Enhancing the Water Stability of Al‐MIL‐101‐NH2 via Postsynthetic Modification

The resistance of metal–organic frameworks towards water is a very critical issue concerning their practical use. Recently, it was shown for microporous MOFs that the water stability could be increased by introducing hydrophobic pendant groups. Here, we demonstrate a remarkable stabilisation of the mesoporous MOF Al‐MIL‐101‐NH₂ by postsynthetic modification with phenyl isocyanate. In this process 86 % of the amino groups were converted into phenylurea units. As a consequence, the long‐term stability of Al‐MIL‐101‐URPh in liquid water could be extended beyond a week. In water saturated atmospheres Al‐MIL‐101‐URPh decomposed at least 12‐times slower than the unfunctionalised analogue. To study the underlying processes both materials were characterised by Ar, N₂ and H₂O sorption measurements, powder X‐ray diffraction, thermogravimetric and chemical analysis as well as solid‐state NMR and IR spectroscopy. Postsynthetic modification decreased the BET equivalent surface area from 3363 to 1555 m² g^?1 for Al‐MIL‐101‐URPh and reduced the mean diameters of the mesopores by 0.6 nm without degrading the structure significantly and reducing thermal stability. In spite of similar water uptake capacities, the relative humidity‐dependent uptake of Al‐MIL‐101‐URPh is slowed and occurs at higher relative humidity values. In combination with ¹H‐²⁷Al D ‐HMQC NMR spectroscopy experiments this favours a shielding mechanism of the Al clusters by the pendant phenyl groups and rules out pore blocking.     

Separation strategy for acidic chiral pharmaceuticals with capillary electrochromatography on polysaccharide stationary phases

The effect of five factors on the capillary electrochromatographic enantioseparation of acidic compounds was studied using an experimental design. The studied factors were pH, acetonitrile content in the mobile phase, temperature, buffer concentration, and applied voltage. These experiments allowed defining a generic separation strategy applicable on acidic compounds with chemical and structural diversity. The starting screening conditions consist of a 45 mM ammonium formate electrolyte at pH 2.9 mixed with 65% acetonitrile, an applied voltage of 15 kV, and a temperature of 25 degrees C. The screening phase occasionally can be followed by an optimization procedure. Evaluation of the proposed strategy pointed out that it allows achieving baseline resolution within a relatively short time when a beginning of separation is obtained at the starting conditions. This strategy revealed enantioselectivity for 11 compounds out of 15, of which 10 could be baseline-separated after the proposed optimization steps.     

Polymers from 4,4′-thiodiphenol

Polyesters were made with aromatic diacid chlorides and 4,4,-thiodiphenol. Isophthaloyl chloride and/or terephthaloyl chloride were used as acid chlorides alone or together with 5-cyanoisophthaloyl chloride or [2.2]p-cyclophane-3,9-dicarboxylic acid chloride. The latter components were incorporated in order to make the polymers useful for crosslinking. A polyether could be obtained by polycondensation of 2,4-dichloro-benzonitrile and 4,4′-thiodiphenol. The polycondensations were run in nitrobenzene as solvent.     

Aromatic polyethers,polysulfones, and polyketones as laminating resins. V. Polymers containing acetylenic side groups

1,3-Bis(p-phenoxybenzenesulfonyl)benzene and 4,4′-diphenoxydiphenyl sulfone were polymerized with isophthaloyl and terephthaloyl chloride in Friedel-Crafts type polymerizations. These polymers had 2,4-diphenoxyacetophenone in the backbone. The acetyl group was then converted into an acetylene group. They were crosslinked effectively by cyclization of the acetylene groups with a catalyst or by cyclo-addition with bisnitrile oxides.     

Quantitative analysis of delta9-tetrahydrocannabinol in preserved oral fluid by liquid chromatography-tandem mass spectrometry

A rapid and sensitive method for the analysis of delta9-tetrahydrocannabinol (THC) in preserved oral fluid was developed and fully validated. Oral fluid was collected with the Intercept, a Food and Drug Administration (FDA) approved sampling device that is used on a large scale in the U.S. for workplace drug testing. The method comprised a simple liquid-liquid extraction with hexane, followed by liquid chromatography-tandem mass spectrometry (LC-MS-MS) analysis. Chromatographic separation was achieved using a XTerra MS C18 column, eluted isocratically with 1 mM ammonium formate-methanol (10:90, v/v). Selectivity of the method was achieved by a combination of retention time, and two precursor-product ion transitions. The use of the liquid-liquid extraction was demonstrated to be highly effective and led to significant decreases in the interferences present in the matrix. Validation of the method was performed using both 100 and 500 MicroL of oral fluid. The method was linear over the range investigated (0.5-100 ng/mL and 0. 1-10 ng/mL when 100 and 500 microL, respectively, of oral fluid were used) with an excellent intra-assay and inter-assay precision (relative standard deviations, RSD <6%) for quality control samples spiked at a concentration of 2.5 and 25 ng/mL and 0.5 and 2.5 ng/mL, respectively. Limits of quantification were 0.5 and 0.1 ng/mL when using 100 and 500 microL, respectively. In contrast to existing GC-MS methods, no extensive sample clean-up and time-consuming derivatisation steps were needed. The method was subsequently applied to Intercept samples collected at the roadside and collected during a controlled study with cannabis.     

Aromatic polyethers,polysulfones, and polyketones as laminating resins. IV. Polymers with p-cyclophane units for crosslinking

1,3-Bis(p-phenoxybenzenesulfonyl)benzene, 4,4′-bis(p-phenoxybenzenesulfonyl)diphenyl ether, and 4,4′-diphenoxydiphenyl sulfone were polymerized with isophthaloyl or terephthaloyl chlorides in Friedel-Crafts type polymerizations. These polymers had [2,2]p-cyclophane units in the backbone, introduced by employing 3,9-bis(p-phenoxybenzoyl) [2.2]p-cyclophane as part of the polyaryl ether component. Thermolysis of the dimethylene bridge of the [2.2]p-cyclophane monomer produced diradicals which combined across polymer chains to provide crosslinks. p-Cyclophane polymers with 1,3-bis-(p-phenoxybenzenesulfonyl)benzene showed potential as high performance, thermally stable laminating resins.     

Gas chromatography-mass spectrometry as a tool for estimating odour concentrations of biofilter effluents at aerobic composting and rendering plants

The relationship between chemical concentrations (gas chromatography–mass spectrometry analysis) and odour concentrations (olfactometry) was studied for biofilter emissions from four aerobic vegetable, fruit and garden waste (VFG) composting plants and one animal rendering plant. For the VFG composting plants, the study revealed a good linear relationship of the odour concentration with the total volatile organic compounds (VOC) concentration (R²=0.97, n=16) as well as with the concentration of esters and ketones (R²=0.9, n=19). For biofilter emissions of the animal rendering plant, the total VOC concentration was a poor estimator for odour concentration. However, for this type of odour, concentrations of organic sulphur containing compounds correlated well with odour concentrations (R²=0.94, n=8). The results of the study also showed that the relationship between chemical and odour concentrations is specific for each type of odour and cannot be generalized.     

Degradation of cellulosic key chromophores by ozone: a mechanistic and kinetic study

Cellulose - Chromophores, colored substances of rather high stability that reduce brightness, are present in all kinds of cellulosic products, such as pulp, fibers, aged cellulosic material, and...     

Nonlinear optical polymers. Second harmonic generation in corona-poled thin films

The synthesis and second harmonic coefficients, d_3,1 and d_3,3 as well as the related susceptibilities χ⁽²⁾_zzz of five series of (NLO-dye methacrylate)-(methyl methacrylate) copolymers were investigated. The NLO-chromophores bound covalently to the polymer backbone were 5-(2,2-dicyanovinyl)-or 4-(2-cyano-2-methoxycarbonyl)vinyl-1-piperidino-2-thiophene (P₁ and P₂), 4-nitro-4′-alkoxy-stilbene (P₃), 4-nitro-3′-methoxy-4′-alkoxystilbene (P₄) and 4-nitro-4′-alkoxy-α-cyano stilbene (P₅). The second order nonlinear optical properties of corona-poled aligned thin polymer films, using a needle electrode in order to induce noncentrosymmetry, were evaluated. Nonlinear susceptibilities, χ⁽²⁾_zzz, of the films were derived from the analysis of full-angle Maker fringe patterns at 1064 nm, χ⁽²⁾_zzz values as high as 1.98×10⁻⁷ esu for P₂ copolymers and of 1.19×10⁻⁷ esu for P₃ copolymers could be achieved.