Molybdenum nitride fibers or tubes via ammonolysis of polysulfide precursor

Millimeter-sized molybdenum nitride (MoN), in the forms of fiber-like prisms or hollow tubes, has been successfully synthesized via thermal ammonolysis of molybdenum polysulfide precursor. The initial morphology of the precursor is well preserved in the final product. This method could be expanded to preparation of other fiber-like nonmetal ceramics without addition of template. The polysulfide precursor (abbreviated to PS), hydrothermally prepared at 30°C (PS1) or 150°C (PS2), was characterized by various methods for better comprehension of the sulfide-nitride topotactic conversion model.     

A new method for determination of uric acid by the lactic acid-acetone-BrO(3)(-)-Mn(2+)-H(2)SO(4) oscillating reaction using the analyte pulse perturbation technique

A new analytical method for the determination of uric acid (UA) by the perturbation of UA on the Belousov-Zhabotinsky oscillating reaction is proposed. The method is based on the linear relationship between the changes in the oscillating period and the concentration of UA. The calibration curve is linear over the range of 2.0 × 10⁻⁵ to 5.0 × 10⁻⁴ M, with a detecting limit of 3.28 × 10⁻⁶ M. The method features good precision (R.S.D.: 3.59%) and excellent throughput (10 samples h⁻¹). The possible mechanism of the perturbation of UA on the oscillating reaction is discussed.     

Rearrangement Free Method for Hardy-Littlewood-Sobolev Inequalities on $\mathbb{S}^n$

For conformal Hardy-Littlewood-Sobolev(HLS) inequalities [22] and reversed conformal HLS inequalities [8] on $\mathbb{S}^n,$ a new proof is given for the attainability of their sharp constants. Classical methods used in [22] and [8] depends on rearrangement inequalities. Here, we use the subcritical approach to construct the extremal sequence and circumvent the blow-up phenomenon by renormalization method. The merit of the method is that it does not rely on rearrangement inequalities.     

A novel chain-like molybdenum phosphate: hydrothermal synthesis,crystal structure and characterization of [NH3(CH2CH2)2NH3]3[NH3(CH2CH2)2NH2]-Na5[Mo6O12(OH)3(PO4)(HPO4)3]2·4H2O

A novel organic/inorganic hybrid molybdenum phosphate, [NH₃(CH₂CH₂)₂NH₃]₃[NH₃(CH₂CH₂)₂NH₂]Na₅-[Mo₆O₁₂(OH)₃(PO₄)(HPO₄)₃]₂·4H₂O (1), involving molybdenum presented in V oxidation, has been hydrothermally prepared and characterized by elemental analysis, i.r., u.v.–vis., x.p.s., t.g. and single crystal X-ray diffraction. The structure of the title compound (1) may be considered to consist of two [Mo₆O₁₂(OH)₃(PO₄)(HPO₄)₃] units bonded together with NaO₆ octahedra, forming dimers. Further, these dimers connect with each other through four Na⁺ cations as bridges, giving rise to novel one-dimensional chain-like skeleton. Piperazines exist among inorganic chains acting as charge balancing cations.     

核工程钢板混凝土墙防撞击贯穿实用计算方法

针对带对拉钢筋的双钢板混凝土墙,研究了双钢板混凝土墙防贯穿计算方法,建立了基于能量法的防贯穿计算公式。在已知弹体和钢板混凝土墙体材料与几何相关参数时,利用防贯穿实用计算公式可对带对拉钢筋的核工程双钢板混凝土墙体贯穿速度以及弹体剩余速度进行计算,避免了复杂的结构抗撞击反应动力时程数值分析。为验证公式的可靠性,将公式计算结果与已有刚性弹体撞击双钢板混凝土墙实验结果及其动力有限元计算结果进行对比,结果表明：防贯穿实用计算公式可以正确判断双钢板混凝土墙的贯穿状态,实用计算公式给出的弹体剩余速度与实验结果符合良好。为进一步验证公式的适用范围,将公式计算结果与共10个工况的飞机发动机撞击双钢板混凝土墙的有限元计算结果进行了对比分析,结果表明：除1个工况计算结果偏差略超10%外,其余工况的偏差均在10%以内,说明该计算方法合理可行。

     

肝素非还原端饱和结构的紫外吸收研究及在肝素寡糖测序中的应用

为了进一步探讨非还原端饱和结构的肝素寡糖在UV 232 nm的吸收情况, 制备了4种饱和结构的肝素二糖, 并用离子对反相液相色谱/离子阱飞行时间质谱(RPIP-LC/MS-IT-TOF)光电二极管阵列检测器分析了它们在UV 232 nm的吸收情况. 分析结果表明, 饱和结构的肝素二糖在UV 232 nm的检出限为9 μg(S/N=10), UV 232 nm/UV 206 nm约为不饱和结构肝素二糖UV 232 nm的7%~40%. 结果还表明, 肝素二糖UV 232 nm的吸收强度受亚硫酸基团(SO₃^2?)影响较大. 另外, 通过比较不饱和结构的肝素/硫酸类肝素(Hep/HS)标样二糖发现, 含N-未取代葡萄糖胺(GlcNH₃⁺)基团的二糖在UV 232 nm的吸收值较低. 最后, 通过简单的UV检测方法, 结合 HNO₂(pH=4.0)裂解法和RPIP-LC/MS-IT-TOF分析, 简化了含GlcNH₃⁺肝素六糖的测序方法. 本研究为以后用 HNO₂(pH=1.5)裂解法对混合组分N-硫酸化的肝素寡糖结构序列分析提供了可能.     

丙酮在XeCl准分子激光辐射下的多光子电离和碎裂研究

我们用扩散分子束多光子电离光谱技术研究了丙酮在XeCl准分子激光辐射下的多光子电离和碎裂行为。实验表明丙酮没有产生母体离子峰(m/e=58), 只给出m/e=43和15两个峰, 分别对应于丙酮光解所产生的两个碎片CH_3 CO和CH_3。其离子信号(1)分别与激光强度(Ⅰ)的3和3.6次方成正比。分析表明离子是由中性碎片电离产生的。     

通过SAPO-34分子筛笼中引入金属物种提升甲醇制烯烃反应中乙烯选择性

低碳烯烃(乙烯、丙烯)是化学工业极其重要的基本原料.甲醇制烯烃(MTO)反应是重要的烯烃生产石油替代路线.其中,磷酸硅铝类SAPO-34分子筛在MTO反应中表现出优异的低碳烯烃选择性.与丙烯相比,乙烯具有更高的经济附加值,因此提升MTO反应中乙烯的选择性有着重要的意义.本文采用传统离子交换法(CIE)、模板辅助离子引入法(TII)和醇相离子交换法(AIE)对SAPO-34分子筛进行金属Zn、Cu改性,利用多种表征手段对金属Zn、Cu改性SAPO-34分子筛的物理结构、化学组成、金属物种状态与分布、酸性及扩散性质等进行表征.首先,对金属Zn、Cu改性SAPO-34分子筛的物理结构和化学组成进行分析.X射线衍射表明,相比AIE法,CIE法和TII法改性基本保持SAPO-34分子筛的结晶度.X射线荧光分析表明,相比Co、Ni,金属Zn、Cu更易引入SAPO-34分子筛.N2物理吸附-脱附表明,CIE法改性能够保持SAPO-34分子筛的BET比表面积和微孔孔容.其次,考察了金属Zn、Cu改性SAPO-34分子筛中金属物种的状态.氢气-程序升温还原(H2-TPR)和X射线光电子能谱(XPS)结果表明,Zn物种主要以孤立态的Zn2+阳离子形式存在.H2-TPR、XPS、紫外-可见光谱和电子顺磁共振谱结果表明,Cu物种主要以孤立态的Cu2+阳离子以及部分CuO形式存在.继而对金属Zn、Cu改性SAPO-34分子筛中金属物种的分布进行表征.XPS表明,Zn阳离子改性的SAPO-34表层富硅、富Zn,呈类核壳结构;XPS和扫描式电镜-能量色散X射线光谱结果表明,Cu物种在Cu改性SAPO-34分子筛中均匀分布.进一步研究了金属Zn、Cu改性SAPO-34分子筛中酸性的变化.氨气-程序升温脱附和核磁共振氢谱结果表明,Zn、Cu改性SAPO-34酸性位点的酸量降低.最后,对金属Zn、Cu改性SAPO-34分子筛的扩散性质进行分析.智能重量分析表明,Zn、Cu阳离子的引入降低探针分子(乙烷、丙烷)的扩散系数,推断Zn、Cu阳离子的引入增加对MTO反应产物的扩散限制.热重表明,Zn阳离子改性SAPO-34分子筛反应初期积炭量略微增加.综上所述,Zn阳离子改性SAPO-34催化剂表层富硅、富Zn,呈现类核壳结构.Zn阳离子的引入增加对MTO反应产物的扩散限制,而且Zn阳离子的引入促进MTO反应初始阶段的碳沉积.因此,Zn阳离子改性SAPO-34分子筛显著增加MTO反应产物的扩散限制,对分子尺寸较大的反应产物的扩散限制更为明显,从而提高MTO反应初始阶段的乙烯选择性,增大乙烯/丙烯比.     

Preparation of a Carbon-Coated SPME Fiber and Application to the Analysis of BTEX and Halocarbons in Water

A carbon-coated fiber for solid-phase microextraction (SPME) has been prepared from powdered activated carbon (PAC) and a fused-silica fiber. Scanning electron microscopy of the coating revealed the carbon particles were uniformly distributed on the surface of the fiber substrate. Efficient extraction of BTEX (benzene, toluene, ethylbenzene, p-xylene, and o-xylene) and halocarbons (chloroform, trichloroethylene, and carbon tetrachloride), with short extraction and desorption times, was achieved by use of the coated fiber. The maximum working temperature of the coated fiber was 300 °C and the lifetime was over 140 desorption operations at 260 °C. Limits of quantification (LOQ) of the SPME method for the eight analytes ranged from 0.01 to 0.94 μg L⁻¹, and relative standard deviations (RSD) were below 7.2% (n=6). Recoveries were 87.9–113.4% when the method was applied to the analysis of BTEX and the halocarbons in real aqueous samples. An erratum to this article is available at .     

Preparation of PVDF porous membranes by using PVDF-g-PVP powder as an additive and their antifouling property

The hydrophilic PVDF-g-PVP powder was used as additive to prepare a series of PVDF/PVDF-g-PVP blend porous membranes via an immersion precipitation phase inversion process. FTIR-ATR measurements confirmed that the hydrophilic PVP preferentially segregated to the interface between membrane and coagulant. SEM images showed that there was no big change in the membrane cross-section with the amount of PVDF-g-PVP increased. However, the membrane surface roughness increased with the amount of PVDF-g-PVP increased according to AFM data. The mean pore size of membranes reached max when the amount of PVDF-g-PVP was 10 wt%. The water contact angle and filtration experiments revealed that the surface enrichment of PVP endowed the membranes with significantly enhanced surface hydrophilicity and protein-adsorption resistance. The flux recovery of the porous membranes was increased from 37.50% to 77.23% with the amount of PVDF-g-PVP increased from 0 to 50 wt%, also indicating that the antifouling property of the porous membranes was improved.