A three-component cyclocondensation reaction for the synthesis of new triazolo[1,5-a]pyrimidine scaffolds using 3-aminotriazole,aldehydes and ketene N,S-acetal

Molecular Diversity - This study describes the use of 3-aminotriazole, different aldehydes and N-methyl-1-(methylthio)-2-nitroethenamine as a ketene N,S-acetal in a three-component condensation for...     

Aluminium(III)-selective electrode based on a newly synthesized tetradentate Schiff base

A PVC membrane electrode for aluminium ion based on bis(5-phenyl azo salicylaldehyde) 2,3-naphthalene diimine (5PHAZOSALNPHN) as an ion carrier was developed. The electrode exhibits a Nernstian slope of 19.3+/-0.8 mV per decade and a linear range of 5.0x10(-6)-1.0x10(-2) M for Al(NO(3))(3). The limit of detection is 2.5x10(-6) M. It has a fast response time of about 10 s and can be used for at least 10 weeks without observing any deviation. The proposed membrane sensor revealed good selectivity for Al(3+) over a wide variety of other metal ions and could be used in pH range of 2.9-5.0. It was used as an indicator electrode in potentiometric titration of aluminium ion.     

Synthesis and application of cinnamate-functionalized rubber for the preparation of UV-curable films

A butyl rubber derivative that can be cured upon exposure to UV light in the absence of additional chemical additives was developed. This polymer was prepared by the reaction of hydroxyl-functionalized butyl rubber with cinnamoyl chloride to provide a cinnamate functionalized rubber. The cinnamate content was varied by starting with derivatives prepared from butyl rubber containing either 2 or 7 mol% isoprene. The kinetics of the cross-linking was studied by UV–visible spectroscopy and it was found to vary according to the film thickness. The changes in gel content and volume swelling ratio with irradiation time were dependent on the cinnamate content. Toxicity studies suggested that the cross-linked materials do not leach toxic molecules. The approach was also applied to obtain cross-linked films of butyl rubber-poly(ethylene oxide) graft copolymers, leading to surfaces that resisted the adhesion and growth of cells. Thus the approach is versatile and is of particular interest when non-leaching coatings of cross-linked butyl rubber are desired for biomedical or other applications.     

Synthesis of Poly (methyl methacrylate)/Zinc Oxide Nanocomposite with Core-Shell Morphology by Atom Transfer Radical Polymerization

A method to prepare zinc oxide (ZnO) nanoparticles with a covalently bonded poly(methyl methacrylate) (PMMA) shell by surface initiated atom transfer radical polymerization (ATRP) was reported. First, the initiator for ATRP was covalently bonded onto the surface of zinc oxide nanoparticles through our novel method. Firstly, the surface of ZnO nanoparticle was treated with 3-aminopropyl triethoxysilane, a silane coupling agent, and then this functionalization nanoparticle was reacted with α-chloro phenyl acetyl chloride to prepare atom transfer radical polymerization macroinitiator. The metal-catalyzed radical polymerization of MMA with ZnOmacroinitiator was performed using a copper catalyst system to give the ZnO-based nanoparticles hybrids linking PMMA segments (poly (methyl methacrylate)/zinc oxide nanocomposite). These hybrid nanoparticles had an exceptionally good dispersability in organic solvents and were subjected to detailed characterization using FTIR, TEM and TGA and DSC analyzed.     

Biogas Production from N-Methylmorpholine-N-oxide (NMMO) Pretreated Forest Residues

Lignocellulosic biomass represents a great potential for biogas production. However, a suitable pretreatment is needed to improve their digestibility. This study investigates the effects of an organic solvent, N-Methylmorpholine-N-oxide (NMMO) at temperatures of 120 and 90 °C, NMMO concentrations of 75 and 85 % and treatment times of 3 and 15 h on the methane yield. The long-term effects of the treatment were determined by a semicontinuous experiment. The best results were obtained using 75 % NMMO at 120 °C for 15 h, resulting in 141 % increase in the methane production. These conditions led to a decrease by 9 % and an increase by 8 % in the lignin and in the carbohydrate content, respectively. During the continuous digestion experiments, a specific biogas production rate of 92 NmL/gVS/day was achieved while the corresponding rate from the untreated sample was 53 NmL/gVS/day. The operation conditions were set at 4.4 gVS/L/day organic loading rate (OLR) and hydraulic retention time (HRT) of 20 days in both cases. NMMO pretreatment has substantially improved the digestibility of forest residues. The present study shows the possibilities of this pretreatment method; however, an economic and technical assessment of its industrial use needs to be performed in the future.     

Synthesis,characterization, and design of a photocatalyst based on BiOBr nanoplates and tin porphyrin with enhanced visible light photocatalytic activity

Research on Chemical Intermediates - The bismuth oxybromide (BiOBr) photocatalyst was first synthesized via a simple co-precipitation method. To improve the visible light photocatalytic activity of...     

Design and characteristics of tin (II) optode based on immobilization of dithizone on a triacetylcellulose membrane and its application in canned foods

Abstract  

The characterization of an optical sensor membrane is described for the determination of tin (II) based on the immobilization of dithizone on a triacetylcellulose membrane. The membrane responds to tin (II) ions by changing color reversibly from green to red in buffer solution at pH 6 and wavelength 611 nm. This optode has a linear range of 0.3–6.33 μg cm⁻³ (2.52–53.32 μmol dm⁻³) of Sn²⁺ ions with a limit of detection of 0.15 μg cm⁻³ (1.26 μmol dm⁻³). The response time of the optode was about 8–10 min depending on the concentration of Sn²⁺ ions. The selectivity of the optode to tin (II) ions at pH 6 was good. The sensor can be readily regenerated by exposure with EDTA solution. The color is fully reversible, and the optical sensor could be fully regenerated. Experimental results showed that the optode could be used as an effective tool in analyzing the tin content in canned foods.     

New Re(I) tricarbonyl-diimine complexes with N,N′-bis(substituted benzaldehyde)-1,2-diiminoethane Schiff base ligands: Synthesis,spectroscopic and electrochemical studies and crystal structures

The syntheses, structures and spectroscopic properties of tricarbonylrhenium(I) complexes with N,N′-bis(2-bromo, 4-bromo, 4-chloro and 3-methoxybenzaldehyde)-1,2-diiminoethane Schiff base ligands have been investigated in this paper. Characterization of these complexes was carried out with FTIR, NMR, UV–Vis spectroscopy, elemental analysis and X-ray crystallography. The electrochemical behavior of the investigated complexes has been studied by cyclic voltammetry. The crystal structures of the 4-chloro, 4-bromo and 4-methoxy substituted complexes are stabilized by intermolecular C–H?Cl and C–H?O hydrogen bonds. The remarkable features of the 2-bromo, 4-bromo and 4-chloro substituted complexes are short intermolecular halogen–oxygen contacts. In the 4-bromo complex, short intermolecular Br?O and O?O contacts link neighboring molecules along the [1 0 0] direction, which are further stabilized by short intermolecular π?π interactions. In 2-bromo complex, intermolecular Br?O interactions link neighboring molecules into 1D extended chains along the [0 1 0] and [0 0 1] directions, forming a 2D network which is parallel to the bc-plane.