High-throughput characterization of local conductivity of Nd0.9Ca0.1Ba2Cu3O7−δ thin film by the low-temperature scanning microwave microscope

We developed a scanning microwave microscope (SμM) designed for high-throughput electric-property screening as well as for rapid construction of electronic phase diagrams at low temperatures. As a sensor probe, we used a high-Qλ/4 coaxial cavity resonator to which a thin needle with ball-tip end was attached. The sensor module was mounted on the low-temperature XYZ stage, which allowed us to map out the change of resonance frequency and quality factor due to the local tip-sample interaction at low temperatures. From the measurements of combinatorial thin films, such as Ti_1−xCo_xO_2−δ and Nd_0.9Ca_0.1Ba₂Cu₃O_7−δ (NCBCO), it was demonstrated that this SμM system has enough performance for the high-throughput characterization of sample conductance under variable temperature conditions.     

Synthesis of silicon nitride based ceramic nanoparticles by the pyrolysis of silazane block copolymer micelles

Diblock copolymer poly(1,1,3,N,N′‐pentamethyl‐3‐vinylcyclodisilazane)‐block‐polystyrene (polyVSA‐b‐polySt) and triblock copolymer poly(1,1,3,N,N′‐pentamethyl‐3‐vinylcyclodisilazane)‐block‐polystyrene‐block‐poly(1,1,3,N,N′‐pentamethyl‐3‐vinylcyclodisilazane) (polyVSA‐b‐polySt‐b‐polyVSA), consisting of silazane and nonsilazane segments, were prepared by the living anionic polymerization of 1,1,3,N,N′‐pentamethyl‐3‐vinylcyclodisilazane and styrene. PolyVSA‐b‐polySt formed micelles having a poly(1,1,3,N,N′‐pentamethyl‐3‐vinylcyclodisilazane) (polyVSA) core in N,N‐dimethylformamide, whereas polyVSA‐b‐polySt and polyVSA‐b‐polySt‐b‐polyVSA formed micelles having a polyVSA shell in n‐heptane. The micelles with a polyVSA core were core‐crosslinked by UV irradiation in the presence of diethoxyacetophenone as a photosensitizer, and the micelles with a polyVSA shell were shell‐crosslinked by UV irradiation in the presence of diethoxyacetophenone and 1,6‐hexanedithiol. These crosslinked micelles were pyrolyzed at 600 °C in N₂ to give spherical ceramic particles. The pyrolysis process was examined by thermogravimetry and thermogravimetry/mass spectrometry. The morphologies of the particles were analyzed by atomic force microscopy and transmission electron microscopy. The chemical composition of the pyrolysis products was analyzed by X‐ray fluorescence spectroscopy and Raman scattering spectroscopy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4696–4707, 2006     

Investigation of the drying conditions for amidosulfuric acid.

The drying conditions for primary standards of volumetric analysis have a significant effect on the titration results due to changes in the purity, stability and homogeneity. Amidosulfuric acid, a strong acid used as a reference material for volumetric analysis in Japan, was dried in a vacuum desiccator or heated at different temperatures, and then measured by Karl-Fischer titration, thermogravimetry/mass spectroscopy (TG-MS), ion chromatography and coulometric titration. The optimum drying conditions were at 50 degrees C for 24 h with crushing.     

Effective Hamiltonian method for environmental effects

Some novel physical ideas and mathematical techniques are described, useful in the development of effective Hamiltonian methods for studying molecular environmental effects.     

Development of dynamic compartment model for prediction of behavior of radioiodine in rice paddy field

For the assessment of a public impact caused by radionuclides released from nuclear facilities, a dynamic compartment model was developed for prediction of behavior of radioiodine in air, paddy field and rice plant system. The transfer coefficients among compartments were determined by some experimental data and assumptions for each chemical form of iodine. A verification of the model was carried out by some case studies.     

Structure of Sol-Gel-Derived Sodium Dititanate Glass

The sodium dititanate, Na₂O·2TiO₂ glass was prepared by the sol-gel method. The structure of the glass, especially local environment of Ti⁴⁺ ions was examined using X-ray diffraction and X-ray absorption fine structure (XAFS) analyses, and was compared with that of the melt-derived glass with the same composition. It was found that Ti⁴⁺ ions are rather in five-fold coordination state, forming TiO₅ pyramids with one doubly bonded Ti=O in the gel-glass, while they were in lower coordination state or four-fold coordination in the melt-derived glass.     

Inhibitory effects of 3-O-acyl-(+)-catechins on Epstein-Barr virus activation

In the course of an exploratory investigation of antitumor-promoting catechins, 3-O-acyl-(+)-catechins of varying carbon lengths from C(4) to C(18) were assessed for inhibitory effects on the activation of the Epstein-Barr virus early antigen. Like 3-O-acyl-(-)-epigallocatechins, the (+)-catechin derivatives showed promising effects with the C-3 acyl chain of C(8)-C(11) carbon atoms.     

Property of TS-16N solid state nuclear track detectors as an imaging medium for macroautoradiography of alpha-emitters in biological specimens

Feasibility of TS-16N solid state nuclear track detectors for an imaging medium of rapid autoradiography of alpha-emitters is described. Though a little longer etching time was required, the contrast of autoradiographic image on this detector proved to be superior to CR-39 detectors whose property for macroautoradiography was previously reported by the authors. The resolutions of these two different type detectors were almost equivalent to each other. The autoradiography taken by way of trial proved that this detector could be used to study metabolism and dosimetry of internally deposited alpha-emitters. With further study, the inherent properties of this detector such as low background or high sensitivity should extend the field of track etch imaging technique such as fast neutron radiography.     

Amphotericin B covalent dimers forming sterol-dependent ion-permeable membrane channels

Polyenemacrolides such as amphotericin B (AmB) were thought to assemble together and form an ion channel across plasma membranes. Their antimicrobial activity has been accounted for by this assemblage, whose stability and activity are dependent on sterol constituents of lipid bilayer membranes. The structure of this channel-like assemblage formed in biomembranes has been a target of extensive investigations for a long time. For the first step to this goal, we prepared several AmB dimers with various linkers and tested for their channel-forming activity. Among these, AmB dimers that bore an aminoalkyl-dicarboxylate tether covalently linked between amino groups of AmB showed potent hemolytic activity. Furthermore, K+ influx actions monitored by measuring the pH of the liposome lumen by 31P NMR revealed that the dimers formed the molecular assemblage similar to that of AmB in phospholipid membrane. Judging from changes in 31P NMR spectra, the dimers appeared to induce "all-or-none"-type ion flux across the liposome membrane in the presence of ergosterol, which suggested that the ion channel formed by ergosterol/dimer is similar to that of AmB. With these data in hand, we are now trying to elucidate the structure of the ion-channel complex by making the labeled conjugates of AmB for NMR measurements.