Effects of Ultraviolet-B Exposure on the Resistance to Listeria monocytogenes in the Rat

A rat infection model using the bacterial pathogen Listeria monocytogenes was employed to analyze the im-munosuppressive activity of UVB radiation. Rats were exposed to suberythemal doses of UVB radiation for 5 or 7 consecutive days, using Kromayer or FS40 lamps respectively. Subsequently, the rats were infected subcuta-neously or intravenously with Listeria . Exposure to UVB resulted in an increased number of bacteria in the spleen 4 days after infection. Listeria -specific lymphocyte proliferation assays as well as delayed-type hypersensitivity reactions demonstrated that T cell-mediated immunity to Listeria was impaired by UVB as measured 4 and 8 days after infection. In addition, UVB exposure decreased phagocytotic activity of peripheral blood macrophages. This study demonstrated that suberythemal doses of UVB radiation caused a delay in the clearance of Listeria bacteria from the spleen of the rats and that this was probably caused by impaired nonspecific phagocytosis of Listeria by macrophages in addition to an impaired activity of Listeria -specific T cells.     

Identification of the hydrolysis products of AlCl3.6H2O by electrospray ionization mass spectrometry

The hydrolysis reactions of AlCl3 in 0.1 M aqueous solutions at pH 3.27-4.20 were monitored by electrospray ionization time-of-flight mass spectrometry (ESI-ToF MS) as a function of time. The cationic and anionic ESI mass spectra of aluminum(III) solutions gave strong evidence of the presence of a variety of monomeric and polymeric complexes. Competition between the OH- and Cl- ligands within the same aluminum core was observed. The influence of the sample cone voltage on the product distribution was also explored. The optimum sample cone voltage for the cationic spectra was 70 V. For the anionic spectra no optimum sample cone voltage was found and the appearance of the anionic spectra was strongly dependent on the sample cone voltage within the whole range explored.     

Crystallisation behaviour of high density polyethylene blends with bimodal molar mass distribution: 2. Non-isothermal crystallisation

Crystallisation of high density polyethylene (HDPE) blends with broad bimodal molar mass distribution was investigated by differential scanning calorimetry (DSC) under non-isothermal conditions. The blends were prepared by blending a high molar mass PE (M_w=330 kg/mol, M_w/M_n=4.8) and a low molar mass linear PE (M_w=34 kg/mol, M_w/M_n=10) in different ratios in xylene solution. The samples were analysed by the normal DSC at different crystallisation rates and by a thermal fractionation technique.The blends and their parent polymers behaved according to general expectations i.e., crystallinity and density decreased when the molar mass of the samples increased. Additionally, non-linear relationships between MM and different analysed parameters were found. Small addition of the high molar mass parent polymer to the low molar mass parent polymer increased crystallisation temperature, although the general trend was decreasing. Furthermore, a complicated relationship between the reciprocal of crystallisation half-time and sample composition was found. The value increased first with increasing molar mass, reached a maximum when the average molar mass of the blend was between 150 and 200 kg/mol and then decreased. The detected maximum correlated with the broadest molar mass distribution of the blends. The crystallinities and densities of the blends with the broadest molar mass distribution also deviated from the linear correlation between them and molar mass. The Avrami index under non-isothermal conditions was analysed with a method developed by Harnisch and Muschik. The results indicated that thermal nucleation and spherical growth regimes are present in all studied materials.     

Crystallisation behaviour of high density polyethylene blends with bimodal molar mass distribution 1. Basic characteristics and isothermal crystallisation

Isothermal crystallisation of high density polyethylene (HDPE) blends and their parent polymers was investigated. The blends having broad bimodal molar mass distributions and various compositions were prepared by blending a high molar mass (M_w=330 kg/mol, M_w/M_n=4.8) and a low molar mass HDPE (M_w=34 kg/mol, M_w/M_n=10) in different ratios in xylene solution. The blends and their parent components were characterised by size-exclusion chromatography, dynamic rheological and density measurements. Crystallisation kinetics were studied using a polarised light microscope equipped with an in-house built hot stage and by differential scanning calorimetry. The Avrami theory was applied for crystallisation kinetics analysis. Such crystallisation kinetics parameters as nucleation rate, nucleation density, the Avrami index and cystallisation rate contant were determined for the blends and their parent polymers.According to the results obtained an increasing polydispersity of the sample had a slight increasing effect on the Avrami index, indicating gain in prevalence of the thermal nucleation over the athermal one. In all samples nucleation density increased continuously during crystallisation verifying that the presence of a certain thermal nucleation was typical for all the materials studied. Both the crystallisation rate constant and the nucleation rate decreased with increasing molar mass of the sample. The nucleation density increased proportionally to the increase in average molar mass and the values were larger at lower crystallisation temperatures.The formed supermolecular structure was found to be sensitive to the blend composition and crystallisation temperature. Irregular banded or non-banded spherulites were observed in the materials. Banding of spherulites was typical for the samples having higher average molar mass. The superstructures observed in this work were smaller and vaguer than the superstructures reported in the earlier studies of polyethylene materials having similar average molar mass but narrow molar mass distribution.     

Crystallization behavior of some unimodal and bimodal linear low‐density polyethylenes at moderate and high supercooling

Effect of molar mass distribution (MMD) and composition distribution (CD) on crystallization behavior of linear low‐density polyethylene materials at moderate and high supercooling was studied using differential scanning calorimetry, hot‐stage polarized light microscopy, small‐angle light scattering, and chip nanocalorimetry methods. A set of uni‐ and bimodal materials having small variation in average molar mass, density, and melt flow rate, but large differences in MMD and CD, was investigated. The results indicate a clear effect of structural heterogeneity on morphology and crystallization behavior of the materials. Broader MMD and CD increased in average radius of superstructures, melting, crystallization temperatures, and isothermal crystallization rate at different supercoolings. Origin of such behavior is discussed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1577–1588, 2008     

In situ production of nanocomposites of poly(vinyl alcohol) and cellulose nanofibrils from Gluconacetobacter bacteria: effect of chemical crosslinking

Nanocomposites of poly(vinyl alcohol) (PVA) reinforced with bacterial cellulose (BC) were bioproduced by Gluconacetobacter genus bacteria. BC was grown from a culture medium modified with water-soluble PVA to allow in situ assembly and production of a novel nanocomposite that displayed synergistic property contributions from the individual components. Chemical crosslinking with glyoxal was performed to avoid the loss of PVA matrix during purification steps and to improve the functional properties of composite films. Reinforcement with BC at 0.6, 6 and 14 wt% content yielded nanocomposites with excellent mechanical, thermal and dimensional properties as well as moisture stability. Young’s modulus and strength at break increased markedly with the reinforcing BC: relative to the control sample (in absence of BC), increases of 15, 165 and 680 % were determined for nanocomposites with 0.6, 6 and 14 % BC loading, respectively. The corresponding increase in tensile strengths at yield were 1, 12 and 40 %, respectively. The results indicate an exceptional reinforcing effect by the three-dimensional network structure formed by the BC upon biosynthesis embedded in the PVA matrix and also suggest a large percolation within the matrix. Bonding (mainly hydrogen bonding) and chemical crosslinking between the reinforcing phase and matrix were the main contributions to the properties of the nanocomposite.     

Hydrolysis products of water treatment chemical aluminium sulfate octadecahydrate by electrospray ionization mass spectrometry

Hydrolysis and speciation of aluminium sulfate octadecahydrate Al₂(SO₄₎₃·18H₂O${\text{Al}}_2({\text{SO}}_4{)}_3·18{\text{H}}_2\text{O}$ was studied by electrospray time of flight mass spectrometry (ESI TOF MS). Several novel polymeric species were determined. Highly charged polymers, characterized by other methods, such as the Keggin cation [Al₁₃O₄(OH)₂₄(H₂O)₁₂]⁷⁺ and the octameric aluminium hydroxide cluster [Al₈(OH)₁₄(H₂O)₁₈](SO₄)₅ 16H₂O, were found using ESI-MS as the anions [Al₁₃O₄(OH)₂₅(SO₄)₄]²⁻ and [Al₈O(OH)₁₄(SO₄)₅(H₂O)₄]²⁻. All the main species identified contained sulfate or hydrogen sulfate. The compositions of the determined ions mimicked those of several stable mineral forms.     

Identification and fragmentation of hydrolyzed aluminum species by electrospray ionization tandem mass spectrometry

Earlier characterization of some hydrolysis products of AlCl₃·6H₂O was confirmed by electrospray ionization tandem mass spectrometry with increasing collision energy of projectile ions. At lower collision energies, the aqua ligands were stripped off. At higher energies, two hydroxo groups formed a bridging oxo group with loss of one water molecule. Aluminum complexes could also capture aqua ligands in the collision chamber so long as the parent ion did not fragment, and the fragment ion spectra broadened toward higher m/z values. The chloro ligands were eliminated as hydrochloric acid. The aluminum cores remained highly intact. Copyright © 2004 John Wiley & Sons, Ltd.