Studies on Interactions of Antibiotics with Serum Albumin by Surface Plasmon Resonance Biosensor

Introduction Humanserumalbumin(HSA)isawell known transportproteinforavarietyofmoleculesandions[1].Thebindingofadrugtoserumalbuminhasimportant pharmacokineticconsequencesbecauseitinfluences distribution,excretionandpharmacologicaleffectsof thedruginthebody…     

结晶高分子非晶区的结构及其动力学行为研究进展

非晶结构对结晶高分子材料结构和最终使用性能有非常重要的影响,但目前对半晶高分子中非晶结构的认识还不太清晰并且有待进一步完善.随着研究手段的发展,结晶高分子中非晶区结构及其动力学行为的研究受到越来越多的关注.本文简要概述了目前对结晶高分子中非晶相的研究进展,主要从结晶高分子中非晶区的结构﹑结晶高分子中非晶区的松弛行为﹑非晶相对结晶高分子性能的影响以及等温结晶过程中非晶相的结构演化这四个方面进行介绍,并对它们的研究现状进行了概述,同时指出了目前在这方面研究中存在的争议和问题.     

Pressure Effects on Thermodynamics of Phase Behavior in Polystyrene/Methylcyclohexane Solutions

The calculations presented in this paper are based on the Sanchez-Lacombe(SL)lattice fluid theory.The interaction energy parameter,g12/k,required in this approach was obtained by fitting the cloud points of polystyrene(PS)/methylcyclohexane(MCH)polymer solutions under pressure.The SL lattice fluid theory was used to calculate the spinodals,the binodals,and the Flory-Huggins(FH)interaction parameter of the solutions.The calculated results show that the SL lattice fluid theory can describe the dependences of thermodynamics of PS/MCH solutions on temperature and pressure very well.However,the calculated enthalpy and the excess volume changes indicate that the Clausius-Clapeyron equation cannot be suitable to describe pressure effect on PS/MCH solutions.Further analysis on the thermodynamics of this system under pressure shows that the role of entropy is more important than the excess volume in the present case.     

固相萃取液相色谱-质谱/质谱联用测定河水中大环内酯类抗生素

应用固相萃取（SPE）及LC—MS／MS技术,建立了水中痕量大环内酯类抗生素即红霉素、脱水红霉素、罗红霉素的分析方法,优化了固相萃取、液相色谱-质谱／质谱等相关条件。水样经HLB固相萃取柱富集净化,以多反应检测方式（MRM）对待测物进行定性和定量分析。3种抗生素在10-2000ng／L范围内具有良好的线性。其定量下限为5ng／L（S／N〉10）。加标纯水和实际水样的回收率在71％-111％之间,相对标准偏差（RSD）在3．7％-8．6％之间。该方法灵敏度高、选择性好、准确度高,适合实际水样中痕量大环内酯类药物的检测。使用该方法测得珠江广州河段某水样中红霉素、脱水红霉素和罗红霉素质量浓度分别为164、291和134ng／L。     

同余式2n-2≡1（mod n）的一些新解

1991年,Sinisalo求出了同余式2n-2≡1（mod n）在区间[3,1011]上的所有解,共有88个,其中满足n≡9（mod 10）的解有6个.本文证明了,当n〈3.462＊1014时,同余式2n-2≡1（mod n）不存在有平方因子的解.利用一种新方法,借助计算机的Maple软件,得到了该同余式的9个含有平方因子的解.利用该方法,也可得到该同余式的许多大于1011的新解.     

关于广义正定矩阵的进一步推广

受到Johnson、佟文廷、夏长富的启发,进一步推广了广义正定矩阵的定义,并得出了更广义正定矩阵P∈PA+的若干性质.     

An upper bound solution for the force of combined backward-torward extrusion

A rigid-triangle velocity field for combined backward-forward extrusion based on the experiments and the slip-line field is proposed in this paper. The flow separation point in the rigid-triangle velocity field is defined in accordance with the slip-line theory. A formula of minimum upper bound solution for the punch pressure of the combined extrusion is derived. The values from this formula are compared with those from the slip-line solution and with experimental results. The formula of upper bound solution can be used in practice.     

IN SITU OBSERVATION OF MELTING AND CRYSTALLIZATION BEHAVIORS OF POLY(ε-CAPROLACTONE) ULTRA-THIN FILMS BY AFM TECHNIQUE

The melting and crystallization behaviors of poly(ε-caprolactone) (PCL) ultra-thin films with thickness from 15 nm to 8 nm were studied by AFM technique equipped with a hot-stage in real-time. It was found that melting can erase the spherulitic structure for polymer film with high thickness. However, annealing above the melting point can not completely erase the tree-like structure for the thinner polymer film. Generally, the structure formation of thin polymer films of PCL is controlled not only by melting and crystallization but also by dewetting during thermal annealing procedures, and dewetting predominates in the structure formation of ultra-thin films. However, the presence of tree-like morphology at 75 °C may be due to the strong interaction between PCL and mica surface, which may stick the PCL chains onto the mica surface during thermal annealing process. Moreover, the growth of the dendrites was investigated and it was found that crystallization is followed from a dewetted sample, and the branches did not grow with the stems. The crystallization of polymer in the ultra-thin films is a diffusion-controlled process. Both melting and crystallization behaviors of PCL in thin films are influenced by film thickness.     

TOUGHENING OF POLYCARBONATE WITH PBA-PMMA CORE-SHELL PARTICLES

The miscibility, mechanical properties, morphology and toughening mechanism of PC/PBA-PMMA blends were investigated. The dynamic mechanical results show that PC/PBA-PMMA blend has good miscibility and strong interfacial adhesion. The Izod impact strength of blend PC/PBA-PMMA with 4% (volume fraction) PBA-PMMA core-shell modifier is 16 times higher than that of pure PC. The core-shell volume fraction and thickness of the PMMA shell have effect on the toughness of PC/PBA-PMMA blends. As PMMA volume fraction increases, the toughness of PC/PBA-PMMA blend increases, and reaches a maximum value at 30% volume fraction of PMMA or so. The tensile properties of PC/PBA-PMMA blend with a minimum amount of PBA-PMMA modifier show that brittle-tough transition has no significant variance in comparison with that of pure PC. The scanning electron microscopic (SEM) observation indicates that the toughening mechanism of the blend with the pseudo-ductile matrix modified by small core-shell latex polymer particles is the synergetic effect of cavitation and shear yielding of the matrix.