Studies with model membranes

Summary Thermodynamic effective fixed charge densities of mercuric phosphate and carbonate parchment supported membranes were evaluated by a number of methods particularly those ofTeorell-Meyer-Sievers, Altug andHair andKobatake et al. The value of the permselectivity was obtained for the two membranes based onKobatake et al. procedure. Membrane transport number was calculated using a modified Nernst relation and compared with the values determined by the TMS method. The theoretical predictions for membrane potential usingKobatake et al. equation are borne out quite satisfactorily by our experimental results for both membrane.

---

Zusammenfassung Es wurden die Dichte der fixierten Ladungen von Quecksilberphosphat und Quecksilberkarbonat-Niederschlagsmembranen nach den Methoden vonTorell-Meyer-Sievers, Altug undHair undKobatake bestimmt. Weiterhin wurden Durchlässigkeit und Transportzahlen ermittelt und mit Werten der TMS-Methode verglichen. Theoretische Voraussagen über das Membranpotential nach den Gleichungen vonKobatake stimmen mit den experimentellen Ergebnissen überein.

---

---

With 8 figures and 3 tables     

Reactions of [(Cp)2Ti(NCS)2] as a potential metalloligand; synthesis and physico-chemical investigations of novel heterobimetallic complexes

Summary Bis(cyclopentadienyl)titanium(IV) diisothiocyanate [(Cp)₂-Ti(NCS)₂] reacts with MCl₂ (M = Cu, Pd or Pt), [CuCl(PPh₃)₃], [RuCl₂(PPh₃)₃] and [RuCl₂(DMSO)₄] (DMSO = dimethylsulphoxide) giving solid compounds of stochiometry [(Cp)₂Ti(-NCS)₂MCl₂] (M = Cu, Pd or Pt), [(Cp)₂Ti(-NCS)₂CuCl(PPh₃)], [(Cp)₂Ti(-NCS)₂-RuCl(PPh₃)₂]Cl and [(Cp)₂Ti(-NCS)₂RuCl₂(DMSO)2]. These products have been characterized by physicochemical and spectroscopic methods.     

Synthesis and characterization of some Schiff-base-containing polyimides

The diamine, 4-aminophenyloxy-N-4-[(4-amiophenyloxy)benzylidene]aniline, was prepared via the nucleophilic substitution reaction and was polymerized with different dianhydrides either by one-step solution polymerization reaction or two-step procedure. The latter includes ring-opening polyaddition to give poly(amic acid), followed by cyclodehydration to polyimides. The inherent viscosity ranges from 0.61–0.79 dl/g. Some of the polymers were soluble in most of the organic solvents such as DMSO, DMF, DMAc, NMP, and m-cresol even at room temperature. The degradation temperature of the resultant polymers falls in the ranges from 240–500 °C in nitrogen with only 10% weight loss. Specific heat capacity at 200 °C ranges from 1.0929–2.6275 J g⁻¹ k⁻¹. The temperature at which the maximum degradation of the polymer occurs ranges from 600–630 °C. The glass transition temperature (Tg) values of the polyimides ranged from 185 to 272 °C. The activation energy and enthalpy of the polyimides ranged from 47.5–55.0 kJ/mole and 45.7–53.0 kJ/mole and the moisture absorption in the range of 0.23–0.72%.     

Titanium(IV) tungstosilicate and titanium(IV) tungstophosphate: two new inorganic ion exchangers

Crystalline phases of Ti(IV) tungstosilicate and Ti(IV) tungstophosphate have been synthesised. The ion-exchange capacities of Ti(IV) tungstosilicate and Ti(IV) tungstophosphate have been reported as 0.44 and 0.80 mequiv./g, respectively. Both materials show monofunctional ion-exchange characteristic and are stable in 0.1 M solutions of HNO3, HCl, H2SO4 and acetone and benzene. Ti(IV) tungstosilicate is found to be more stable thermally than Ti(IV) tungstophosphate (loss in ion-exchange capacity was found as 58 and 80%, respectively for samples heated at 200 degrees C). The Kd values for heavy metals such as Pb, Hg, Cd, Sb, Co, Zn, Ni, Fe, Cr etc. have been reported in demineralised water and two surfactant media by batch processes. Cr3+, Fe3+ and Sn4+ are totally adsorbed on both the materials in demineralised water while a decrease in Kd value with increase in concentration of two surfactants is reported. On the basis of Kd values for metal ions, thirteen binary separations and five ternary separations on Ti(IV) tungstosilicate and thirteen different binary separations and four different ternary separations on Ti(IV) tungstophosphate have been achieved. Separation of methylamine from ethylamine has been done by GC on a column packed with Ti(IV) tungstophosphate.     

SINGLE- and DOUBLE-STRAND BREAK FORMATION IN DOUBLE-STRANDED DNA UPON NANOSECOND LASER-INDUCED PHOTOIONIZATION

Double-stranded (ds) calf thymus DNA (0.4 mM), excited by 20 ns laser pulses at 248 nm, was studied in deoxygenated aqueous solution at room temperature and pH 6.7 in the presence of a sodium salt (10 mM). The quantum yields for the formation of hydrated electrons (phi c-), single-strand breaks (phi ssb) and double-strand breaks (phi dsb) were determined for various laser pulse intensities (IL). phi c- and phi ssb increase linearly with increasing IL; however, phi ssb has a tendency to reach saturation at high IL (greater than 5 X 10(6) Wcm-2). The ratio phi ssb/phi c-, representing the number of ssb per radical cation, is about 0.08 at IL less than or equal to 5 X 10(6) Wcm-2. For comparison, the number of ssb per OH radical reacting with dsDNA is 0.22. On going from argon to N2O saturation, phi ssb and phi dsb become larger by factors of approximately 5 and 10-15, respectively. This enhancement is produced by attack on DNA bases by OH radicals generated by N2O-scavenging of the photoelectrons. While phi ssb is essentially independent of the dose (Etot), phi dsb depends linearly on Etot in both argon- and N2O-saturated solutions. The linear dependence of phi dsb implies a square dependence of the number of dsb on Etot. This portion of dsb formation is explained by the occurrence of two random ssb, generated within a critical distance (h) in opposite strands. For both argon- and N2O-saturated solutions h was found to be of the order of 40-70 phosphoric acid diester bonds. On addition of electron scavengers such as 2-chloroethanol (or N2O plus t-butanol), phi dsb is similar to that in neat, argon-saturated solutions. Thus, hydrated electrons are not involved in the chemical pathway leading to laser-pulse-induced dsb of DNA.     

Peroxidase-catalysed rupture of the CF bond as and indicator reaction for enzyme immunoassay : Kinetic determination of human immunoglobulin G, α-fetoprotein and placental lactogen

A fluoride ion-selective electrode is utilized as a sensor for the kinetic determination of peroxidase label in enzyme immunoassays. The method is based on a sandwich enzyme-linked immunosorbent assay (ELISA) technique, the peroxidase-catalysed rupture of the covalent CF bond in 4-fluorophenol and the subsequent release of fluoride ions. The determination of human immunoglobulin G (lgG), human α-fetoprotein (AFP) and human placental lactogen (HPL) was investigated. The potentiometric measurement of the rate of release of fluoride ion within 5 min provided a direct correlation with the concentration of analyte present in the sample. The concentration ranges investigated for the analytes were IgG 30 μg l^?1–10mg l^?1, AFP 5–500 μg l^?1 and HPL 60 ng l^?1–1 mg l^?1. Under the given experimental conditions, the detection limits were IgG 30, AFP 12.8 and HPL 1 μg l^?1. Replacing the rate method with the fixed-time mode (15–30 min) did not improve the detection limits. The performance of the present method was found to be comparable to that of the spectrophotometric detection technique.     

Polymerization of Ethylene by Silica‐Supported Dinuclear CrIII Sites through an Initiation Step Involving C?H Bond Activation

The insertion of an olefin into a preformed metal–carbon bond is a common mechanism for transition‐metal‐catalyzed olefin polymerization. However, in one important industrial catalyst, the Phillips catalyst, a metal–carbon bond is not present in the precatalyst. The Phillips catalyst, CrO₃ dispersed on silica, polymerizes ethylene without an activator. Despite 60 years of intensive research, the active sites and the way the first Cr C bond is formed remain unknown. We synthesized well‐defined dinuclear Cr^II and Cr^III sites on silica. Whereas the Cr^II material was a poor polymerization catalyst, the Cr^III material was active. Poisoning studies showed that about 65 % of the Cr^III sites were active, a far higher proportion than typically observed for the Phillips catalyst. Examination of the spent catalyst and isotope labeling experiments showed the formation of a Si–(μ‐OH)–Cr^III species, consistent with an initiation mechanism involving the heterolytic activation of ethylene at Cr^III O bonds.     

Preparation and characterization of novel polyimide‐silica hybrids

Polyimide‐silica (PI‐SiO₂) hybrids were prepared from a novel polyimide (PI), derived from pyromellitic dianhydride (PMDA), 1,6‐bis(4‐aminophenoxy)hexane (synthesized) and 4,4′‐oxydianiline. SiO₂ networks (5–30 wt%) were generated through sol–gel process using either tetraethylorthosilicate (TEOS) or a mixture of 3‐aminopropyltriethoxysilane‐PMDA‐based coupling oligomers (APA) and TEOS. Thin, free standing hybrid films were obtained from the respective mixtures by casting and curing processes. The hybrid films were characterized using Fourier transform infrared, ²⁹Si nuclear magnetic resonance (NMR), field emission scanning electron microscopy (FE‐SEM), energy dispersive X‐ray spectrometry and atomic force microscopy (AFM) techniques. ²⁹Si NMR results provide information about formation of organically modified silicate structures that were further substantiated by FE‐SEM and AFM micrographs. Contact angle measurements and thermogravimetric thermograms reveal that the addition of APA profoundly influences surface energy, interfacial tension, thermal stability and the residual char yield of modified hybrids in comparison to those obtained by mixing only TEOS. It was found that reduced particle size, efficient dispersion and improved interphase interactions were responsible for the eventual property enhancement. Copyright © 2012 John Wiley & Sons, Ltd.     

Magnetic Behaviour of Sm2Co7/Fe/Sm2 Co7, Nanocomposite Trilayers with Cr and Ti Additions

Trilayered Sm2Co7/Fe/Sm2Co7 spring exchange magnets are fabricated by dc magnetron sputtering on MgO substrates. Very thin layers （0.3-0.7 nm） of Cr and Ti are added at the interfaces of the two magnetic phases. The thickness of StucCo7 is kept at 20nm and Fe at 6nm while the thickness of Cr and Ti are varied as 0.3, 0.5, and 0.7nm. The base pressure of sputtering chamber is kept below 10^-7 Torr and Ar pressure at 3-8m Torr. The samples are characterized by x-ray diffraction （XRD） and SQUID magnetometer. We report improvement in exchange coupling of nonacomposite magnets by addition of thin layers of Cr at interfaces.