A soluble and multichromic conducting polythiophene derivative

A new soluble polythiophene derivative was synthesized by both chemical and electrochemical oxidative polymerization of 1-4-nitrophenyl-2,5-di(2-thienyl)-1H-pyrrole (SNSNO₂). Chemical method produces a polymer which is completely soluble in organic solvents. The structures of both the monomer and the soluble polymer were elucidated by ¹H and ¹³C-NMR and FTIR. The average molecular weight has been determined by GPC to be Mn = 6.3 × 10³ for the chemically synthesized polymer. P(SNSNO₂) was also synthesized via potentiostatic electrochemical polymerization. Characterizations of the resulting polymer were performed by cyclic voltammetry CV, FTIR and UV-Vis spectroscopy. Four-probe technique was used to measure the conductivities of the samples. Moreover, the spectroelectrochemical and electrochromic properties of the polymer film were investigated. In addition, dual type polymer electrochromic devices ECDs based on P(SNSNO₂) with poly3,4-ethylenedioxythiophene (PEDOT) were constructed. Spectroelectrochemistry, electrochromic switching and open circuit stability of the devices were studied. They were found to have good switching times, reasonable contrasts and optical memories.     

Nitro Derivatives of Parabanic Acid as Potential Explosives: A Theoretical Study

This work deals with certain parabanic acid (PA) derivatives because they possess great calculated density (>1.8 g · cm^–3) and high content of nitrogen (26 %). Computed ballistic properties of eight different parabanic acid derivatives are presented. The structures were optimized at the B3LYP/6‐31G(d, p) level. The calculated data for PA are found to be compatible with the experimental X‐ray data. The detonation performance analyses were done using empirical Kamlet‐Jacobs equations. Additionally, detonation products were assigned and power index were calculated. All the compounds considered are powerful candidates for high energy materials.     

Efficient algorithms for robust and stable principal component pursuit problems

The problem of recovering a low-rank matrix from a set of observations corrupted with gross sparse error is known as the robust principal component analysis (RPCA) and has many applications in computer vision, image processing and web data ranking. It has been shown that under certain conditions, the solution to the NP-hard RPCA problem can be obtained by solving a convex optimization problem, namely the robust principal component pursuit (RPCP). Moreover, if the observed data matrix has also been corrupted by a dense noise matrix in addition to gross sparse error, then the stable principal component pursuit (SPCP) problem is solved to recover the low-rank matrix. In this paper, we develop efficient algorithms with provable iteration complexity bounds for solving RPCP and SPCP. Numerical results on problems with millions of variables and constraints such as foreground extraction from surveillance video, shadow and specularity removal from face images and video denoising from heavily corrupted data show that our algorithms are competitive to current state-of-the-art solvers for RPCP and SPCP in terms of accuracy and speed.     

Time-Dependent Shape Factors for Uniform and Non-Uniform Pressure Boundary Conditions

Matrix–fracture transfer functions are the backbone of any dual-porosity or dual-permeability formulation. The chief feature within them is the accurate definition of shape factors. To date, there is no completely accepted formulation of a matrix–fracture transfer function. Many formulations of shape factors for instantly-filled fractures with uniform pressure distribution have been presented and used; however, they differ by up to five times in magnitude. Based on a recently presented transfer function, time-dependent shape factors for water imbibing from fracture to matrix under pressure driven flow are proposed. Also new matrix–fracture transfer pressure-based shape factors for instantly-filled fractures with non-uniform pressure distribution are presented in this article. These are the boundary conditions for a case for porous media with clusters of parallel and disconnected fractures, for instance. These new pressure-based shape factors were obtained by solving the pressure diffusivity equation for a single phase using non-uniform boundary conditions. This leads to time-dependent shape factors because of the transient part of the solution for pressure. However, approximating the solution with an exponential function, one obtains constant shape factors that can be easily implemented in current dual-porosity reservoir simulators. The approximate shape factors provide good results for systems where the transient behavior of pressure is short (a case commonly encountered in fractured reservoirs).     

Bioactive Abietane-Type Diterpenoid Glycosides from Leaves of Clerodendrum infortunatum (Lamiaceae)

In this study, two previously undescribed diterpenoids, (5R,10S,16R)-11,16,19-trihydroxy-12-O-β-d-glucopyranosyl-(1→2)-β-d-glucopyranosyl-17(15→16),18(4→3)-diabeo-3,8,11,13-abietatetraene-7-one (1) and (5R,10S,16R)-11,16-dihydroxy-12-O-β-d-glucopyranosyl-(1→2)-β-d-glucopyranosyl-17(15→16),18(4→3)-diabeo-4-carboxy-3,8,11,13-abietatetraene-7-one (2), and one known compound, the C₁₃-nor-isoprenoid glycoside byzantionoside B (3), were isolated from the leaves of Clerodendrum infortunatum L. (Lamiaceae). Structures were established based on spectroscopic and spectrometric data and by comparison with literature data. The three terpenoids, along with five phenylpropanoids: 6′-O-caffeoyl-12-glucopyranosyloxyjasmonic acid (4), jionoside C (5), jionoside D (6), brachynoside (7), and incanoside C (8), previously isolated from the same source, were tested for their in vitro antidiabetic (α-amylase and α-glucosidase), anticancer (Hs578T and MDA-MB-231), and anticholinesterase activities. In an in vitro test against carbohydrate digestion enzymes, compound 6 showed the most potent effect against mammalian α-amylase (IC₅₀ 3.4 ± 0.2 μM) compared to the reference standard acarbose (IC₅₀ 5.9 ± 0.1 μM). As yeast α-glucosidase inhibitors, compounds 1, 2, 5, and 6 displayed moderate inhibitory activities, ranging from 24.6 to 96.0 μM, compared to acarbose (IC₅₀ 665 ± 42 μM). All of the tested compounds demonstrated negligible anticholinesterase effects. In an anticancer test, compounds 3 and 5 exhibited moderate antiproliferative properties with IC₅₀ of 94.7 ± 1.3 and 85.3 ± 2.4 μM, respectively, against Hs578T cell, while the rest of the compounds did not show significant activity (IC₅₀ > 100 μM).     

Naked Eye Detection of Carbonate,Hydroxide, and Cyanide Ions with 1,4′‐Diazaflavonium Bromides: A Simple Spectrophotometric Method for Cyanide Determination

Anion sensor properties of N‐alkyl‐substituted 1,4′‐diazaflavonium bromides in methanol–water were evaluated by UV–vis spectrometry. Pronounced changes were observed in the absorption spectra of all compounds for only OH^?, CO₃^2?, and CN^? among F^?, Cl^?, Br^?, I^?, OH^?, CO₃^2?, NO₃^?, PO₄^3?, CN^?, SO₄^2?, HSO₄^?, HCO₃^?, SCN^?, NO₂^?, and P₂O₇^2? ions. Two new absorption bands at 385 and 685 nm accompanying the distinct color change for OH^?, CO₃^2?, and CN^? ions were observed in case of all compounds. The color changes were from pink to blue for CO₃^2? and OH^? ions and from pink to purple for CN^? ion. Thanks to the distinct color change, the compounds can be used as selective colorimetric anion sensors. Linear changes of absorbance of N‐heptyl‐substituted compound at 385 nm as a function of the ion concentration were used to determine CN^? ion in water samples. Detection and quantification limits of the proposed method were 0.94 and 2.82 mg/L, respectively.     

CO2 Injection into Saline Carbonate Aquifer Formations II: Comparison of Numerical Simulations to Experiments

Sequestration of carbon dioxide in geological formations is an alternative way of managing extra carbon. Although there are a number of mathematical modeling studies related to this subject, experimental studies are limited and most studies focus on injection into sandstone reservoirs as opposed to carbonate ones. This study describes a fully coupled geochemical compositional equation-of-state compositional simulator (STARS) for the simulation of CO₂ storage in saline aquifers. STARS models physical phenomena including (1) thermodynamics of sub- and supercritical CO₂, and PVT properties of mixtures of CO₂ with other fluids, including (saline) water; (2) fluid mechanics of single and multiphase flow when CO₂ is injected into aquifers; (3) coupled hydrochemical effects due to interactions between CO₂, reservoir fluids, and primary mineral assemblages; and (4) coupled hydromechanical effects, such as porosity and permeability change due to the aforementioned blocking of pores by carbonate particles and increased fluid pressures from CO₂ injection. Matching computerized tomography monitored laboratory experiments showed the uses of the simulation model. In the simulations dissolution and deposition of calcite as well as adsorption of CO₂ that showed the migration of CO₂ and the dissociation of CO₂ into HCO₃ and its subsequent conversion into carbonate minerals were considered. It was observed that solubility and hydrodynamic storage of CO₂ is larger compared to mineral trapping.     

A polydentate ligand based on 2,2’-dipyridylamine unit linked benzo-15-crown-5; alkali and transition metal complexes; photoresponsive ligand; antimicrobial evaluation against pathogenic microorganisms

Transition Metal Chemistry - New double-armed benzo-15-crown-5 compound (L) was successfully synthesized from 4’,5’-bis(bromethyl)benzo-15-crown-5 with 2,2’-dipyridylamine. The...     

Electrochemical polymerization of 1-(4-nitrophenyl)-2,5-di(2-thienyl)-1 H-pyrrole as a novel immobilization platform for microbial sensing

Two types of bacterial biosensor were constructed by immobilization of Gluconobacter oxydans and Pseudomonas fluorescens cells on graphite electrodes modified with the conducting polymer; poly(1-(4-nitrophenyl)-2,5-di(2-thienyl)-1 H-pyrrole) [SNS(NO₂)]. The measurement was based on the respiratory activity of cells estimated by the oxygen consumption at − 0.7 V due to the metabolic activity in the presence of substrate. As well as analytical characterization, the linear detection ranges, effects of electropolymerization time, pH and cell amount were examined by using glucose as the substrate. The linear relationships were observed in the range of 0.25–4.0 mM and 0.2–1.0 mM for G. oxydans and P. fluorescens based sensors, respectively.     

Synthesis and Antitumor,Antioxidant Effects Studies of N-Ethylpiperazine Substitute Thiourea Ligands and Their Copper(II) Complexes

A series of N-ethylpiperazine substitute thioureas [C₆N₂H₁₃NHCSNHR], where R = -C₃H₅ (L ₁ ), -C₁₀H₇ (L ₂ ), and -C₇H₇ (L ₃ ), and their copper (II) complexes have been synthesized. These ligands and complexes have been characterized by elemental analyses, IR, ¹H and ¹³C-NMR spectra, UV-Vis, magnetic susceptibility, thermogravimetrical analyses, and MALDI-TOF MS. In vitro antitumor activity of ligands and their complexes has been screened toward several tumor cell lines. The effects on these complexes of the growth of L1210 and MCF7 were studied comparatively with that of free ligands. Antioxidant and radical scavenging activities of synthesized compounds were determined by various in vitro assays including 1,1-diphenyl-2-picryl-hydrazyl free radicals (DPPH), 2,2′-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid radicals (ABTS+), and ferrous ion (Fe²⁺) chelating activities. Moreover, these activities were compared to synthetic and standard antioxidant trolox. The results showed that the synthesized compounds had effective antioxidant power.