Electrical conducting and magnetic properties of (ethylenedithiotetrathiafulvalenothioquinone-1,3-diselenolemethide)2.FeBr4 (GaBr4) crystals with two different interlayer arrangements of donor molecules

Two donor molecules newly synthesized, dimethylthio- and ethylenedithio-tetrathiafulvalenothioquinone-1,3-diselenolemethides (1 and 2), were used to prepare their charge-transfer (CT) salts with a magnetic FeBr(4)(-) counteranion. For 1, a low electrical conducting 1:1 salt (1.FeBr(4)) was obtained, in which molecules of 1 are tightly dimerized in a one-dimensional (1D) stacking column. On the other hand, 2 gave a 2:1 salt (2(2).FeBr(4)) as two different kinds of plate crystals (I and II). Both I and II possess similar stacking structures of molecules of 2 in each 1D column with a half-cut pipelike structure along the c axis. However, for I, the stacking columns are aligned in the same direction along the a and b axes, while for II they are in the same direction along the a axis, but in the reverse direction along the b axis, resulting in the difference in the relative arrangement of molecules of 2 and FeBr(4)(-) ions between the two crystals. The room-temperature electrical conductivities of the single crystals of I and II were 13.6 and 12.7 S cm(-)(1), respectively. The electrical conducting behavior in I was metallic above 170 K but changed to be semiconducting with a very small activation energy of 7.0 meV in the temperature range 4-170 K. In contrast, II showed the semiconducting behavior in the whole temperature range 77-285 K. The corresponding nonmagnetic GaBr(4)(-) salts with almost the same crystal structure as I and II showed definitively different electrical conducting properties in the metal to semiconductor transition temperature in I as well as in the magnitude of activation energy in the semiconducting region of I and II. The interaction between the d spins of FeBr(4)(-) ions was weak and antiferromagnetic in both I and II, but the magnitude of the spin interaction was unexpectedly larger compared with that in the FeBr(4)(-) salt of the corresponding sulfur derivative of 2 with closer contact between the neighboring FeBr(4)(-) ions. These electrical conducting and magnetic results suggest a significant interaction between the conducting pi electrons and the d spins of FeBr(4)(-) ions located near the columns or layers.     

Quantitative estimation of interaction between carbohydrates and concanavalin A by surface plasmon resonance biosensor

We measured the affinity of more than 20 sugars with concanavalin A (ConA) by an optical biosensor (surface plasmon resonance sensor) using asialofetuin (ASF) as an immobilized binding partner of ConA. We determined kinetic parameters of the effects of sugars on the dissociation of ConA from ASF quantitatively, and the structural requirements of the functional groups of sugars for binding with ConA. We found that the affinity of ConA for sugars is dependent on its conformation induced by interaction with the binding partner. In addition, the results showed that optical biosensor system is well mimics the interaction of ConA with sugars in biomembrane.     

Generation and reactivity of bis(2,6-diethylphenyl)germanium(II)

The title intermediate ($\text{3a}$) is produced on photolysis of hexakis(2,6-diethyl-phenyl)cyclotrigermane ($\text{1}$) or bis(2,6-diethylphenyl)bis(trimethylsilyl)germane ($\text{4}$) as evidenced by trapping experiments, and thermally dimerizes to tetrakis(2,6-diethyl-phenyl)digermene ($\text{2a}$). Diarylgermylenes such as $\text{3a}$ do not form stable triethylamine adducts (e.g. $\text{5a}$) as has been previously reported.     

Sol–gel preparation and properties of hydroxypropylcellulose–titania hybrid thin films

Hydroxypropylcellulose (HPC)–titania hybrid thin films were prepared by sol–gel method where titanium tetraisopropoxide Ti(OC₃H₇ ⁱ )₄ was hydrolyzed under acidic conditions in the presence of HPC, followed by dip-coating and drying at 120 °C for 24 h. The viscosity average molecular weight of HPC was 55,000–70,000 or 110,000–150,000, and the TiO₂/(HPC + TiO₂) mass ratio ranged from 0 to 1, which was calculated on the assumption that all Ti(OC₃H₇ ⁱ )₄ is converted into TiO₂. The films were 0.35–1.0 μm thick, transparent in visible region and opaque in ultraviolet (UV) region, where the optical absorption coefficient in UV region increased with increasing titania content. The refractive index increased with increasing titania content, ranging from 1.6 to 1.8 for the hybrid thin films. The pencil hardness increased from 6B to 5H, the durability in hot water significantly increased and the contact angle of water on films increased from 35° to 89° with increasing titania content. Crack-free films could be deposited on organic polymer substrates irrespective of titania or HPC contents, where cracking did not occur at higher HPC contents even when the substrate was bent.     

CHANGES IN THE PATTERNS OF BIOSYNTHESIS and COMPOSITION OF AMINO ACIDS IN A MARINE PHYTOPLANKTER EXPOSED TO ULTRAVIOLET-B RADIATION: NITROGEN LIMITATION IMPLICATED

Abstract— The impact of ultraviolet-B radiation (UVBR) on the biosynthesis and the composition of intracellular dissolved free and combined amino acids was examined in nitrate-replete and nitrate-deficient cultures of Tetraselmis sp. Several similarities were observed in the response of Tetraselmis sp. to nitrogen deficiency and exposure to UVBR, in support of a view that UVBR affects amino acid synthesis in phytoplankton via its inhibitory effects on nitrogen assimilation into the cells. At levels that still permitted the uptake of carbon into the cells, both nitrogen deficiency and UVBR exposure resulted in a reduction in the overall rates of carbon incorporated into amino acids, an increase in the absolute concentrations of amino acids within the intracellular dissolved free amino acid (INDFAA) pool and a decrease in the total cellular amino acid (TCAA) pool. An examination of the patterns of carbon assimilation into individual amino acids in cells exposed to UVBR revealed similarities with the patterns in cells subject to nitrogen deficiency. The most conspicuous changes from the controls included an increased incorporation of ¹³C into glutamic' acid (glutamic acid + glutamine) and aspartic acid and a marked reduction into alanine and valine. Changes in the concentrations of amino acids within the INDFAA and TCAA pools were also similar in nitrate-deficient and UVBR-exposed cells and resembled the carbon assimilation patterns. These results strongly suggest that UVBR-induced changes in the biosynthesis and composition of amino acids are probably via its suppression of nitrogen assimilation into the cells.     

Polymer-supported bases. IX. Synthesis and catalytic activity of polymer-bound 4-(1-pyrrolidino)pyridine moieties

Polystyrene-bound 4-(1-pyrrolidino)pyridine moieties were prepared by the reaction of chloromethylated polystyrene resins with pyrrolidinopyridine derivatives containing hydroxyl groups. The supported amines were effective catalysts for acylations of tert-alcohols or enols, acylrearrangements, and diester synthesis from epoxides and anhydrides. Some of the low ring-substituted (8–15%) catalysts exhibited high activity comparable to that of 4-(N,N-dimethylamino)pyridine, though the activity was a little lower than that of 4-(1-pyrrolidino)pyridine. The recovered catalysts can be re-used, except for acyl rearrangements, without significant decrease in activity.     

Removal of fine powders from film surface. I. Effect of electrostatic force on the removal efficiency

A novel fine particle removal system composed of a corona-discharge neutralizer, a pulse-jet air unit and an image processing system has been developed. First of all, adhesion force between particle and film was directly measured and effect of electrostatic force on the adhesion force was calculated experimentally and theoretically. The electrostatic force was found to be significant, leading to the suggestion that the countermeasure for the electrostatic force was required to effectively remove fine particles. This system was then applied to the removal of fine particles from surface of a gelatin film used for conventional capsule material. The number of particles removed by the system was calculated by an image processing system and number base removal efficiency was computed with and without the elimination of electrostatic charge by the neutralizer. It was found that the difference between the removal efficiency of particles with elimination of electrostatic charge and that of without the elimination showed linear relationship with the electrostatic adhesion force. The data confirmed the necessity of electrostatic charge elimination for the effective removal of fine particles.