showed that the area-specific resistance (ASR) decreased from 0.65 Ωcm² to 0.12 Ωcm² with the increase in the number of layers from a 1× to a 7×. However, the ASR started to slightly increase at the 9× layer to 2.95 Ωcm² due to a higher loss of electrode polarization resulting from insufficient gas diffusion and transport. Therefore, increasing the number of cathode layers could increase the performance of the cathode by enlarging the active area for the reaction up to the threshold point.     

Optical,mechanical and electrical properties of LSCF–SDC composite cathode prepared by sol–gel assisted rotary evaporation technique

Journal of Sol-Gel Science and Technology - La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF) is a perovskite-type oxide that exhibits excellent mixed ionic–electronic conducting properties and is a...     

Influence of current collecting and functional layer thickness on the performance stability of La0.6Sr0.4Co0.2Fe0.8O3-δ-Ce0.8Sm0.2O1.9 composite cathode

Journal of Solid State Electrochemistry - The effect of current collecting layer (CCL) and cathode functional layer (CFL) thicknesses on the catalytic activity of the...     

Enhanced electrochemical performance of LSCF cathode through selection of optimum fabrication parameters

Journal of Solid State Electrochemistry - The aim of this work was to investigate the effect of three key fabrication parameters (thickness, solid content, and sintering temperature) on the...