Experiment of C-Band Wavelength Conversion in a Silicon Waveguide Pumped by Dispersed Femtosecond Laser Pulse

We experimentally demonstrate the C-band wavelength conversion using four-wave mixing in a 17-mm-long silicon-on-insulator waveguide pumped by a dispersed mode-locked femtosecond laser pulse. The idler can be observed with an incident average pump power lower than 4 dBm, and about 35 nm of conversion bandwidth from 1530nm to 1565nm is measured by using a 1550-nm pump wavelength. The pulse-pumped efficiency is demonstrated to be higher, by more than 22 dB, than the cw-pumped efficiency. The conversion efficiency variations with respect to the pump and signal powers are also investigated.     

Characterization and estimation of refractive index profile of laser-written photopolymer optical waveguides

In this study, channel waveguides fabricated in photopolymer films by direct-writing using a low-power CW laser, are used as phase objects in a simple plane-wave diffraction setup, and the refractive index modulation profiles of the waveguides are characterized using the recorded diffraction patterns. Index profiles are modeled by piece-wisely combining two Gaussian functions representing the central and the tail regions. Measured diffraction patterns are matched with patterns generated using the model. This simple model makes it possible to design various channel waveguides embedded into polymer substrates. The proposed model is tested on three distinctive waveguide profiles written on the same Acrylamide/Polyvinyl Alcohol based photopolymer with different exposures.     

Rayleigh Scattering of 59.5 keV γ-Rays by Mo and Sn

The differential cross sections for coherent scattering of 59.5 keV γ-rays by Mo and Sn were measured using a high-purity germanium detector. The results were compared with predictions of form factor theories and S-matrix calculations.     

Unitary quantum groups,quantum projective spaces andq-oscillators

We discuss the parametrization of quantum groups in terms of independent operators. We find that this consideration leads to the parametrization ofSU _q(2) in terms of aq-oscillator plus a commuting phase. The commuting phase is naturally identified with the subgroupU(1) and the remaining cosetSU _q(2)/U(1)=CP _q(1) consists of aq-oscillator. For unitary quantum groupsSU _q (n), the analogous construction results in the quantum projective spaceSU _q(n+1)/U _q (n)=CP _q (n) being identified with then-dimensionalq-oscillator. This yields a nonlinear action of the quantum groupSU _q(n+1) on then-dimensionalq-oscillator.     

Using Raman Spectroscopy to Investigate the Molecular Level Characteristics of Endometriosis

Optics and Spectroscopy - Endometriosis is a benign gynecologic disorder. It is particularly common among young women and may make pregnancy difficult. In this study molecular level...     

Phthalocyanine with a giant dielectric constant

Compound 1 has been prepared by the reaction of 4-nitrophthalonitrile and trans-2-methoxy-4-(2-nitrovinil)phenol by the common method of nucleophilic substitution of an activated nitro group in an aromatic ring. The metallophthalocyanines 2, 3 were prepared by the reaction of a dinitrile derivative with Co(OAc)(2) or Zn(OAc)(2) in DMSO. The lutetium bis-(phthalocyaninato) complex 4 was obtained by treating the dinitrile derivative with lutetium acetate and DBU in 1-hexanol. The new compounds were characterized by elemental analyses, FT-IR, (1)H-NMR, MALDI-TOF MS and UV/Vis spectral data. The spectroscopic data of the new compounds were in accordance with the structures. The temperature and frequency dependence of dielectric and conduction properties of the spin coated film of compounds (2-4) have been studied by fabricating metal-Pc-metal structures. The results show that compound 2 has giant dielectric constant. At a low range of frequency and room temperature, ε' is found to be equal to 2.33 × 10(6), 1.53 × 10(4) and 1.03 × 10(4) for 2, 3 and 4, respectively. The giant dielectric behavior of 2 is mainly attributed to Maxwell-Wagner polarization. The obtained results also indicated that the frequency dependence of the dielectric permittivity, ε'(ω), exhibits non-Debye type relaxation for all temperatures investigated. The ac conductivity results gave a temperature dependent frequency exponent s. The results were compared with the prediction of the Quantum Mechanical Tunneling and Correlated Barrier Hopping models.     

Poly(amidoamine) dendrimer‐coated magnetic nanoparticles for the fast purification and selective enrichment of glycopeptides and glycans

Glycosylated proteins modulate various important functions of organisms. To reveal the functions of glycoproteins, in‐depth characterization studies are necessary. Although mass spectrometry is a very efficient tool for glycoproteomic and glycomic studies, efficient sample preparation methods are required prior to analyses. In the study, poly(amidoamine) dendrimer‐coated magnetic nanoparticles were presented for the specific enrichment and fast purification of glycopeptides and glycans. The enrichment and purification performance of the developed method was evaluated both at the glycopeptide, and the glycan level using several standard glycoprotein digests and released glycan samples. The poly(amidoamine) dendrimer‐coated magnetic nanoparticles not only showed selective affinity (Immunoglobulin G/Bovine Serum Albumin, 1/10 by weight) to glycopeptides and released glycans but also good sensitivity (0.4 ng/µL for Immunoglobulin G) for glycoproteomic and glycomic applications. Thirty‐five glycopeptides of Immunoglobulin G were detected after enrichment with poly(amidoamine) dendrimer‐coated magnetic nanoparticles. In addition, 55 ¹⁸O tagged deamidated glycopeptides belonging to human plasma glycoproteome were confirmed. Finally, fifty 2‐aminobenzoic acid, and 30 procainamide‐labelled human plasma N‐glycans released from human plasma glycoproteins were determined after purifications. The results indicate that the proposed enrichment and purification method using poly(amidoamine) dendrimer‐coated magnetic nanoparticles could be simply adjusted to sample preparation methods.     

A facile gamma-ray method for radiodegradation of bilirubin in chloroform

Kinetics and concentration profile associated with the regulated radiodegradation of bilirubin in an organic solvent were assessed. The pure unconjugated specimen was prepared in chloroform (40.0 μM). The depletion of bilirubin was almost linear with dose, and complete degradation was accomplished with doses in excess of 100 Gy. The method was also evaluated for the explicit production of the long-wavelength isomer of biliverdin, which was characterized spectrometrically by an absorbance band in the region 600–650 nm. Results including differences in air, N₂ and O₂ purged samples are presented to identify the atmospheric medium for optimum production of biliverdin. The process was regulated by controlling the dose. The general rate constant of the depletion process was estimated at a dose rate of 5.67·10⁻²Gy·s⁻¹. The method is a convenient substitute for light illumination studies of bilirubin. This revised version was published online in July 2006 with corrections to the Cover Date.     

Synthesis,identification and study of electrical conductivity of the doped poly aniline

Poly aniline and poly aniline doped with 2,5-dimethyl benzene sulfonic acid (PXSA), 4-hydroxy-m-benzene disulfonic acid (PDSA), 3-chloro-4-hydroxybenzene sulfonic acid (OCPSA) were prepared. The polymers are identified by FT-IR and UV–vis spectroscopy. The ionic conductivities of poly aniline and poly aniline doped with 2,5-dimethyl benzene sulfonic acid (PXSA), 4-hydroxy-m-benzene disulfonic acid (PDSA), 3-chloro-4-hydroxybenzene sulfonic acid (OCPSA) were studied as a function of weight of the dopant compounds. It is noted that an increase of the conductance of poly aniline by doping with OCPSA, and became equal to 0.001321 Ω^?1 for 1 g higher than the conductance for the poly aniline when it is doped with OCPSA.     

Organosilanols as catalysts in asymmetric aryl transfer reactions

[reaction: see text] Various ferrocene-based organosilanols have been synthesized in four steps starting from achiral ferrocene carboxylic acid. Applying these novel planar-chiral ferrocenes as catalysts in asymmetric phenyl transfer reactions to substituted benzaldehydes afforded products with high enantiomeric excesses. The best result (91% ee) was achieved in the addition to p-chlorobenzaldehyde with organosilanol 2b, which has a tert-butyl substituent on the oxazoline ring and an isopropyl group on the silanol fragment.