非线性控制系统的最小实现

对于那些由代数微分方程描述的具有输入输出关系的非线性控制系统，本文采用两种方法讨论了其最小实现问题：一种方法是直接计算系统的特征列；另一种方法则采用了本原元定理．两种方法给出的最小实现所需的状态变量最小数目是相等的．文中的大量代数与微分运算则可利用数学机械化来完成     

Triple Positive Solutions of Boundary Value Problems for High-order Fractional Differential Equation at Resonance with Singularities

In this paper, we investigate the existence of triple positive solutions of boundary value problems for high-order fractional differential equation at resonance with singularities by using the fixed point index theory and the Leggett-Williams theorem. The spectral theory and some new height functions are also employed to establish the existence of triple positive solutions. The nonlinearity involved is arbitrary fractional derivative, and permits singularity.     

Preparation of Nano-Sized γ-Al2O3 Supported Iron Catalyst for Fischer-Tropsch Synthesis by Solvated Metal Atom Impregnation Methods

Two types of small iron clusters supported on γ-Al2O3-RT(dehydroxylated at room temperature) and γ-Al2O3-800 (dehydroxylated at 800 ℃) were prepared by solvated metal atom impregnation (SMAI) techniques. The iron atom precursor complex, bis(toluene)iron(0) formed in the metal atom reactor, was impregnated into γ-Al2O3 having different concentrations of surface hydroxyl groups to study the effect of surface hydroxylation on the crucial stage of iron cluster formation. Catalysts prepared in this way were characterized by TEM, M(o)ssbauer, and chemisorption measurements, and the results show that higher concentration of surface hydroxyl groups of γ-Al2O3-RT favors the formation of more positively charged supported iron cluster Fen/γ-Al2O3-RT, and the lower concentration of surface hydroxyl groups of γ-Al2O3-800 favors the formation of basically neutral supported iron cluster Fen/γ-Al2O3-800. The measured results also indicate that the higher concentration of surface hydroxyl groups causes the rapid decomposition of precursor complex, bis(toluene)iron(0), and favors the formation of relatively large iron cluster. Consequently, these two types of catalysts show different catalytic properties in Fischer-Tropsch reaction. The catalytic pattern of Fen/γ-Al2O3-RT in F-T reaction is similar to that of the unreduced α-Fe2O3 and that of Fen/γ-Al2O3-800 is similar to that of the reduced α-Fe2O3.     

均匀棒状过氧化氢合碳酸钠制备及非等温热分解动力学

本文制备了均匀棒状过氧化氢合碳酸钠，化学分析确定其组成为Na₂CO₃·1.5H₂O₂，用DTA-TG-DTG技术并辅以X-ray分析研究了它在静态空气、流动氧气和流动氮气气氛中的非等温热分解过程及动力学。     

Synthesis, structural, spectroscopic, and electrochemical characterization of high oxidation state diruthenium complexes containing four identical unsymmetrical bridging ligands

Six Ru2(6+) derivatives of the form Ru2(L)4(C[triple bond]CC6H5)(2), where L = 2-Fap, 2,3-F(2)ap, 2,4-F(2)ap, 2,5-F(2)ap, 3,4-F(2)ap, or 2,4,6-F(3)ap, are synthesized and characterized as to their electrochemical, spectroscopic, and/or structural properties. These compounds are synthesized from a reaction between LiC[triple bond]CC6H5 and Ru2(L)4Cl. Two of the investigated complexes exist in a (4,0) isomeric form while four adopt a (3,1) geometric conformation. These two series of geometric isomers are compared with previously characterized (4,0) Ru2(ap)4(C[triple bond]CC6H5)(2), (4,0) Ru2(F5ap)4(C[triple bond]CC6H5)(2), and (3,1) Ru2(F5ap)4(C[triple bond]CC6H5)(2). The overall data on the nine compounds thus provide an opportunity to systematically examine how the electrochemical and structural properties of these Ru2(6+) complexes vary with respect to isomer type and electronic properties of the bridging ligands.     

酪酸梭菌抗阿司匹林致小鼠胃溃 疡作用的初步研究

目的 观测酪酸梭菌是否对阿司匹林导致的胃溃疡具有预防效应,并对其机制进行初步探讨。方法 取30只健康 雄性ICR 小鼠,随机分成3 组,每组各10 只,即模型组、酪酸梭菌组、奥美拉唑组。酪酸梭菌组以6×108cfu/ 只的菌量,模型组和奥美拉唑组均予以相同体积的无菌培养基,灌胃4d 后再饥饿处理48h,然后以250mg/kg 剂量的阿司匹林灌胃造模,奥美拉唑组小鼠于造模前30min,腹腔注射奥美拉唑（13mg/kg）。造模4h 后,取胃组织分别测定SOD、CAT 活力、MDA 含量;进行常规HE 染色观察胃黏膜组织结构变化,PAS染色判断黏液量的变化,免疫组化法测定Bcl-2、Bax 表达水平。结果 模型组的SOD、CAT 活性明显降低,MDA 含量显著增加,而酪酸梭菌预处理后逆转了该趋势（P＜0.01）,与奥美拉唑组比较无统计学差异。HE染色观察,酪酸梭菌能减轻胃黏膜的病理损伤,与奥美拉唑组无统计学差异。PAS 结果提示酪酸梭菌能够增加黏液量。酪酸梭菌组的Bcl-2 表达较模型组显著增多,同时Bax 表达显著减少。结论 酪酸梭菌预处理通过抗氧化应激、增加胃黏液量、上调Bcl-2/Bax 表达比例,减轻阿司匹 林造成的胃溃疡损伤。     

超导离子源铌三锡六极线圈镜像磁场约束结构的优化设计

中国科学院近代物理研究所正在进行国际首台45 GHz全铌三锡超导离子源FECR(Fourth Electron Cyclotron Resonance)磁体的研制,该离子源磁体线圈由六个铌三锡超导六极线圈和四个铌三锡超导螺线管线圈组成。由于单根超导线绕制异形六极线圈(非标准鞍型)技术难度大,且铌三锡超导性能对应力敏感,为了测试单个铌三锡六极线圈性能能否达到设计指标,基于铝合金壳层结构和Bladder-Key精确预紧技术,设计了镜像磁场约束结构。本工作主要阐述了运用ANSYS参数化设计编程对镜像磁场结构进行优化设计的过程和优化后的镜像磁场结构,确定了室温预应力大小,并给出了线圈经过室温预紧、冷却降温和加电励磁后的最大等效应力。进一步结合实际六极线圈制作公差(±0.1 mm),分析和评估了公差对镜像磁场结构中六极线圈预应力施加的影响。     

基于纤维素的气凝胶材料

纤维素是自然界中储量最为丰富的一种天然高分子。作为继无机气凝胶和合成聚合物气凝胶之后的第三代气凝胶,纤维素基气凝胶材料兼具绿色可再生的纤维素材料和多孔气凝胶材料两者的优点,成为纤维素材料研究与应用中的一个热点。本文梳理了纤维素基气凝胶材料的发展脉络,综述了纤维素基气凝胶材料的研究进展。重点对纤维素基气凝胶的制备方法进行了总结,包括基于含水溶剂和无水溶剂的纤维素直接溶解法及源自植物纤维素和细菌纤维素的纤维素纳米纤维的水相分散法。介绍了纤维素基气凝胶力学性能的提高和功能性开发的最新研究结果。最后对纤维素基气凝胶材料的发展前景和研究方向进行了展望。     

催化裂化干气与苯烷基化催化蒸馏制乙苯反应网络热力学研究

 高温气相反应条件下的催化裂化干气制乙苯过程中，容易生成甲苯和二甲苯等副产物；在该过程中采用催化蒸馏技术，使苯与乙烯在低温条件下进行反应，可大幅度降低产品中二甲苯的含量．通过对催化裂化干气与苯烷基化催化精馏过程中的各反应步骤进行分析与热力学计算，结合反应的实际产物组成，提出了苯与乙烯烷基化的反应网络，探讨了苯与乙烯烷基化反应过程中甲苯和二甲苯的形成机理及影响因素．结果表明，增大苯／乙烯比对提高乙烯平衡转化率及乙苯收率有利；在较低温度下进行烷基化反应，可大大减缓C－C键裂解速度，抑制甲苯和二甲苯生成，提高乙苯产品质量．