Asymptotic profiles and asymptotic distributions of energy in elastic waves scattering

We compute the asymptotic wave profiles for the exterior problemin elasticity with homogeneous Neumann condition. We give preciseresults on the asymptotic distribution of the elastic energyin various subsets of space. These results are obtained viathe use of a recently developed extension of the scatteringtheory of C. Wilcox (Mabrouk & Helali, 2002).     

Generalized Maxwell model for the viscoelastic behavior of a soda-lime-silica glass under low frequency shear loading

The linear viscoelastic behavior of a soda-lime-silica glass under low frequency shear loading is investigated in the glass transition range. Using the time-temperature superposition technique, the master curves of the shear dynamic relaxation moduli are obtained at a reference temperature of 566°C. A method to determine the viscoelastic constants from dynamic relaxation moduli is proposed. However, some viscoelastic constants cannot be directly measured from the experimental curves and others cannot be precisely obtained due to non-linearity effects at very low frequencies. The generalized Maxwell model is investigated from the experimental dynamic moduli without fixing the viscoelastic constants. A set of parameters is shown to be in good agreement with the experimental dynamic relaxation moduli, but does not give the correct values of the viscoelastic constants of the investigated glass. The soda-lime-silica glass exhibits a non-linear viscoelastic behavior at very low stress level which is usually observed for organic glasses. This non-linear behavior is questioned.     

Genetic diversity and haplotype structure of 21 Y‐STRs,including nine noncore loci,in South Tunisian Population: Forensic relevance

Y chromosome STRs (Y‐STRs) are being used frequently in forensic laboratories. Previous studies of Y‐STR polymorphisms in different groups of the Tunisian population identified low levels of diversity and discrimination capacity (DC) using various commercial marker sets. This definitely limits the use of such systems for Y‐STRs genotyping in Tunisia. In our investigation on South Tunisia, 200 unrelated males were typed for the 12 conventional Y‐STRs included in the PowerPlex® Y System. Additional set of nine noncore Y‐STRs including DYS446, DYS456, DYS458, DYS388, DYS444, DYS445, DYS449, DYS710, and DYS464 markers were genotyped and evaluated for their potential in improving DC. Allele frequency, gene diversity, haplotype diversity (HD), and DC calculation revealed that DYS464 was the most diverse marker followed by DYS710 and DYS449 markers. The standard panel of 12 Y‐STRs (DC = 80.5%) and the nine markers were combined to obtain DC of 99%. Among the 198 different haplotypes observed, 196 haplotypes were unique (HD = 99.999). Out of the nine noncore set, six Y‐STRs (DYS458, DYS456, DYS449, DYS710, DYS444, and DYS464) had the greatest impact on enhancing DC. Our data provided putative Y‐STRs combination to be used for genetic and forensic applications.     

Prediction of mixed-mode fracture based on an elasto–plastic energy balance criterion

The maximum energy release rate criterion, i.e., G _max criterion, is commonly used for crack propagation analysis. This fracture criterion is based on the elastic macroscopic strength of materials. In the present investigation, however, the G _max criterion has been modified in order to accommodate the consideration of plastic strain energy. This modified criterion is extended to study the fatigue crack growth characteristics of mixed-mode cracks. To predict crack propagation due to fatigue loads, a new elasto–plastic energy model is presented. This new model includes the effects of material properties such as strain hardening exponent n, yield strength σ _y , and fracture toughness and stress intensity factor ranges. The results obtained are compared with those obtained using the commonly employed crack growth law and the experimental data.     

Size dependence of transition temperature in polymer nanowires

We studied the effect of changing temperature on the mechanical properties of nanosized poly(methyl methacrylate) wires fabricated by two-photon fabrication. At around room temperature, the nanowires showed a transition temperature where the shear modulus suddenly changed. This transition temperature was observed to decrease more than 40 K by decreasing the radius of the nanowires from 450 to 150 nm. This size is several times larger in nanowires than reported values of polymer thin film thickness showing a depression of the glass transition temperature.     

Photoassisted poling of azo dye doped polymeric films at room temperature

The reversible cis-trans photoisomerization of disperse red 1 (DR1) in PMMA thin films has been demonstrated to be strongly polarization sensitive [1]. In this communication two mechanisms are identified: the angular hole burning and the angular redistribution of molecules. It is shown that, in the presence of a DC electric field, the redistribution is not centrosymmetric and produces a poling of the film. The evolution of the second-order nonlinear susceptibility, ⁽²⁾, is monitored by measuring the electro-optic effect by attenuated total reflection and by second-harmonic generation.     

Synthesis of 2-methyl-2-propoxypropyl isocyanide and its Cu(I) tetraflouroborate complex

2-Methyl-2-propoxypropyl isocyanide [CNCH₂C(OPr)(CH₃)₂] and its Cu(I) tetrafluoroborate complex [Cu{CNCH₂C(OPr)(CH₃)₂}₄]BF₄ were prepared in good yields and purities. Both compounds were fully characterized by IR and NMR spectroscopy.     

Polarization effects in photoisomerization of azo dyes in polymeric films

The reversible cis-trans photoisomerization of disperse red 1 (DR1) in PMMA thin films has been demonstrated previously by using the Attenuated Total Reflection (ATR) method. In this communication photoisomerization of DR1 is shown to be strongly polarization sensitive. This new property of dye doped polymeric films could lead to practical applications in integrated optics. A simple molecular interpretation is given. Illumination of a DR1 sample by polarization fringes produces a grating of molecular orientation able to diffract a probe beam.     

Photoinduced alignment of azobenzene moieties in the side chains of polyglutamate films

The ‘trans↔cis’ reversible photoisomerization process tends to align azobenzene derivatives perpendicular to the polarization direction of the pumping beam. It is shown that in the trans→cis optical transition the cis state is aligned perpendicular to the pumping light polarization. This is shown for spin-coated films of ‘hairy-rod’ polyglutamate with azobenzene moieties in the side chains. Photoselection in both trans and cis states is demonstrated using the attenuated total reflection method.     

Measurement of nanomechanical properties of biomolecules using atomic force microscopy

The capabilities of atomic force microscopy (AFM) have been rapidly expanding beyond topographical imaging to now allow for the analysis of a wide range of properties of diverse materials. The technique of nanoindentation, traditionally performed via dedicated indenters can now be reliably achieved using AFM instrumentation, enabling mechanical property determination at the nanoscale using the high spatial and force resolutions of the AFM. In the study of biological systems, from biomolecules to complexes, this technique provides insight into how mesoscale properties and functions may arise from a myriad of single biomolecules. In vivo and in situ analyses of native structures under physiological conditions as well as the rapid analysis of molecular species under a variety of experimental treatments are made possible with this technique. As a result, AFM nanoindentation has emerged as a critical tool for the study of biological systems in their natural state, further contributing to both biomaterial design and pharmacological research. In this review, we detail the theory and progression of AFM-based nanoindentation, and present several applications of this technique as it has been used to probe biomolecules and biological nanostructures from single proteins to complex assemblies. We further detail the many challenges associated with mechanical models and required assumptions for model validity. AFM nanoindentation capabilities have provided an excellent improvement over conventional nanomechanical tools and by integration of topographical data from imaging, enabled the rapid extraction and presentation of mechanical data for biological samples.