Formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber blends: Effects of preparation method,composition, and thermal condition

The effects of preparation method, composition, and thermal condition on formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber (iPP/EPR) blends were studied using modulated differential scanning calorimeter (MDSC), wide angle X‐ray diffraction (WAXD), and phase contrast microscopy (PCM). It was found that the α‐iPP and β‐iPP can simultaneity form in the melt‐blended samples, whereas only α‐iPP exists in the solution‐blended samples. The results show that the formation of β‐iPP in the melt‐blended samples is related to the crystallization temperature and the β‐iPP generally diminishes and finally vanishes when the crystallization temperature moves far from 125 °C. The phenomena that the lower critical temperature of β‐iPP in iPP/EPR obviously increases to 114 °C and the upper critical temperature decreases to 134 °C indicate the narrowing of temperature interval, facilitating the formation of β‐iPP in iPP/EPR. Furthermore, it was found that the amount of β‐iPP in melt‐blended iPP/EPR samples is dependent on the composition and the maximum amount of β‐iPP formed when the composition of iPP/EPR blends is 85:15 in weight. The results through examining the effect of annealing for iPP/EPR samples at melt state indicate that this annealing may eliminate the susceptibility to β‐crystallization of iPP. However, only α‐iPP can be observed in solution‐blended samples subjected to annealing for different time. The PCM images demonstrate that an obvious phase‐separation happens in both melt‐blended and solution‐blended iPP/EPR samples, implying that compared with the disperse degree of EPR in iPP, the preparation method plays a dominant role in formation of β‐iPP. It is suggested that the origin of formation of β‐iPP results from the thermomechanical history of the EPR component in iPP/EPR. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1704–1712, 2007     

V-Ag-Ni系氧化物的表面氧性质与甲苯选择性氧化的催化性能

制备了一系列Ｖ，Ａｇ，Ｎｉ原子比不同的三元氧化物，应用ＴＰＤ－ＭＳ技术研究了样品表面氧的性质，并测定了甲苯选择性氧化生成苯甲醛的催化活性。实验结果表明，样品表面存在有多种吸附的氧物种。在脱附温度＜９００℃：当Ｎｉ含量对Ａｇ（或Ｖ）的原子比为０．２５或０．５０时，仅在低温处出现有表面的Ｏ＾－和Ｏ＾２＾－两种氧物种的脱附峰；当Ｎｉ含量对Ａｇ（或Ｖ）的原子比增高到＞０．７５时，除有表面的Ｏ＾－和Ｏ＾２＾     

MTT法测定稀土离子对BEL-7402及K562细胞的毒性及增殖毒性

用MTT法测定稀土离子在不同浓度、不同培养液中,与BEL 7402和K562细胞作用不同时间,对细胞的毒性和增殖毒性。结果表明,在含10%小牛血清培养液中,仅个别稀土离子在较高浓度时对BEL 7402细胞增殖有较弱的抑制作用;对于K562细胞,稀土离子在低浓度时对细胞增殖即表现出较强的抑制作用(P<0.05)。当培养液不含小牛血清时,较低浓度的稀土离子即可抑制BEL 7402细胞的增殖(P<0 05)。     

Experimental study of photocatalytic oxidation of formaldehyde and its by-products

Formaldehyde is one of the most harmful pollutants that endanger occupants' health and the way of its effective removal has become a focus in the field of air quality. This paper studies the static photocatalytic removal of formaldehyde experimentally and finds out that carbon monoxide, which is more harmful to occupants' health than the formaldehyde itself, is one of the by-products in the process of photocatalytic oxidation of formaldehyde. The increase of carbon monoxide concentration should be taken into consideration in the photocatalytic application. The photocatalyst surface at room temperature can weakly adsorb CO and CO₂, which can deactivate the photocatalysts.     

套索冠醚毛细管色谱柱的研制

用套索冠醚N,N′-双(2-甲基吡啶)-二氮杂-18-冠-6作为固定相,涂渍在弹性石英毛细管内,测其柱效、惰性、热稳定性、平均极性及选择性等性质.其结构由元素分析、红外光谱、核磁共振及质谱分析的试验数据所证实.试验表明,它具有良好的色谱性能、中等极性,适用于对醇、卤代烃、芳香烃等各类异构体的分离,并用分子结构观点探讨了保留机理.     

稀土离子对大鼠肝细胞核脂质过氧化的影响

用光度法测定丙二醛 (MDA)研究不同浓度La3 +,Ce3 +,Pr3 +,Nd3 +,Eu3 +对大鼠肝细胞核脂质过氧化的影响。结果表明 :稀土离子在 1×10 - 4 ～ 1× 10 - 6mol·L- 1 浓度范围内能抑制振荡温育或H2 O2 引起的脂质过氧化 ,且与浓度正相关。但是对大鼠肝细胞核用稀土离子处理一定时间 ,稀土离子Eu3 +对脂质过氧化的抑制作用明显减弱 ,甚至会导致脂质过氧化加强     

室温以上磁制冷材料La(Fe1-xCox)11.7Al1.3化合物的研究

通过X射线衍射分析和超导量子干涉磁强计（SQUID）磁性测量,研究了Co替代Fe含量对居里温度在室温以上的磁制冷材料La（Fe1-xCox）11.7Al1.3（x=0.072,0.081）磁结构和磁性能的影响。La（Fe1-xCox）11.7Al1.3材料的居里温度随Co的含量增加而增加,La（Fe0.919Co0.081）11.7Al1.3的居里温度为311 K。当外场变化为1.9 T时磁熵变达到3.6 J·kg^-1·K^-1,RCP值为168.6 J·kg^-1,虽然它的磁熵变小于具有巨磁熵变的磁制冷材料,但是它在磁场为1.9 T时的制冷能力与这些材料相当。     

Preparation and evaluation of uniform-sized molecularly imprinted polymer beads used for the separation of sulfamethazine

Uniform-sized molecularly imprinted polymer (MIP) beads were prepared using a one-step swelling and polymerization method. The obtained sulfamethazine (SMZ)-imprinted polymer showed high affinity and selectivity toward SMZ and other structurally related sulfonamides in acetonitrile or water-acetonitrile mobile phases, particularly in high aqueous systems. The column performance of the MIPs for SMZ and its analogues could be improved by elevating the column temperature and optimizing the flow rate. The hydrogen-bonding effect plays a significant role in the recognition process of SMZ-imprinted polymer systems in organic media, while the ion-exchange effect, as well as hydrophobic effect, dominates the retention mechanism in aqueous-rich media, in addition to shape recognition.     

稀土元素对人肝癌细胞SMMC-7721增殖的影响

用MTT法研究了14种稀土元素(La，Ce，Pr，Nd，Sm，Eu，Gd，Tb，Dy，Ho，Er，Tm，Yb和Lu)对人肝癌细胞SMMC-7721增殖的影响。他们对肝癌细胞的生长作用可分为3类。其中La^3 、Ce^3 和Eu^3 对肝癌细胞的增殖有剂量依赖性正效应，能够在一定浓度范围内刺激细胞生长；Sm^3 ，Gd^3 ，Ho^3 ，Er^3 ，Yb^3 对肝癌细胞生长的刺激作用没有剂量依赖性特征；而Pr^3 ，Nd^3 ，Tb^3 ，Dy^3 ，Tm^3 和Lu^3 则表现出对肝癌细胞的增殖具有不用程度的抑制。推测14种稀土元素作用方式的不同与他们的原子结构有一定的关系，它们对肝癌细胞的相对增殖率随着原子序数的增加呈现出一定的规律性。     

Electrocatalytic oxidation of formaldehyde and methanol on Ni(OH)2/Ni electrode

A nickel hydroxide-modified nickel electrode (Ni(OH)₂/Ni) was successfully prepared by the cyclic voltammetry (CV) method and the electrocatalytic properties of the electrode for formaldehyde and methanol oxidation have been investigated respectively. The Ni(OH)₂/Ni electrode exhibits high electrocatalytic activity in the reaction. A new method has been developed for formaldehyde determination at the nickel hydroxide-modified nickel electrode and the experimental parameters were optimized. The oxidation peak current is linearly proportional to the concentration of formaldehyde in the range of 7.0 × 10^?5 to 1.6 × 10^?2 M with a detection limit of 2.0 × 10^?5 M. Recoveries of artificial samples are between 93.3 and 103.5%. The effect of scan rate and methanol concentration on the electrochemical behavior of methanol were investigated respectively.