Thermal conductivity modeling of nanofluids with ZnO particles by using approaches based on artificial neural network and MARS

Journal of Thermal Analysis and Calorimetry - Nanofluids are attractive alternatives for the current heat transfer fluids due to their remarkably higher thermal conductivity which leads to the...     

Optimization of operating parameters and rate of uranium bioleaching from a low-grade ore

In this study the bioleaching of a low-grade uranium ore containing 480 ppm uranium has been reported. The studies involved extraction of uranium using Acidithiobacillus ferrooxidans derived from the uranium mine samples. The maximum specific growth rate (µ ^max) and doubling time (t _d) were obtained 0.08 h^?1 and 8.66 h, respectively. Parameters such as Fe²⁺ concentration, particle size, temperature and pH were optimized. The effect of pulp density (PD) was also studied. Maximum uranium bio-dissolution of 100 ± 5 % was achieved under the conditions of pH 2.0, 5 % PD and 35 °C in 48 h with the particles of d ₈₀ = 100 μm. The optimum concentration of supplementary Fe²⁺ was dependent to the PD. This value was 0 and 10 g of FeSO₄·7H₂O/l at the PD of 5 and 15 %, respectively. The effects of time, pH and PD on the bioleaching process were studied using central composite design. New rate equation was improved for the uranium leaching rate. The rate of leaching is controlled with the concentrations of ferric and ferrous ions in solution. This study shows that uranium bioleaching may be an important process for the Saghand U mine at Yazd (Iran).     

Applications of intelligent methods in various types of heat exchangers: a review

Journal of Thermal Analysis and Calorimetry - Heat exchangers are applicable in different industries and technologies, and their performance is influenced by different parameters. In addition to...     

Effects of poly(ethylene glycol) on the morphology and properties of biocomposites based on polylactide and cellulose nanofibers

Polylactide (PLA)/cellulose nanofiber (CNF) biocomposites were prepared via solution casting and direct melt mixing. To improve the compatibility, a masterbatch of CNFs and poly(ethylene glycol) (PEG) (1:2) was also prepared. The effects of PEG on the morphology and properties of the biocomposites were investigated. The dispersion/distribution of nanofibers in PLA was improved when the masterbatch was used and the composites were prepared in solution. Substantial effects on the rheological properties of solution-prepared PLA/CNF/PEG composites were observed compared to composites containing no PEG, whereas for melt-prepared composites no significant changes were detected. Increased crystalline content and crystallization temperature were observed for the composites prepared via the masterbatch and solvent casting. The storage modulus of PLA was increased by 42 and 553% at 25 and at 80 °C, respectively, for the solution-based PEG-compatibilized composite containing 2 wt% nanofibers. Also, a better light transmittance was measured for the PLA/CNF/PEG composites prepared in solution.     

A review on the properties,preparation, models and stability of hybrid nanofluids to optimize energy consumption

Journal of Thermal Analysis and Calorimetry - These days, the importance of energy consumption has led scientists to optimize thermal devices. One of the solutions proposed for this purpose is...     

High-performance computing and machine learning applied in thermal systems analysis

Journal of Thermal Analysis and Calorimetry -     

Recent Advances in Heat and Mass Transfer

Journal of Thermal Analysis and Calorimetry -     

A review on heat transfer characteristics of cryogenic heat pipes

Journal of Thermal Analysis and Calorimetry - Heat pipes are broadly applied for thermal management of devices with high heat flux. Due to the dependency of their efficient operating range on the...     

Forced convection heat transfer of nanofluids from a horizontal plate with convective boundary condition and a line heat source embedded in porous media

Journal of Thermal Analysis and Calorimetry - In this study, forced convective flow of nanofluids over a horizontal flat plate with convective boundary condition and a heated line source which are...