面心立方晶体外延膜沉积生长中失配位错的结构与形成过程

用分子动力学方法对5%负失配条件下面心立方晶体铝薄膜的原子沉积外延生长进行了三维模拟.铝原子间的相互作用采用嵌入原子法(EAM)多体势计算.模拟结果再现了失配位错的形成现象.分析表明，失配位错在形成之初即呈现为Shockley扩展位错，即由两个伯格斯矢量为〈211〉/6的部分位错和其间的堆垛层错组成，两个部分位错的间距、即层错宽度为1.8 nm,与理论计算结果一致；外延晶体薄膜沉积生长中，位错对会发生滑移，但其间距保持稳定.进一步观察发现，该扩展位错产生于一种类似于“局部熔融-重结晶”的表层局部无序紊乱- 关键词： 失配位错 外延生长 薄膜 分子动力学 铝     

Influence of support properties on the sound radiated from the vibrations of rectangular plates

The control of the forced vibration response of structures through the optimal tuning of its supports is desirable in many applications. Tuning may enhance the dissipation of vibration energy within the supports, thereby reducing fatigue and structure-borne noise. Two different models were developed to calculate the optimal support stiffness that minimizes the velocity response of homogeneous plates. The first model, based on the wave propagation at the edge, yields a good first cut approximation of the optimal properties. The optimal viscous and viscoelastic support stiffness for minimal reflection at the edge was calculated. Maximum absorption of the incident waves occurs when the viscous support stiffness matches the characteristic mechanical impedances of the plate. The second model, based on the Rayleigh-Ritz method, yields more accurate estimates of the optimal support stiffness required to minimize the forced velocity response of the finite rectangular plate. The optimal support properties calculated from the two different methods were in good agreement. This suggested that the modal response of the plate is strongly influenced by the wave reflections at the edges. Finally, the effects of support properties on the sound radiated from the plate were investigated. The optimal support stiffness that minimizes the radiated sound power was found to be smaller than the value that minimizes the velocity response. The results show that both the velocity response and sound radiation are strongly influenced by dissipation of vibration energy at the edges, and demonstrate that support tuning can yield significant noise and vibration reduction.     

Analytic continuation and identities involving heat,Poisson, wave and Bessel kernels

In this article we use classical formulas involving the K–Bessel function in two variables to express the Poisson kernel on a Riemannian manifold in terms of the heat kernel. We then use the small time asymptotics of the heat kernel on certain Riemannian manifolds to obtain a meromorphic continuation of the associated Poisson kernel to all values of complex time with identifiable singularities. This result reproves in a different setting by different means a well–known theorem due to Duistermaat and Guillemin [DG 75]. Also, we develop analytic expressions for the heat kernel beyond asymptotic expansions. (© 2003 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Zeeman transitions in deuterium atoms induced by ultra-relativistic electrons

We present data showing hyperfine transitions in an atomic deuterium beam induced by the (476 MHz) radio-frequency field of a 704 MeV electron beam in a storage ring. A polarized deuterium beam, produced in an atomic beam source, was crossed with a stored electron beam and analyzed with a Breit--Rabi polarimeter. Electron-beam induced transitions were singled out by injecting different combinations of hyperfine states. Transition probabilities as high as 70% were measured at large currents (~ 100 mA). All possible deuterium transitions for a radio-frequency of 476 MHz were observed. In addition, a 1--6 transition resulting from the first harmonic (952 MHz) was observed. The effects of these transitions are of general importance for the polarized internal target technique applied in nuclear and particle physics experiments. The data are reasonably described by numerical estimates. The observed mechanism can be exploited to create nuclear polarized atoms when injecting electron polarized atoms with no net nuclear polarization into a storage cell. However, when nuclear polarized atoms are injected, care should be taken to avoid this mechanism, since it would result in depolarization of the atoms. The studies enabled us to choose the magnetic guide field during our spin-dependent electron--deuteron scattering experiments, such that electron-beam induced depolarizing effects were avoided. This revised version was published online in July 2006 with corrections to the Cover Date.     

New polaron effect in magnetooptic phenomena in a quantum well

It is predicted that resonance coupling between two discrete electron energy levels corresponding to different size-quantization quantum numbers and different Landau quantum numbers can occur in a quantum well in a quantizing magnetic field. The resonance coupling is due to the interaction of an electron with LO phonons and results in the formation of polaron states of a new type. It is shown that for a certain value of the magnetic field, which depends on the splitting of the electron size-quantization levels, the absorption peak and the two-phonon resonance Raman scattering peak split into two components, the separation between which is determined by the electron-phonon coupling constant. The resonance coupling between size-quantization levels with the same Landau quantum numbers is also studied. The splitting of the peaks in this case is virtually independent of the magnetic field and can be observed in much weaker fields. The experimental observation of the effect will make it possible to determine the relative position of the electronic levels and the electron-phonon coupling constant. Pis’ma Zh. éksp. Teor. Fiz. 65, No. 7, 511–515 (10 April 1997)     

Preparing polymer brushes on polytetrafluoroethylene films by free radical polymerization

Films of polytetrafluoroethylene (PTFE) were exposed to sodium naphthalenide (Na/naphtha) etchant so as to defluorinate the surface for obtaining hydroxyl functionality. Surface-initiators were immobilized on the PTFE films by esterification of 4,4′-azobis(4-cyanopentanoic acid) (ACP) and the hydroxyl groups covalently linked to the surface. Grafting of polymer brushes on the PTFE films was carried out by the surface-initiated free radical polymerization. Homopolymers brushes of methyl methacrylate (MMA) were prepared by free radical polymerization from the azo-functionalized PTFE surface. The chemical composition and topography of the graft-functionalized PTFE surfaces were characterized by X-ray photoelectron spectroscopy (XPS), attenuated total reflectance (ATR) FT-IR spectroscopy and atomic force microscopy (AFM). Water contact angles on PTFE films were reduced by surface grafting of MMA.     

Local-moment and itinerant antiferromagnetism in the heavy-fermion system Ce(Cu1−xNix)2Ge2

Elastic and inelastic neutron-scattering studies on the system Ce(Cu_1?xNi_x)₂Ge₂ are reported. These measurements are complemented by measurements of the magnetic susceptibility, high-field magnetization, heat capacity, thermal expansion, electrical resistivity and thermopower. The results reveal an interesting T-x phase diagram consisting of two different antiferromagnetic phases for x < 0.2 and 0.2 < x < 0.75, respectively, and a heavy-Fermi-liquid regime at higher Ni concentrations. The experimental results are interpreted in terms of an alloying-induced transition from local-moment to itinerant heavy-fermion magnetism. Fingerprints of this latter phase are a strongly reduced ordered moment and a short incommensurate ordering wave vector, in accord with theoretical predictions. A surprisingly good agreement between theory and experiment is found for x > 0.5. Further experimental evidence for different types of antiferromagnetic ordering derives from a line-shape analysis of the quasielastic neutron-scattering intensity, from magnetization and thermopower experiments.