Tristimulus colorimetry using a digital still camera and its application to determination of iron and residual chlorine in water samples.

Tristimulus colorimetry using a digital still camera (DSC) as a colorimeter has been developed. A photograph of a sample and standard solutions was taken simultaneously with the DSC, and it was transferred to a PC. On the PC, the colors of the sample and of the standard solutions were analyzed and L* (brightness), a* (red-green component), and b* (yellow-blue component) values were determined with laboratory-made software. A dedicated light-box containing white-color LEDs as light source was made of white acrylic to make constant exposure at each photograph. Various settings of the DSC, such as exposure mode, white balance, and so on, that affect analytical figures, were studied with determination of iron with 1,10-phenanthroline. This method was successfully applied to the determinations of iron in a river water sample and of residual chlorine in tap water samples with N,N-diethylphenylenediamine (DPD).     

Effect of polymer on electron-donating character of polymer donor. II. Formation of charge-transfer complex between polymers containing N-dimethylaniline group and trinitrotoluene

Formation of charge-transfer complexes with trinitrotoluene (TNT) as a common acceptor was studied in detail by using dimethyltoluidine (DMT), poly-N-dimethyl-p-aminostyrene (poly-ASt), and also copolymers of aminostyrene (ASt) and styrene (St) as donors. A smooth bathochromic shift in λ_max was observed with increasing ASt unit content in copolymers. Values of the constant for charge transfer complex formation K_CT were found to increase smoothly with ASt unit content. However, the K_CT value with DMT did not coincide with the value extrapolated from the plot of K_CT value versus ASt unit content to zero ASt unit content, but was found to be much higher than the limiting value, in contradiction to the results obtained with maleic anhydride (MAnh). The entropy of complex formation with DMT was found to be exceptionally small; this small value may be responsible for the high K_CT value with DMT.     

Stentor coeruleus SHOWS POSITIVE PHOTOKINESIS

Abstract— Stentor coeruleus responds to a sudden increase in light intensity with a step-up photophobic response (avoiding reaction), and to collimated light with negative phototaxis. The peaks of the action spectra for the photophobic response and for the phototaxis are in common, 610 nm.
5. coeruleus showed changes in its steady-state swimming velocity induced with varying intensities of light (photokinesis). The cells swam fast in light regions but slowly in dark ones (positive photokinesis); the mean velocity of swimming was about 0.6 mm/s at 100 lx but reached about 1.0 mm/s at 50000 lx. The peak of the action spectrum for this photokinesis was about 680 nm.
The organism is the first protozoan cell reported to show three types of photoresponse: photophobic response, phototaxis and photokinesis.     

Synthesis and property of soluble poly(1,1′-dialkyl-3,3′-ferrocenylenevinylene)s via titanium-induced dicarbonyl-coupling reaction of 1,1′-dialkylferrocene-3,3′-dicarbaldehydes

1,1′-Dialkylferrocene-3,3′-dicarbaldehydes ( 1a–c ) with long alkyl chains such as ethyl, hexyl, and dodecyl groups were prepared in 13–25% yield via three-step reactions. The titanium-induced dicarbonyl-coupling reaction of 1a–c gave poly(1,1′-dialkyl-3,3′-ferrocenylenevi-nylene)s ( 2a–c ) in quantitative yields, which were the molecular weights of 3000–10,000 and highly soluble in chloroform, benzene, and hexane. The electrical conductivity and the third-order nonlinear optical susceptibility for poly(1,1′-dihexyl-3,3′-ferrocenylenevinylene) ( 2b ) were estimated to be 1 × 10^?2 S/cm on doping with iodine and 1–4 × 10^?12 esu at a wavelength of 1–2.4 μm, respectively. © 1995 John Wiley & Sons, Inc.     

Computational examination of the electrophilic reaction on oxidative polymerization of phenyltrimethylsilane with sulfur chloride

Phenyltrimethylsilane possesses a higher HOMO energy (–9.34 eV) than nonsubstituted benzene (>0.41 eV). The π electron of the phenyltrimethylsilane localizes on the benzene ring at the ipso position rather than at the para position. Two center energies calculated by the MNDO-PM3 method indicate that the C? Si bond is facilitated to cleave in comparison with the C? H (para position) one of the benzene ring. Phenyltrimethylsilane and phenyl bis(trimethylsilane) were polymerized with sulfur chloride through the cationic oxidative polymerization. The product is isolated as oligo(p-phenylene sulfide), with a melting point of 150–190°C. An electrophile attacks the carbon atom linked to the Si atom in phenyltrimethylsilane. The new synthetic route of PPS can be established on the basis of the computational calculation.     

小资料

复旦大学创建力学专业的第2年,1959年秋,朱照宣先生应邀来校系统讲授《振动理论》课程,课上提到翻身陀螺(后又介绍了俄文文献),引起学生们极大的兴趣。大家不相信竟有此事,于是动手实践。不久就有人做成功了,确实能翻身。具体做法是:在乒乓球上挖一小孔,就中注入少许蜡烛油,再用短羽毛管粘在小孔处。许多同学纷纷仿效,课间可看到不少翻身陀螺在旋转,在当时属于“尖端科学”的力学专业学生中形成了一股小小的“翻身陀螺热”．(陈守吉供稿)     

MR imaging of multiple hepatic cysts in a patient with polycystic liver disease

We report a case of a 55-year-old woman with polycystic liver disease that we examined with magnetic resonance (MR) imaging, CT and ultrasound. The MR images demonstrated varying intensities in the cyst contents which we believe is due to different degrees and age of hemorrhage. Such variability among the cysts was not seen on the CT or ultrasound images.     

Electrochemical formation of cation-exchanging polypyrrole films within various hydrophilic–hydrophobic domains

The electrochemical polymerization technique has been successfully applied to produce conducting polymer film of controlled ion exchange properties. Polypyrrole films were prepared by electro-oxidative polymerization with doping some alkylsulfonates or Nafion. The ion exchange characteristics across polypyrrole films were examined by means of a novel electrochemical technique, namely, the in situ electrochemical quartz crystal microbalance (EQCM) method. According to EQCM measurements, exchanging ion species was found to be successfully controlled by changing the hydrophilic–hydrophobic balance of the incorporated sulfonated-based dopants. The film's characteristics became anion- to cation-exchanging as the dopants became more hydrophobic in nature. The polypyrrole–Nafion(poly(perfluoroethylene sulfonate)) composite film became to be a complete cation exchanger.     

Grain boundary sliding during ambient-temperature creep in hexagonal close-packed metals

Even at ambient temperature or less, below their 0.2% proof stresses all hexagonal close-packed metals and alloys show creep behaviour because they have dislocation arrays lying on a single slip system with no tangled dislocation inside each grain. In this case, lattice dislocations move without obstacles and pile-up in front of a grain boundary. Then these dislocations must be accommodated at the grain boundary to continue creep deformation. Atomic force microscopy revealed the occurrence of grain boundary sliding (GBS) in the ambient-temperature creep region. Lattice rotation of 5° was observed near grain boundaries by electron backscatter diffraction pattern analyses. Because of an extra low apparent activation energy of 20 kJ/mol, conventional diffusion processes are not activated. To accommodate these piled-up dislocations without diffusion processes, lattice dislocations must be absorbed by grain boundaries through a slip-induced GBS mechanism.