IMPROVED PROPERTIES OF METALLOCENE-CATALYZED LINEAR LOW-DENSITY POLYETHYLENE/POLYPROPYLENE BLENDS DURING ULTRASONIC EXTRUSION

Metallocene-catalyzed linear low-density polyethylene/polypropylene （mLLDPE/PP） blends were prepared by ultrasonic extrusion in this work. Their extrusion processing behaviors were estimated by online measured data, such as the die pressure and flow rate. Crystallization and mechanical properties of the blends were also investigated. The results show that the addition of PP improves the processing behaviors of mLLDPE, but has little effect on its mechanical properties. On the other hand, the addition of mLLDPE improves the impact strength of PP, but has little effect on its processing behavior. The processing behaviors and mechanical properties of mLLDPE/PP blends get further improved due to the presence of ultrasonic oscillation during extrusion. Compared with PP-rich blends, the apparent viscosity drop of mLLDPE-rich blends is more sensitive to ultrasonic oscillation. The ultrasonic oscillation affects the crystal nucleation, while barely the other crystalline behaviors of the blends.     

S-甘油醛缩丙酮的合成及其Wittig反应

以L-抗坏血酸为原料合成了S-甘油醛缩丙酮;研究了S-甘油醛缩丙酮的Wittig反应立体选择性.     

Painlev′e Prop erty and Integrability of Polynomial Dynamical Systems

The main purpose of this paper is to investigate the connection between the Painlev′e property and the integrability of polynomial dynamical systems. We show that if a polynomial dynamical system has P...     

拉曼光谱技术在聚合物研究中的应用进展

拉曼光谱可以提供分子的振动信息,对于聚合物分子链的构象和链间的相互作用非常敏感,能够提供聚合物固体、薄膜或溶液的物理化学特性信息,如聚合物的结构单元、空间构型、晶态结构、分子链的物理构象或分子链子链和侧基在界面间或在各向异性材料中的排列等链取向信息等。因此拉曼光谱作为一种原位无损检测技术,其衍生出的表面增强拉曼光谱技术(Surface-enhanced Raman Scattering,SERS)、变温拉曼光谱技术、共焦显微拉曼光谱技术(Confocal Raman Microscopy,CRM)、拉曼Mapping成像技术和共振拉曼散射技术(Resonance Raman scattering,RRS)等,广泛应用于物理、化学和生物医学等领域。本文从拉曼光谱的基本理论基础、拉曼光谱技术及其在聚合物研究中的最新应用进展等方面进行综述,以探索扩展拉曼光谱技术在高分子物理与化学领域中许多问题,如分子链的构象结构、分子链的结晶行为、分子链的扩散运动和共混体系相态结构变化等方面的应用。     

微波水解衍生高效液相色谱法测定饲料中的氨基酸

建立了一种微波水解衍生高效液相色谱同时测定饲料中17种氨基酸含量的方法。采用2,4-二硝基氯苯作为柱前衍生试剂,利用C_(18)色谱柱分离。二极管阵列检测器进行检测,检测波长为360 nm,并对微波水解时间及温度进行优化。17种氨基酸在2.5~50 mg/L范围内呈良好线性关系,相关系数为0.990 7~0.999 9;相对标准偏差为0.88%~4.2%;加标回收率为90.6%~107.2%;检出限为0.15~2.37 mg/L。研究结果表明,150℃下微波水解16 min的结果与传统加热水解(110℃,24 h)的效果基本相同。该方法分析时间较短,灵敏度较高,可用于饲料中氨基酸含量的检测。     

具有高散射能力的聚碳酸酯复合材料的制备与性能研究

以双酚A型聚碳酸酯(PC)为基体、苯乙烯-丙烯腈共聚物(SAN)为散射体,通过熔融共混方法制备了同时具备高透光率和高雾度的高散射聚碳酸酯光散射片,研究了SAN含量对光散射片微观结构和光散射性能的影响,发现透光率和雾度同时随着散射体含量增加而提高的现象.研究结果表明,当SAN含量低于30%时,分散相为球形颗粒,颗粒的平均粒径随着SAN含量的增加而增加,而颗粒的数量浓度则随之减小,这使得其透光率和雾度均随着SAN含量的增加而增加,当SAN含量为30%时,透光率和雾度达到最大值,分别为89.1%和91.7%.并结合Mie散射理论解释说明了透光率和雾度同时随着散射体含量的增加而提高的现象.但当SAN含量的进一步增加,分散相颗粒尺寸已远大于光波的波长,不再适用于Mie散射理论,且部分不再呈球形颗粒,使得PC片的透光率和雾度略有降低.     

激磁电感对直线变压器输出波形顶降的影响

 从理论上分析了激磁电感对直线变压器驱动源输出脉冲波形顶降的影响,使用Pspice软件对理论计算结果进行了模拟验证。理论计算和模拟分析的结果均表明：激磁电感越小,输出脉冲波形的顶降越明显。设计了50 A的偏磁电路并进行了实验,在重复频率为20 Hz时直线变压器驱动源工作稳定,输出脉冲波形前沿约35 ns,平顶约130 ns,幅值约125 kV。与未加偏磁电路的实验结果相比,顶降明显减小（小于5%）,实验结果与理论计算和模拟分析结果基本一致。     

五乙烯六胺改性金属有机骨架材料MIL-101(Cr)对CO_2的吸附性能

采用溶剂热法合成金属有机骨架材料MIL-101(Cr),用回流法将五乙烯六胺(PEHA)负载到MIL-101(Cr)孔道中的不饱和金属位点上,使用扫描电镜、粉末X射线衍射、氮气物理吸附、元素分析和傅里叶变换红外光谱等表征手段考察材料的结构和形貌,测试氨基改性前后的MIL-101(Cr)在25℃、不同压力下对CO_2的吸附效果。结果表明,负载0.24 m L五乙烯六胺后的MIL-101(Cr)对CO_2的吸附效果最好,在25℃、常压下对CO_2的饱和吸附量可达58.944 mg/g,相比未负载五乙烯六胺的MIL-101(Cr)吸附量(CO_2饱和吸附量为44.208 mg/g)增加了33%。随着吸附压力的增加,MIL-101(Cr)和0.24PEHAM IL-101(Cr)对CO_2的饱和吸附量逐渐增加,当吸附压力为1.1 MPa时,两者的吸附量分别为1 147.59和1 256.74 mg/g,表明该类材料在高压下对CO_2有着良好的吸附效果。     

Fabrication of microporous membranes from melt extruded polypropylene precursor films via stretching: Effect of annealing

In this work, the effects of annealing conditions on the microstructure of polypropylene(PP) precursor films and further on the porous structure and permeability of stretched membranes were investigated. Combinations of WAXD, FTIR, DSC and DMA results clearly showed the crystalline orientation and crystallinity of the precursor film increased with annealing temperature, while the molecular chain entanglements in the amorphous phase decreased. Changes in the deformation behavior suggested more lamellar separation occurred for the films annealed at higher temperatures. Surface morphologies of the membranes examined by SEM revealed more pore number and uniform porous structure as the annealing temperature increased. In accordance with the SEM results, the permeability of the membranes increased with annealing temperature. On the other hand, it was found that 10 min was almost enough for the annealing process to obtain the microporous membranes with an optimal permeability.