Lot Streaming in a Two-stage Flow Shop with Set-up,Processing and Removal Times Separated

This paper considers the job (lot) scheduling problem for two-stage flow shops in which the movement of transfer batches (sublots) from the first stage to the next are allowed. Set-up, processing and removal times are considered as separable and independent of the order in which jobs are processed at any of two stages. An optimal transfer batch sizing and scheduling algorithm which has an objective of minimizing the maximum flow time (makespan) is developed and demonstrated by a numerical example.     

Synthesis, thermal stability, electronic features, and antimicrobial activity of phenolic azo dyes and their Ni(II) and Cu(II) complexes

Four water soluble azo dyes, 4-(isopropyl)-2-[(E)-(4-chlorophenyl)diazenyl]phenol (L ¹), 4-(isopropyl)-2-[(E)-(2,4-dichlorophenyl)diazenyl]phenol (L²), 4-(sec-butyl)-2-[(E)-(4-chlorophenyl) diazenyl]phenol (L ³), 4-(sec-butyl)-2-[(E)-(2,4-dichlorophenyl)diazenyl]phenol (L ⁴), and their Cu(II) and Ni(II) complexes were synthesized and characterized using spectroscopic methods. Examination of their thermal stability revealed similar decomposition temperature of approximately 260–300°C and that they were more thermally stable than their metal complexes. Ni(II) complexes of ligands L² and L⁴ were more stable than the other coordination compounds. Among the synthesized ligands, L² and the complexes Cu(L³)₂ and Ni(L⁴)₂ showed both antimicrobial and antifungal activity. However, the other ligands and the complexes were poorly active against selected microorganisms.     

The uranium recovery from aqueous solutions using amidoxime modified cellulose derivatives. IV. Recovery of uranium by amidoximated hydroxypropyl methylcellulose

Amidoxime modified hydroxypropyl methylcellulose (HPMC) films (HPMC-g-AO) were used for the recovery of uranium from aqueous solutions by a complexation process. The adsorption experiments were carried out by immersion of a certain amount of films in UO₂ ²⁺ solutions (resultant pH 4.1) ranging in concentration from 100 to 1,000 ppm. The effect of temperature (25–50 °C) on the adsorption capacity of HPMC-g-AO was investigated at the optimized time. The adsorption kinetics and the thermodynamics as well as the adsorption capacity of HPMC-g-AO films were investigated. The adsorption capacity was found as 765 mg UO₂ ²⁺/g dry film. The kinetic and the thermodynamic parameters (i.e. activation energy, enthalpy, entropy and Gibbs free energy) for the interaction of UO₂ ²⁺ with HPMC-g-AO were calculated based on known basic relations. The results showed that adsorption occurred through strong electrostatic interactions with an enthalpy of ?36.5 kJ/mol. The desorption of UO₂ ²⁺ were investigated using different desorption agents such as EDTA, HCl, NaHCO₃, and NaOH. After the 2 weeks treatment period, the highest desorption yield were found as 23 % with NaHCO₃.     

Characterization and in vitro release kinetics of chitosan based biocomposites from Scotch Bonnets

The main aim of this study is to formulate the combination of the bioactive composite containing chitosan/β -tricalcium phosphate (CH/β-TCP) as potential drug delivery platforms for the sustained release of antibiotics. Herein the mode of amoxicillin (AMX) maintained in the β-TCP/chitosan composite was characterized using XRD, FT-IR to confirm the phase purity and functional groups. SEM was used to examine the size and shape of particles. The SEM images of the biocomposites after drug release confirmed that they are biodegradable. In vitro drug release experiments in PBS (pH 7.4) revealed a sustained release profile in a neutral medium. Drug release profiles were evaluated according to five different kinetic models including Zero Order, First Order, Higuchi, Hixon Crowel, and Korsmeyer-Peppas. The release profile was best expressed by the Korsmeyer Peppas model because the results showed high linearity. Overall, the positive effect of chitosan coating on the drug elution profile of β-TCP as carriers for the controlled delivery of antibiotics was regarded as biocompatible for the controlled drug delivery system.     

Natural Melanin Nanoparticle‐decorated Screen‐printed Carbon Electrode: Performance Test for Amperometric Determination of Hexavalent Chromium as Model Trace

A biosensor was prepared with natural melanin nanoparticles (MNP) decorated on a screen‐printed carbon electrode (SPCE). Hexavalent chromium was selected as a well‐known heavy metal ion to be detected for testing the performance of novel biosensor. Natural MNP was extracted from cuttlefish (Sepia officinalis) ink. Surface decoration of SPCEs with MNP was performed by two different methods. The first one was layer‐by‐layer assembly (LBL‐A) for different cycle times(n). In the second one, plasma treatment of SPCE incorporated with evaporation‐induced self‐assembly (EI‐SA) techniques including different incubation times in MNP solutions. The performance of both modified SPCEs were tested for amperometric detection of Cr(VI) in various water samples, and peak reduction of Cr(VI) was determined at 0.33 V. Amperometric results showed wide linear ranges of 0.1–2 μM and 0.1–5 μM of Cr(VI) for SPCEs modified with 14n‐LBL‐A and 12h‐EI‐SA, respectively. The sensitivities of SPCEs modified with 14n‐LBL‐A and 12h‐EI‐SA techniques were 0.27 μA μM^?1 and 0.52 μA μM^?1, respectively. In addition, both modified SPCEs selectively detected Cr(VI) in a model aqueous system composed of certain other heavy metals and minerals, and tap and lake water samples. The LOD and LOQ values for 12h‐EI‐SA were 0.03 μM and 0.1 μM, respectively. This showed that MNP‐modified‐SPCEs generated via EI‐SA techniques have the potential to be an alternative to conventional detection methods such as ICP‐MS.     

Synthesis,structural, spectral,thermal and comparative biological activity studies of [V<Subscript>2</Subscript>O<Subscript>2</Subscript>(SO<Subscript>4</Subscript>)<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)<Subscript>6</Subscript>]

The hydrothermal reaction of a mixture of V₂O₅, VCl₃, 2,5-pyridinedicarboxylic acid and diluted H₂SO₄ for 68 h at 180°C gives a blue colored solution which yields prismatic blue crystals of IV ₂ ^IV O₂(SO₄)₂(H₂O)₆] (1) in 32% yield (based on V). Complex 1 was investigated by means of elemental analysis (C, H and S), TGA, FT-IR, manganometric titration, Single Crystal X-ray Diffraction Methods and also comparative antimicrobial activities. Crystal data for the compound: monoclinic space group P2₁/c and unit cell parameters are a = 7.3850(12) Å, b = 7.3990(7) Å, c = 12.229(2) Å, β = 108.976(12)° and Z = 2. Although structure of 1 as a natural mineral has been previously determined, this work covers new preparation method and full characterization of 1 along with comparison of antibacterial activity between 1 and the commercial vanadium(IV) oxide sulfate hydrate compounds, VOSO₄ · xH₂O (Riedel-de Haën and Alfa Aesar brand names). 1 was evaluated for the antimicrobial activity against gram-positive, gram-negative bacteria, yeasts and mould compared with the commercial VOSO₄ · xH₂O compounds. 1 showed weak activity against bacteria Bacillus cereus, Nocardia asteroides and yeast Candida albicans. A good antimicrobial activity was recorded against Cirtobacter freundii (15 mm). There are only a few reproducible well-defined vanadium(IV) starting materials to use for exploring the synthesis of new materials. VCl₄, VO(acac)₂, VOSO₄ · xH₂O and [V(IV)OSO₄(H₂O)₄] · SO₄ · [H₂N(C₂H₄)₂NH₂] are common starting materials for such applications. In addition to these compounds, 1 can be used as an oxovanadium precursor.     

A fluorescent chemical sensor for ethanol determination in alcoholic beverages

A sensor for ethanol is described that is based on the fluorescent probe 5,10,15,20-tetraphenyl porphyrin (TPP). Response is based on the quenching of the fluorescence of TPP by ethanol as a result of electrostatic attraction. The sensor linearly responds to ethanol in the concentration range from 1 to 75 vol.% and was applied to the determination of ethanol in various kinds of wines and whisky.     

Separation and preconcentration of Pb(II) using ionic liquid-modified silica and its determination by flame atomic absorption spectrometry

A new method based on microcolumn packed with ionic liquid-modified silica combined with flame atomic absorption spectrometry has been developed for the determination of lead in environmental samples. Several factors influencing the preconcentration efficiency of lead and its subsequent determination, such as pH of the sample, flow rate, mass of ionic liquid, and interfering effect, have been investigated. Lead could be quantitatively retained by ionic liquid-modified silica in the pH range of 5-7, and then eluted completely with 3.0 mL 1.0 mol L⁻¹ HCl. The detection limit of this method for lead was 0.7 μg L⁻¹ with preconcentration factor of 185, and the relative standard deviation (RSD) was 4.2% at 0.1 μg mL⁻¹ Pb(II). This method has been applied for the determination of trace amount of lead in NIST standard reference material 2709 (San Joaquin Soil) and river water samples with satisfactory results.     

über Metallkomplexe der Heteroarylformazane

Two new heteroarylformazans with two complex forming carboxy groups in the ortho position relative to the formazan chain have been synthesized. These compounds form complexes with uranyl, cobalt and nickel ions. The ratio metal/formazan of these complexes has been investigated.     

Oscillatory and Periodic Solutions of Impulsive Differential Equations with Piecewise Constant Argument

We study the existence of oscillatory and periodic solutions of a class of first order scalar impulsive delay differential equations with piecewise constant argument.