Low temperature plasma production of hydrogenated nanocrystalline silicon thin films

The hydrogenated nanocrystalline silicon (nc-Si:H) thin films were produced by capacitively-coupled plasma enhanced chemical vapor deposition (PECVD) technique at low substrate temperatures (T_s ≈ 40–200 °C). Firstly, for particular growth parameters, the lowest stable T_s was determined to avoid temperature fluctuations during the film deposition. The influence of the T_s on the structural and optical properties of the films was investigated by the Fourier transform infrared (FTIR), UV–visible transmittance/reflectance and X-ray diffraction (XRD) spectroscopies. Also, the films deposited at the center of the PECVD electrode and those around the edge of the PECVD electrode were compared within each deposition cycle. The XRD and UV–visible reflectance analyses reveal the nanocrystalline phase for the films grown at the edge at all T_s and for the center films only at 200 °C. The crystallinity fraction and lateral dark conductivity decrease with lowered T_s. FTIR analyses were used to track the hydrogen content, void fraction and amorphous matrix volume fraction within the films. The optical constants obtained from the UV–visible transmittance spectroscopy were correlated well with the FTIR results. Finally, the optimal T_s was concluded for the application of the produced nc-Si:H in silicon-based thin film devices on plastic substrates.     

Temperature and magnetic field responsive hyaluronic acid particles with tunable physical and chemical properties

We report the preparation and characterization of thiolated-temperature-responsive hyaluronic acid-cysteamine-N-isopropyl acrylamide (HA-CYs-NIPAm) particles and thiolated-magnetic-responsive hyaluronic acid (HA-Fe-CYs) particles. Linear hyaluronic acid (HA) crosslinked with divinyl sulfone as HA particles was prepared using a water-in-oil micro emulsion system which were then oxidized HA-O with NaIO₄ to develop aldehyde groups on the particle surface_. HA-O hydrogel particles were then reacted with cysteamine (CYs) which interacted with aldehydes on the HA surface to form HA particles with cysteamine (HA-CYs) functionality on the surface. HA-CYs particles were further exposed to radical polymerization with NIPAm to obtain temperature responsive HA-CYs-NIPAm hydrogel particles. To acquire magnetic field responsive HA composites, magnetic iron particles were included in HA to form HA-Fe during HA particle preparation. HA-Fe hydrogel particles were also chemically modified. The prepared HA-CYs-NIPAm demonstrated temperature dependent size variations and phase transition temperature. HA-CYs-NIPAm and HA-Fe-CYs particles can be used as drug delivery vehicles. Sulfamethoxazole (SMZ), an antibacterial drug, was used as a model drug for temperature-induced release studies from these particles.     

A nonnormal look at polychoric correlations: modeling the change in correlations before and after discretization

Two algorithms for establishing a connection between correlations before and after ordinalization under a wide spectrum of nonnormal underlying bivariate distributions are developed by extending the iteratively found normal-based results via the power polynomials. These algorithms are designed to compute the polychoric correlation when the ordinal correlation is specified, and vice versa, along with the distributional properties of latent, continuous variables that are subsequently ordinalized through thresholds dictated by the marginal proportions. The method has broad applicability in the simulation and random number generation world where modeling the relationships between these correlation types is of interest.     

An Easy Synthesis of Monofluorinated Derivatives of Pyrroles from β-Fluoro-β-Nitrostyrenes

The catalyst-free conjugate addition of pyrroles to β-Fluoro-β-nitrostyrenes was investigated. The reaction was found to proceed under solvent-free conditions to form 2-(2-Fluoro-2-nitro-1-arylethyl)-1H-pyrroles. The effectiveness of this approach was demonstrated through the preparation of a series of the target products in a quantitative yield. The kinetics of a conjugate addition of pyrrole was studied in detail to reveal the substituent effect and activation parameters of the reaction. The subsequent base-induced elimination of nitrous acid afforded a series of novel 2-(2-Fluoro-1-arylvinyl)-1H-pyrroles prepared in up to an 85% isolated yield. The two-step sequence herein proposed is an indispensable alternative to a direct reaction with elusive and unstable 1-Fluoroacetylenes.     

Photochemical reactions of M(CO)6 (M = Cr,Mo, W) with Ph2P(S)P(S)Ph2

New complexes {M(CO)₄[Ph₂P(S)P(S)Ph₂]} (M = Cr, Mo and W), (1a)–(3a), [(1a), M = Cr; (2a), M = Mo; (3a), M = W] and {M₂(CO)₁₀[-Ph₂P(S)P(S)Ph₂]} (M = Cr, Mo, W), [(1b)–(3b) [(1b), M = Cr; (2b), M = Mo; (3b), M = W]] have been prepared by the photochemical reaction of M(CO)₆ with Ph₂P(S)P(S)Ph₂ and characterized by elemental analyses, f.t.-i.r. and ³¹P-(¹H)-n.m.r. spectroscopy and by FAB-mass spectrometry. The spectra suggest cis-chelate bidentate coordination of the ligand in {M(CO)₄[Ph₂P(S)P(S)Ph₂]} and cis-bridging bidentate coordination of the ligand between two metals in (M = Cr, Mo and W).     

Thermosensitive mucoadhesive gel formulation loaded with 5-Fu: cyclodextrin complex for HPV-induced cervical cancer

Human Papilloma Virus (HPV) infections are the major cause of cervical cancers. To achieve a better therapeutic efficacy and patient compliance in the treatment for HPV-induced cervical cancers, anticancer agent 5-fluorouracil has been formulated in a vaginal gel using the thermosensitive polymer Pluronic^® F127 together with alternative mucoadhesive polymers e.g., hyaluronic acid, Carbopol 934 and hydroxypropylmethylcellulose. To increase its aqueous solubility and to achieve the complete release of 5-FU from the gel, the drug was incorporated as its inclusion complex with 1:1 molar ratio with either β-cyclodextrin or hydroxypropyl-β-cyclodextrin. Following the characterization of drug:CD complexes, thermosensitive gel formulations containing different mucoadhesive polymers and the drug in free or complexed form were characterized in vitro by determining the gelation temperature and the rheological behavior of different formulations along with the in vitro release profiles of these formulations in pH 5.5 citrate buffer. It was observed that complexation with cyclodextrin accelerated the release of 5-FU with the exception of formulation containing Carbopol 934 as mucoadhesive polymer. As far as rheological properties are concerned, favorable thermosensitive in situ gelling properties were obtained with formulations containing HPMC as mucoadhesive polymer. Complete release of 5-FU from gels were obtained with both complexes of β-CD and HP-β-CD and cytotoxicity studies against HeLa human cervical carcinoma cells demonstrated that 1% 5-FU:CD complexes were equally effective as 1% free 5-FU indicating better therapeutic efficacy with lower dose.     

Determining co-combustion characteristics,kinetics and synergy behaviors of raw and torrefied forms of two distinct types of biomass and their blends with lignite

Journal of Thermal Analysis and Calorimetry - In this study, the combustion characteristics and kinetics of various mixtures of both raw and torrefied rose pulp and red pine sawdust with each other...     

A unique continuation result for the plate equation and an application

In this paper, we prove the unique continuation property for the weak solution of the plate equation with the low regular coefficient. Then, we apply this result to study the global attractor for the semilinear plate equation with a localized damping. Copyright © 2015 John Wiley & Sons, Ltd.     

Photochemical reactions of metal carbonyls [M(CO)6 (M = Cr,Mo and W), Re(CO)5Br,Mn(CO)3Cp] with 2-hydroxyacetophenone methanesulfonylhydrazone (apmsh)

Five new complexes, [M(CO)₅(apmsh)] [M = Cr; (1), Mo; (2), W; (3)], [Re(CO)₄Br(apmsh)] (4) and [Mn(CO)₃(apmsh)] (5) have been synthesized by the photochemical reaction of metal carbonyls [M(CO)₆] (M = Cr, Mo and W), [Re(CO)₅Br], and [Mn(CO)₃Cp] with 2-hydroxyacetophenone methanesulfonylhydrazone (apmsh). The complexes have been characterized by elemental analysis, mass spectrometry, f.t.-i.r. and ¹H spectroscopy. Spectroscopic studies show that apmsh behaves as a monodentate ligand coordinating via the imine N donor atom in [M(CO)₅(apmsh)] (1–4) and as a tridentate ligand in (5).     

Effect of ionic environments on the adsorption and diffusion characteristics of serine alkaline protease enzyme in polyethersulfone ultrafiltration membranes

Static adsorption of serine alkaline protease (SAP) enzyme on hydrophobic polyether sulfone (PES) ultrafiltration membranes in different ionic environments was investigated. The amount of SAP adsorbed on membranes was the lowest at its isoelectric point (IEP) where the maximum adsorption was obtained below the IEP of the enzyme. The extent of SAP adsorption in the phosphate buffer solutions including different salts followed the order: (NH4)2HPO4 > KH2PO4 > Na2HPO4-NaH2PO4 (buffer) > CaCl2 > ((NH4)2HPO4 + H2PO4 + CaCl2), which was consistent with the Hofmeister series. The zeta potentials of membranes contacted with the ionic species were calculated by streaming potential measurements and found that the increase in ionic strength decreased the electrical double layer thickness leading to a decrease in adsorption. A model based on mass balance was developed to calculate the diffusion coefficient of SAP in PES membranes. Employing experimental data evaluated in a diffusion cell along with the data of adsorption isotherms, diffusion coefficients of SAP in PES membranes in the presence of different ionic species were calculated. To detect the structural changes occurred, membrane surfaces were analysed by Fourier transform infrared-attenuated total reflectance (FTIR-ATR) measurements.