A simple,direct synthesis of Na2Fe(CO)4

Summary Reduction of anhydrous FeCl₃ in THF with sodium naphthalenide under a CO atmosphere at room temperature leads directly to Na₂Fe(CO)₄, which on reaction with alkyl bromides gives the corresponding aldehydes, ketones and carboxylic acids under appropriate conditions.     

DSC analysis of Al6061 aluminum alloy powder by rapid solidification

Differential scanning calorimetry (DSC) is a powerful technique that measures the heat evolution from a sample under a controlled condition and studies the phase transformation, precipitation, and dissolution activities. In this work, we investigated the influence of admixed silicon and silicon carbide and the effect of different atmospheres on the heat flow properties and microstructure of atomized Al6061 powder using DSC and scanning electron microscopy. The DSC analysis revealed the addition of silicon considerably decreased the temperature of first endothermic peaks. With an increase in silicon content the enthalpy for the first endothermic peak increased, whereas the second endothermic peak decreased. An endothermic peak, indicating the formation of AlN, was observed for powders without the silicon addition, but was noticeably absent in the case of alloys with Si addition. The SiC addition has no influence on changing the enthalpy of the systems we investigated. The reason for this behavior is analyzed and presented in this article.     

A Simple and Efficient Approach for Estimating Recovery of a Preparative Reversed Phase HPLC Purification

The widely applied reversed phase high-performance liquid chromatography (RP-HPLC) is an indispensable purification technique in drug discovery. During drug discovery, recovery was usually calculated based on the weight of the purified product after drying over the weight of the crude material multiplied by the assumed purity from HPLC/UV area percent of the product. Such a purity assumption can be off significantly when the crude material contains water, solvents, other UV-inactive impurities and inorganic salts. In this paper, we report a simple and efficient way to estimate recovery of preparative HPLC purification process. It is based on the ratio of the HPLC/UV peak area measured for the product in the crude solution and that in the final collected fraction with both accounted for their volumes. This approach eliminates not only the need for drying of the collected fraction to calculate recovery but also the inaccuracy associated with the true content in the crude sample using the traditional method. A systematic study was conducted to verify this method using caffeine mixed with various UV-active and -inactive impurities. The calculated recoveries using this approach were found to be consistent within 4% with the true recoveries based on dry weight estimation. The approach has been successfully applied for our in-house purifications. Furthermore, the approach was extended to library purifications, where in many cases heart-cutting the desired peaks is used to meet the purity requirements.

     

TG–DSC–FTIR–MS study of gaseous compounds evolved during thermal decomposition of styrene-butadiene rubber

The thermal decomposition behavior of styrene-butadiene rubber was studied using a system equipped with thermogravimetric analysis, differential thermal analysis, Fourier transform infrared spectroscopy, and mass spectroscopy. Two different experiments were conducted. From these experiments, thermogravimetric analysis results indicated a mass loss of 58 % in the temperature range of ~290–480 °C and a mass loss of 39 % in the temperature range beyond 600 °C. Scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy confirmed the presence of oxides, even at 1,000 °C, accounting for the Zn, Mg, Al, Si, and Ca in the original sample.     

Enhanced Production of Laccase from Coriolus versicolor NCIM 996 by Nutrient Optimization Using Response Surface Methodology

Plackett and Burman design criterion and central composite design were applied successfully for enhanced production of laccase by Coriolus versicolor NCIM 996 for the first time. Plackett and Burman design criterion was applied to screen the significance of ten nutrients on laccase production by C. versicolor NCIM 996. Out of the ten nutrients tested, starch, yeast extract, MnSO(4), MgSO(4) x 7H(2)O, and phenol were found to have significant effect on laccase production. A central composite design was applied to determine the optimum concentrations of the significant variables obtained from Plackett-Burman design. The optimized medium composition for production of laccase was (g/l): starch, 30.0; yeast extract, 4.53; MnSO(4), 0.002; MgSO(4) x 7H(2)O, 0.755; and phenol, 0.026, and the optimum laccase production was 6,590.26 (U/l), which was 7.6 times greater than the control.     

Crystallization and X-Ray Diffraction Studies of Salmonella Invasion Protein D (SipD), Insight Tip Component of Salmonella typhi Type III Secretion System

Crystallography Reports - Many pathogenic gram-negative bacteria including Salmonella typhi utilize type III secretion systems (T3SSs) to inject bacterial proteins into host cells and to initiate...     

Temperature-dependent lasing and spectroscopy of Yb:Y2O3 and Yb:Sc2O3

Spectroscopic and laser properties of Yb³⁺ in ceramic Y₂O₃ have been studied at room and cryogenic temperatures. Laser performance is very substantially improved by cooling to liquid nitrogen temperature, primarily due to the great reduction in ground state absorption that permits laser operation on the much stronger 1030-nm emission line rather than the 1077-nm line. The 976-nm “zero line” is observed to become much weaker as the temperature is reduced. Several models for this behavior are considered, but none adequately explains this surprising result. Spectroscopy of Yb:Sc₂O₃ indicates that it is likely to be an even better cryogenic gain material, given samples of comparable optical quality.