Vanadate-stimulated release of hepatic lipase activity from liver.

Vanadate stimulated the release of rat hepatic lipase activity from liver slices into an incubation medium in a time- and dose-dependent manner. Insulin, however, failed to have this stimulatory action, and the release by heparin was recognized, but was not additive to that by vanadate. Amiloride, an inhibitor of tyrosine kinase in some receptors and of the Na+/H+ exchange system suppressed the vanadate-stimulated release. Biochanin A, a different type of tyrosine kinase inhibitor than amiloride, also suppressed the effect of vanadate. The stimulation by vanadate was clearly preserved in Na(+)-, K(+)-, or Ca(2+)-free medium, suggesting that neither the Na+/H+ exchange system, Na+, K(+)-adenosine triphosphatase, nor Ca(2+)-influx into cells is involved in the action of this substance. These results suggest that vanadate-stimulated release of the enzyme activity is associated with the activation of the tyrosine kinase activity.     

Deuterium relaxation time ofα-d-tryptophan included in cyclodextrin host molecules

Deuterium relaxation times ofd- andl--d-tryptophan included in -cyclodextrin derivatives were directly measured by deuterium NMR spectroscopy. The results showed that the molecular motion of the tryptophan molecule was strongly restricted even in the cavity of unmodified -cyclodextrin and the additional recognition groupings — ammonium and carboxylate — on -cyclodextrin did not affect the molecular motion of tryptophan, though the association constants were significantly enhanced.Deceased on March 22, 1987.     

Determination of heavy metal concentrations in plants exposed to different degrees of pollution using ICP-AES

Plant samples (Plantago lanceolata - narrow leaf plantain and Cichorium endiviae - endive) were collected in the surroundings of heavy metal emission sources and in other less contaminated areas. After digestion in a closed microwave system using HNO(3), the concentrations of Cd, Co, Cr, Cu, Fe, Mn, Mo, Ni, Pb, and Zn were determined using ICP-AES. Detection limits for all the elements of interest are given. Differences in heavy metal uptake rate between both plant species were observed. The uptake is more intensive for endive than for narrow leaf plantain. High concentrations of some heavy metals were determined in the unwashed plant samples as a result of exposure to aerosols. Tukey's statistical test was used to confirm the discrepancy of Cr concentration in plant samples from various areas. Washing the leaves with water was found to remove a large amount of water-soluble aerosols.     

Insight into the extractability of metals from soils using an implementation of the linear adsorption isotherm model

This paper deals with an often overlooked artifact in sequential and single extraction of metals from soils, viz. the volume to mass (V/m) ratio as a potential source for inadequate extraction yields. We offer a theoretical framework to get a grip on this intricate parameter and came up with a model based on a linear adsorption isotherm to derive the correct maximal metal extractability for a certain extractant. We verified the model experimentally using 0.1 mol l⁻¹ nitric acid for extraction of seven metals (Cr, Co, Cu, Cd, Pb, Ni and Zn) from an urban soil sample, and concluded that commonly used V/m ratios in the range of 10-40 ml g⁻¹ may give as much as 50% too low extraction yields. Thus, a strong caveat is in place as to be very critical what V/m ratios to use and preferably apply the model derived to obtain the correct maximal extractability using a variable V/m ratio method.     

Determination of a polymeric hindered amine light stabilizer in polypropylene formulated with magnesium hydroxide flame retardant by reactive thermal desorption-gas chromatography.

A polymeric hindered amine light stabilizer (HALS), Tinuvin 622 (MW [symbol: see text] 4000), in PP materials formulated with a magnesium hydroxide flame retardant was determined by reactive thermal desorption (RTD) gas chromatography (GC). Two kinds of the HALS components that were formed through the RTD in the presence of tetramethylammonium hydroxide [(CH3)4NOH, TMAH] were clearly observed in the chromatograms of the PP samples, with negligible interference from the other additives and the PP substrate. Here, the coexisting flame retardant was proved to affect significantly the RTD process of the occluded HALS. As a result, the recovery of the HALS components in the RTD-GC chromatograms of the PP samples increased with increase in the content of the flame retardant. This enhancement of the HALS recovery is attributed mainly to the preferential exposure of the HALS on the surface of the ground PP sample through the interaction between the polymeric HALS and the flame retardant in the molten PP during kneading. In spite of such a considerable action of the flame retardant, the observed intensities of the characteristic peaks of HALS by RTD-GC showed a good linear relationship with the HALS content in the PP samples with constant content of the flame retardant (50 phr); this relationship could be used as the calibration line for the determination of the polymeric HALS in the PP materials containing the flame retardant.     

Processes associated with ionic current rectification at a 2D-titanate nanosheet deposit on a microhole poly(ethylene terephthalate) substrate

Films of titanate nanosheets (approx. 1.8-nm layer thickness and 200-nm size) having a lamellar structure can form electrolyte-filled semi-permeable channels containing tetrabutylammonium cations. By evaporation of a colloidal solution, persistent deposits are readily formed with approx. 10-μm thickness on a 6-μm-thick poly(ethylene-terephthalate) (PET) substrate with a 20-μm diameter microhole. When immersed in aqueous solution, the titanate nanosheets exhibit a p.z.c. of − 37 mV, consistent with the formation of a cation conducting (semi-permeable) deposit. With a sufficiently low ionic strength in the aqueous electrolyte, ionic current rectification is observed (cationic diode behaviour). Currents can be dissected into (i) electrolyte cation transport, (ii) electrolyte anion transport and (iii) water heterolysis causing additional proton transport. For all types of electrolyte cations, a water heterolysis mechanism is observed. For Ca²⁺ and Mg²⁺ions, water heterolysis causes ion current blocking, presumably due to localised hydroxide-induced precipitation processes. Aqueous NBu₄⁺ is shown to ‘invert’ the diode effect (from cationic to anionic diode). Potential for applications in desalination and/or ion sensing are discussed.

     

Signal denoising and baseline correction by discrete wavelet transform for microchip capillary electrophoresis

Signal denoising and baseline correction using discrete wavelet transform (DWT) are described for microchip capillary electrophoresis (MCE). DWT was performed on an electropherogram describing a separation of nine tetramethylrohodamine-5-isothiocyanate labeled amino acids, following MCE with laser-induced fluorescence detection, using Daubechies 5 wavelet at a decomposition level of 6. The denoising efficiency was compared with, and proved to be superior to, other commonly used denoising techniques such as Fourier transform, Savitzky-Golay smoothing and moving average, in terms of noise removal and peak preservation by directly visual inspection. Novel strategies for baseline correction were proposed, with a special interest in baseline drift that frequently occurred in chromatographic and electrophoretic separations.     

Anomalous temperature dependence of the magnetic field induced antiferromagnetic moment in the antiferroquadrupolar ordered state of CeB6

The magnetic field induced antiferromagnetic moment M(AF) at low magnetic fields in the antiferroquadrupolar (AFQ) ordered phase of CeB6 was investigated by elastic neutron diffraction experiments for H parallel [110]. The peak intensity at the AF magnetic reciprocal point (1 / 2,1 / 2,1 / 2) corresponding to M(2)(AF) increases with decreasing temperature below the AFQ ordering temperature T(Q), and exhibits a broad maximum at T approximately 3 K and decreases with a further decrease of temperature. This unusual behavior of M(AF) at low fields is explained as a result of the competition between the AF-octupolar and AF-exchange interactions in the O(xy) type AFQ ordered state.     

Simultaneous quantification of curcuminoids and xanthorrhizol in Curcuma xanthorrhiza by high-performance liquid chromatography

A new method for simultaneous quantification of curcuminoids and xanthorrhizol (XNT) in Curcuma xanthorrhiza was developed and validated using high-performance liquid chromatography with diode-array UV–Vis detector. The chromatographic separation was achieved on a Phenomenex C18 at room temperature with the mobile-phase acetonitrile ?0.001% formic acid in gradient elution system and delivered at a flow rate of 1?mL/min. Detection wavelength 425?nm was used for curcuminoids and 224?nm for XNT. System suitability, linearity, precision, accuracy, limit of detection, limit of quantitation, and stability were evaluated and were found in good agreement with Association of Official Analytical Chemists guidelines for single-laboratory validation. The proposed method was found to be precise, accurate, and reliable and also could be applied for the simultaneous quantitative analysis of curcuminoids and XNT in C. xanthorriza raw material and its herbal medicinal product.     

Effective electrodeposition of Co-Ni-Cu alloys nanoparticles in the presence of alkyl polyglucoside surfactant

The effect of alkyl polyglucoside (APG) surfactant on the electrodeposition Co-Ni-Cu alloys nanoparticles has been investigated. In a typical electrodeposition experiment, it was found that as prepared Co-Ni-Cu alloys nanoparticles characteristics, such as size homogeneity, density, dispersion on the electrode substrate and the chemicals composition, depended strongly on the concentration of APG used in the reaction as well as the applied deposition potential. For the case of chemicals composition, low APG concentration (below CMC) was found to be effective for the preparation of excellent composition of the nanoalloys. Meanwhile, for the case of size homogeneity, density, and dispersion on the surface, high APG concentration (above CMC) and high deposition potential were preferred. It was also found that, at concentration above the CMC, the APG surfactant showed a metals ions deposition inhibition characteristic that caused increasing in the electrodeposition overpotential of the entire metals ions, namely cobalt, nickel and copper. As the result the copper was found to place a high percentage in the nanoalloys deposits. Owing to its simple procedure in controlling the composition and the nanoalloys growth characteristic, present approach should find a potential application in preparing Co-Ni-Cu magnetic nanoparticles for used in currently existing applications.