Water-induced formation of an alkali-ion dimer in cryptomelane nanorods

Tunneled metal oxides such as α-Mn₈O₁₆ (hollandite) have proven to be compelling candidates for charge-storage materials in high-density batteries. In particular, the tunnels can support one-dimensional chains of K⁺ ions (which act as structure-stabilizing dopants) and H₂O molecules, as these chains are favored by strong H-bonds and electrostatic interactions. In this work, we examine the role of water molecules in enhancing the stability of K⁺-doped α-Mn₈O₁₆ (cryptomelane). The combined experimental and theoretical analyses show that for high enough concentrations of water and tunnel-ions, H₂O displaces K⁺ ions from their natural binding sites. This displacement becomes energetically favorable due to the formation of K²⁺ dimers, thereby modifying the stoichiometric charge of the system. These findings have potentially significant technological implications for the consideration of cryptomelane as a Li⁺/Na⁺ battery electrode. Our work establishes the functional role of water in altering the energetics and structural properties of cryptomelane, an observation that has frequently been overlooked in previous studies.

Water displaces potassium ions and initiates the formation of a homonuclear dimer ion (K²⁺) in the tunnels of hollandite.     

金刚石窗口冷却Yb3+∶YAG DPSSL设计

针对高功率二极管重复率抽运的V型非稳腔Yb3+∶YAG激光头，提出了利用金刚石窗口冷却和直接水冷相结合的复合冷却设计.在YAG片的抽运面进行直接水冷，同时在激光提取面利用金刚石窗口冷却介质.金刚石优异的导热性能不仅能够有效地冷却激光介质，还能消除横向的温度梯度，解决了高功率激光器冷却和高功率抽运的矛盾.模拟结果表明对掺杂10 at %厚度为1.6 mm的Yb3+∶YAG片在抽运功率密度为20 kW/cm2，重复频率为10 Hz的条件下，要将最高温度控制在可接受的范围内（比如320 K），周围冷却水的对流换热系数约为4000 W/m2K.     

北京自由电子激光最近进展──实现饱和振荡

北京自由电子激光(BFEL)装置于1993年底在10.68μm处实现了饱和振荡.输出激光能量为3mJ,饱和平顶宽度2μs.对应饱和振荡平均功率为210kW(宏脉冲),峰值功率约为20MW,比自发辐射高8个量级,单程小讯号净增益为24%,转换效率为0.45%,与理论预期结果相符.光束质量接近衍射极限.目前装置可工作于9-11μm.     

用光声谱法测量Ⅱ-Ⅵ族化合物粉末材料的吸收谱

本文报道了采用自行设计组装的光声光谱(PAS)测量系统,测定(Zn,Cd)(S,Se)粉末固溶体的带隙与组分的关系;观测ZnS:Mn粉末发光材料的光声谱,确定出Mn~(2+)五个激发态能级的位置;利用光声谱的深度剖面分析,对Cu_xS-ZnS:Mn粉末材料进行分析,获得满意的结果。表明光声谱法对凝聚态物质的研究和监测能提供多方面的信息,是一种极有用的新型光谱测量技术。     

Electrochemical study of bergenin on a poly(4-(2-pyridylazo)-resorcinol) modified glassy carbon electrode and its determination in tablets and urine

A very sensitive electroanalytical method was employed to determine bergenin in phosphate buffer with a pH of 6.0, bergenin was accumulated at a 4-(2-pyridylazo)-resorcinol (PAR) polymer film modified glassy carbon electrode (GCE) surface under the condition of open-circuit. In the following anodic sweep from −0.4 to 0.8 V, bergenin adsorbed at the PAR polymer film modified electrode surface, was oxidized and yielded a sensitive oxidation peak at 0.595 V. Due to its unique structure and extraordinary properties, the PAR polymer film shows higher accumulation efficiency toward bergenin compared with a bare GCE. Hence, the amount of bergenin at the PAR polymer film modified GCE surface increases significantly, and finally the oxidation peak current improves greatly. The experimental conditions, such as supporting electrolyte, pH value, accumulation time and scan rate, were optimized for the measurement of bergenin, and a sensitive electroanalytical method was proposed for bergenin determination. The oxidation peak current varies linearly with the concentration of bergenin over the range of 2.0 × 10⁻⁷ to 1.2 × 10⁻⁵ mol/L, and the detection limit is 2.0 × 10⁻⁸ mol/L after 3 min open-circuit accumulation. The relative standard deviation of the same electrode in 10 successive scans is 1.8% for 1.0 × 10⁻⁶ mol/L bergenin and 2.1% for interelectrodes, indicating excellent reproducibility. This new method was successfully demonstrated with bergenin tablets and diluted urine.     

Super-thin cloaks mediated by spoof surface plasmons

We demonstrated the possibility of designing super-thin electromagnetic cloaks based on spoof surface plasmon (SSP). Using a metamaterial layer, incident waves can be coupled into SSP efficiently at the air/metamaterial interface. Due to the strong surface confinement of SSP, EM waves are squeezed into and propagate in deep sub-wavelength scales. Implementation of an 8.2 GHz cloak less than 1/50 the cloaking diameter was presented using split ring resonator (SRR). Excellent cloaking effect was verified by simulations. Rather than isolating objects from the background, such cloaks can drastically enhance the field intensity around the cloaked object. This is of particular importance in applications such as weak wave detection and near-field sensing.     

Robustly topological mixing of Kan's map

In 1994, I. Kan constructed a smooth map on the annulus admitting two physical measures, whose basins are intermingled. In this paper, we prove that Kan's map is $C^2$ robustly topologically mixing.     

基于TMS320DM6467的数字视频综合实验设计

随着网络视频应用的飞速发展,达芬奇技术作为一种新平台逐渐成为数字视频技术应用的发展方向.针对网络视频传输实时性要求高的特点,本文提出了基于达芬奇技术的数字视频综合实验设计方案,TMS320DM6467平台具有ARM+DSP双核处理器,能够提高系统性能,缩短开发周期;DSP内核视频数据编码算法选用H.264,大大提高了数据编码效率;ARM核负责控制视频采集以及实时传输通信,便于学生对数字视频应用前沿技术进行探索.     

阻尼对空爆荷载等效静载动力系数的影响

为考查阻尼参数对空爆荷载等效静载动力系数的影响,理论推导了空爆荷载下结构等效单自由体系弹塑性位移解及延性比解,设计并计算了阻尼比0.000 1～0.1、延性比1～4的20种典型工况的动力系数,并与现行抗爆设计规范动力系数公式结果进行了对比。结果表明:阻尼比小于0.000 1时可基本代表无阻尼状态,阻尼比0.01的动力系数比无阻尼的最大降低幅度为2.08%,数值差异很小,因此阻尼比为0.01以内时,可忽略阻尼对动力系数的影响;阻尼比0.05的动力系数比无阻尼的降低幅度约9.92%,数值差异较大,认为阻尼比0.05以上时将具有明显的经济效益;现行设计规范动力系数更适用于柔性结构体系,运用于刚性结构抗爆设计时,计算误差较大,对阻尼比较小的结构设计更不利。