Polyaniline-coated microtiter plates for use in longwave optical bioassays

A technique for coating the wells of microtiter-plates with polyaniline layers and with polyaniline/enzyme layers is presented. The resulting wells are shown to be useful for assaying enzyme substrates (as exemplified for glucose via pH) and hydrogen peroxide (via the redox properties of the film). Analyte detection is based on monitoring the absorption spectra of the polyaniline, which turn purple as a result of redox processes, or green on formation of acids by enzymatic reactions. Hydrogen peroxide (a species produced by all oxidases) and glucose (which yields protons on enzymatic oxidation) have been determined in the millimolar to micromolar concentration range. High sensitivity, film stability and good reproducibility of the measurements make the system an attractive alternative to existing biosensing schemes.     

Towards the development of multisensor for drugs of abuse based on molecular imprinted polymers

The synthetic receptors for cocaine, deoxyephedrine, methadone and morphine were computationally designed and produced using molecular imprinting. The structure and energy of the molecular complexes were analysed by computational techniques. The possible structures of the binding sites in the synthetic receptors have been compared with those of corresponding natural receptors. The composition of imprinted polymers was optimised to allow adequate performance under the same experimental conditions. All selected molecular imprinting polymers (MIPs) demonstrated stronger affinity in comparison with corresponding blank polymers resulting in imprinted factors (I) equal to 1.2 (cocaine), 2.5 (deoxyephedrine), 3.5 (methadone) and 3 (morphine) which suggested that the specific binding site for each molecule was successfully created. The polymers studied possessed good selectivity and affinity towards their templates and could be recommended for the integration with sensor devices. From a practical point of view, especially for multisensor requirements, the synthetic receptors based on imprinted polymers could be superior to natural receptors due to their stability, robustness and compatibility with automation processes required for sensor fabrication.     

A comparative investigation of the fatty acid compositions of the seeds of a number of lines of a genetic collection of Gossypium hirsutum

A comparative analysis has been made of the amounts of lipids and their fatty-acid compositions in the seeds of the lines of agenetic collection of cotton plants of the speciesGossypium hirsutum and their hybrids and the variety Tashkent-1. The results obtained on the fatty-acid compositions of some hybrids make it possible to recommend the use of individual lines of cotton plants as donors for improving the food-value indices of cottonseed oil.Institute of Chemsitry of Plant Substances, Academy of Sciences of the Uzbek SSR, Tashkent. V. I. Lenin Tashkent State University. Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 173–176, March–April, 1991.     

High molecular recognition: design of "Keys"

Molecular recognition between molecules is one of the most fundamental processes in biology and chemistry. The recognition process is largely driven by non-covalent forces such as hydrogen bonding, electrostatics, van der Waals forces, pi-pi interactions, and conformational energy. The complementarity between the receptor and substrate is very similar to the "lock and key" function, first described by Emil Fischer over 100 years ago, - the lock being the molecular receptor such as a protein or enzyme and the key being the substrate such as a drug, that is recognized to give a defined receptor-substrate complex. This review focuses on the design of specific ligand systems as "Keys" to enable the induced fit of these keys into the target macromolecules, protein/enzyme (Locks) with particular emphasis on protein recognition.     

多功能两亲梳状聚合物的合成及包覆荧光量子点

利用溶液聚合和成酰胺反应合成了多功能梳状两亲性共聚物,聚(甲基丙烯酸-co-甲基丙烯酸十八酯)-(乙醇胺-乙二胺叶酸)(PSM-EE-FA).用红外光谱(FTIR),核磁共振(1H-NMR)及凝胶渗透色谱(GPC)表征了该聚合物的结构及分子量分布.实验结果证明合成了该聚合物,其数均分子量(Mn)为28600,多分散性为1.375.用该两亲梳状聚合物包覆油溶性CdSe/ZnS量子点,通过相转移作用,得到水溶性靶向量子点(PSM-EE-FA-QDs).该水溶性量子点溶液具有较好的稳定性.通过紫外-可见(UV-Vis)及荧光发射光谱分析对该量子点的光学性质进行研究.结果表明,PSM-EE-FA-QDs的紫外-可见光谱及荧光发射光谱峰形与原量子点基本一致.由于量子点表面聚合物层的形成,峰位发生少量红移.该量子点水溶液的荧光强度是原量子点氯仿溶液的98%,荧光产率是原量子点氯仿溶液的95%.动态光散射(DLS)及透射电镜(TEM)测试结果表明水溶性量子点分布均匀.合成的水溶性量子点不但光学性能稳定,而且聚合物及水溶性量子点的合成方法较为简便.     

相对论性核碰撞中Φ介子产生和弦碎裂函数

用强子和弦级联模型LUCIAE系统研究从AGS到SPS,到RHIC,再到LHC能量核–核碰撞中Φ介子产生.采用与能量有关弦碎裂函数,并通过与荷电粒子多重数实验数据的比较确定其中的参数后,LUCIAE模型给出的Φ介子产额与实验数据也都相近,得到的事件平均弦碎裂变量随能量之增趋饱和规律,可能是核穿透性能量行为的定性表示.     

以LCD为目标的自动定焦判据选择

在光学综合自动测量中 ,使用液晶显示屏作为分划板可以大大简化结构 ,提高效率 ,真正地实现自动测量。由于液晶显示具有对比度低、噪声大等特点 ,所以根据液晶的这些特点以及图像处理和CCD信号接收的特点选择两种适用的判据进行了分析和试验比较 ,并给出了结果。结果表明 ,这两种判别函数都适用于以液晶显示屏为目标和用图像处理方法进行光学参数测量的系统 ,其中锐度判别函数更优于信息熵判别函数 ,前者具有更好的抗干扰性和稳定性 ,而且其判定结果更接近目视清晰度判别     

Revêtements modérés et groupe fondamenttal de graphe de groupes

Let R be a discrete complete valuation ring, with algebraically closedresidue field. Let X be a semi-stable R-curve, with smooth generic fibre. In this paper we study tame coverings of X.     

相对论性核碰撞中φ介子增强

用强子和弦级联模型LUCIAE系统地研究了相对论性p+p和Pb+Pb碰撞中φ介子产生.在模型框架内实验测得的158AGeV/cPb+Pb碰撞中φ介子产额相对于同能量p+p碰撞的增强现象,依赖于弦发射胶子的集体效应和奇异夸克压低约化两机制,在一定程度内能得到解释.