Improvement of the Pd/Al2O3 Catalyst by the Control of the Sol-Gel Preparative Parameters

In this work, the metal dispersion of the Pd/Al₂O₃ catalyst prepared by sol-gel method is improved by an adequate optimisation of the preparative variables. First, the gelation temperature and the ageing time are selected, in order to avoid the reduction of the metal precursor (palladium acetylacetonate, Pd(acac)₂) by the solvent (sec-butanol, sB). The metal sintering effect on the catalysts treated in oxygen at 500°C is then minimized when the alumina pore size is controlled by the variation of the alumium alkoxide (AsB) concentration and the acetic acid amount ([AcA]/[AsB]). The appearance of new palladium particles on the alumina surface and the matching between the particle diameters and the pore sizes were also effective for the metallic surface area improvement on the samples treated in oxygen at 800°C. Compared to the reference catalysts, the higher metal dispersion obtained on the sol-gel ones was the determinant factor for their higher catalytic activity in methane combustion.     

Elaboration of sponge-like biodegradable cationic particles via double-emulsion solvent evaporation

Researchers work on different optimization methods to come up with preparation methods, which show the desired or targeted outcomes. Moreover, nowadays, research is more focused on developing formulations which contain biodegradable polymers. The objective of the present systematic study was to achieve the abovementioned goals by using a cationic ammonio methacrylate copolymer (Eudragit® RS100). A Double-emulsion solvent evaporation technique was used. This methodology was chosen because the particles formed by this method allow encapsulation of both hydrophilic and hydrophobic active molecules. It also has applications in diverse fields such as drug delivery, food, cosmetics, and pharmaceutical industries.

The aim of this research work was to investigate the influence of various process control parameters, such as stabilizer chemical nature and amount, ultra Turrax® stirring speed and time, the morphology, size, and size distribution of the final dispersions. Then, the prepared particles were characterized using a Scanning Electron Microscope (SEM) and a Laser Diffraction Particle Size Analyzer. This study helped us to know which parameters have a drastic effect on the colloidal properties of the particles.     

Mechanism of nanocapsules formation by the emulsion-diffusion process

A detailed investigation into the mechanisms of nanocapsule formation by means of the two stages "emulsion-diffusion" process is reported. Such widely used process is still poorly understood. An emulsion of oil, polymer and ethyl acetate is fabricated as a first step; dilution with pure water allows ethyl acetate to diffuse out from the droplets, leaving a suspension of nanocapsules at the end. It has been shown that the size of nanocapsules was related to the chemical composition of the organic phase and the size of primary emulsion through a simple geometrical relationship. As a consequence, most of the properties of the nanocapsules were decided at the emulsification step. The influence of several formulation and processing parameters of the primary emulsion was studied accordingly. The thin polymer membrane of nanocapsules was observed by means of cryo-fracture electron microscopy. Finally two experiments were designed for a mechanistic investigation of the diffusion step. A step-by-step diffusion of the organic solvent takes place by successive partition equilibria of ethyl acetate between the droplets and aqueous phase. A time-resolved experiment shows the fast diffusion (less than 20 ms) related to the small droplet size of the emulsion.     

Inclusion complexes of a nucleotide analogue with hydroxypropyl-beta-cyclodextrin

Bis(tbutyl-S-acyl-2-thioethyl)-AraCMP (UA911) is a mononucleotide prodrug developed to overcome some of the cellular resistance to cytotoxic deoxynucleosides analogues. Its use for in vivo studies is limited due to its poor solubility in water. Thus, 2-hydroxypropyl-beta-cyclodextrin (HP-β-CD) was proposed to solubilize UA911 in water, in order to obtain concentrations needed for in vivo experiments. A molar ratio of HP-β-CD: UA911 of 3:1 was sufficient to obtain complete solubilization of the prodrug. The corresponding inclusion complex was characterized by differential scanning calorimetry and ¹H NMR spectroscopy study provided a definitive proof of the formation of the inclusion complex. The complex retained its cytotoxic activity as shown by in vitro cell survival assays on murine leukemia cells, and was evaluated in vivo. HP-β-CD is therefore suitable for the preparation of adequate solutions for the study of the antitumoral activity of nucleotide prodrugs such as UA911.     

Preparation of Alumina Supported Palladium Catalysts by Sol-Gel Method

The chemical reactivity of the aluminium-sec-butoxide (ASB) and the palladium acetylacetonate Pd(acac)₂, used as precursors for the preparation of the alumina supported palladium catalysts by sol-gel method was investigated by the spectroscopic study of the precursor mixture during ageing, using FTIR, UV-VIS and ²⁷Al NMR. The obtaind results showed that acetylacetonate ligands were linked to aluminum when the mixture was aged at 40°C. This was proved by the bands observed at 1530 and 1600 cm^–1 in the FTIR spectra, the band obtained at 289 nm in the UV-VIS spectra and the ²⁷Al NMR sharp peak at 3 ppm. Furthermore, in order to avoid the Pd(acac)₂ reduction to metallic palladium by the SB occurring when the mixture is aged for 3 h, an optimum ageing time should be selected. The precursors modification and the preservation of the palladium oxidation state during ageing could be the required conditions to create a bond between palladium and aluminium during the gelation step. This should be the reason of the thermal stability improvement of the alumina supported palladium catalyst prepared by the sol-gel method.     

Preparation, characterization and surface study of poly-epsilon caprolactone magnetic microparticles

Magnetic microparticles (MMP) have shown to be applied in increasing applications in various fields of biotechnology and medicine. One of their most promising utilization is the magnetic resonance imaging (MRI) in which superparamagnetic substances as magnetite are used in a nanometric size (less than 30 nm) and encapsulated within locally injected biodegradable microparticles. In this paper, magnetite has been encapsulated in polymer-based microparticles. The MMP have been prepared by an emulsion evaporation method. The different parameters influencing the particles size were investigated. The size was found to decrease as the stirring speed or the stabilizer amount (to certain limit) increases. The encapsulation efficacy was more than 90% yielding a magnetite loading of up to 30%, w/w. The X-ray photoelectron spectroscopy (XPS) showed less than 2% of iron atoms at the microparticles surface. The zeta potential response of MMP towards pH variation was very similar to that of magnetite-free microparticles confirming the encapsulation of magnetite within the microparticles. X-ray diffraction assays showed that magnetite crystalline structure was conserved after emulsification and MMP formation. Vibration simple magnetometer (VSM) showed a superparamagnetic profile of the MMP with a magnetic saturation increasing with the increased magnetite amount in the microparticles. These magnetic microparticles can enable clinicians to control microparticles distribution after a local administration in tumors by MRI. They can also be administered to target a defined tumor area by focusing a magnetic field on the surfaces covering the cancerous tissue.     

Influence of process and formulation parameters on the formation of submicron particles by solvent displacement and emulsification-diffusion methods critical comparison

Solvent displacement and emulsification–diffusion are the methods used most often for preparing biodegradable submicron particles. The major difference between them is the procedure, which results from the total or partial water miscibility of the organic solvents used. This review is devoted to a critical and a comparative analysis based on the mechanistic aspects of particle formation and reported data on the influence of operating conditions, polymers, stabilizing agents and solvents on the size and zeta-potential of particles. In addition, a systematic study was carried out experimentally in order to obtain experimental data not previously reported and compare the data pertaining to the different methods. Thus the discussion of the behaviors reported in the light of the results obtained from the literature takes into account a wide range of theoretical and practical information. This leads to discussion on the formation mechanism of the particles and provides criteria for selecting the adequate method and raw materials for satisfying specific objectives in submicron particle design.     

Highly temperature responsive core-shell magnetic particles: synthesis, characterization and colloidal properties

Three new dimeric cholesterol-based compounds of A(LS)(2) type, where A stands for aromatic component, S steroid moiety, and L a linker connecting the two units, have been designed and prepared. Gelation test in 30 solvents demonstrated that the compounds can gel some of the solvents and form 37 gels, of which 16 form spontaneously at room temperature (~25 °C). These gels possess smart thixotropic properties as revealed by rheological studies. FTIR and (1)H NMR measurements revealed that hydrogen bonding is an important driving force for the formation of the gel networks. XRD analysis demonstrated that unlike commonly found layered structures adopted by dimeric cholesterol-based low-molecular mass gelators (LMMGs), one of the gelators created in this study adopts a hexagonal packing structure in its benzene gel.     

Effect of the alkoxides addition order on the properties of Pd/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–ZrO<Subscript>2</Subscript> catalysts used for methane combustion

A series of Pd/Al₂O₃–ZrO₂ catalysts were prepared to be used in methane oxidation. The effect of the addition order of metal alkoxides on the texture, structure and catalytic properties of the solids is studied. The control of the preparation parameters is achieved via sol gel way as an attractive route of the preparation of these catalysts. N₂ physisorption, XRD, Scanning Electronic Microscopy (SEM) and H₂ chemisorption are the main techniques used to characterize the prepared Pd/Al₂O₃–ZrO₂ catalysts. Textural analysis reveals the mesoporosity of all the catalysts independently of the addition order of alkoxides while surface area is more pronounced when the aluminium alkoxide is added before or with the zirconium precursor. XRD patterns show the development of the zirconia tetragonal phase for all the catalysts. Better metallic dispersion is obtained when aluminium alkoxide is added first which can be justified by the high homogeneity observed on the corresponding catalyst as revealed by SEM technique.