Extension to R + n+1 of singular integrals and fractional integrals

In this paper, a natural R ₊ ⁿ⁺¹ extension of singular integrals, i.e.,T _κ:f→K*φ _t *t with K a standard C-Z kernel and ϕ usual one, is investigated. One of the main results is: Let (dμ, udx) ∈C₁ and u-Mw, w∈A_∞, then T_k is of type (L^p(udx), L^p(dμ)). As a related topic, a maximal operator is proved to be of type , where , provided (dμ, udx) ∈C₁ and u∈ A_∞. Supported by National Science Foundation of China     

298.1 K时脂肪酸钠盐对定组成水溶液中非水组分活度系数的影响

本文报告了298.1 K下甲酸钠(C_1), 乙酸钠(C_2)、丙酸钠(C_3)、丁酸钠(C_4)、戊酸钠(C_5)、已酸钠(C_6)和庚酸钠(C_7)七个盐对水溶液中乙醇、丙酮和乙腈三个溶质的活度系数的影响。实验方法是, 固定水溶液中乙醇、丙酮和乙腈的浓度(摩尔分数约为0.05), 用气相色谱法检测不同盐浓度下平衡气相中溶质分压的变化, 从而得出溶质的盐效应活度系数γ。本文给出了一个可以连续取样的气液平衡装置的设计。由实验结果可见, 不同碳链大小的脂肪酸根离子的盐效应作用差别很大。C_1、C_2的盐效应主要由于静电作用; 对C_3、C_4盐, 除静电作用外,它们的疏水基与溶质疏水基的相互作用对盐效应有显著影响; C_5、C_6和C_7的盐效应则反映了疏水离子的特色, 疏水水化、疏水相互作用、疏水离子形成的聚集体与不同官能团的特定相互作用等几项因素, 导致儿个溶质盐效应的差异。     

微波－气相－热压法分解高纯铂的研究

本文研究了微波气相热压法新技术分解高纯铂在密闭的聚四氟乙烯高压罐中，以微波瞬间加热混合酸产生的高压、纯净蒸气分解金属铂，此法避免了酸中杂质的沾污以制备供高纯铂分析的试液，提高了痕量杂质分析的准确度和降低检测限     

Anti-bacterial effect of four extracts from leaves of Dracontomelon dao on Escherichia coli growth using microcalorimetry coupled with principal component analysis

The anti-Escherichia coli activities of four extracts in leaves of Dracontomelon dao, a traditional folk herb in China were investigated and compared by microcalorimetry. The four extracts are PE fraction, CHCl₃ fraction, EtOAc fraction, and n-BuOH fraction. The heat flow power–time (HFP–time) curves of E. coli growth in the presence of the four extracts were measured using an ampoule method. Then the nine thermal kinetic parameters were obtained from the curves. From the result of principal component analysis, it can be seen that parameters k ₁, k ₂, P ₁, and Q _p2 might be the main parameters in evaluating the anti-E. coli effects. In the presence of CHCl₃ fraction, EtOAc fraction, and n-BuOH fraction, k ₂, Q _p2 of E. coli decreased with increasing concentrations of the extracts. The EtOAc fraction was observed to have the strongest anti-bacterial activity with half-inhibitory concentration IC50 of 98.5 μg mL^?1. So, it can be concluded that EtOAc fraction can be further developed as anti-bacterial bioactive fraction of leaves of Dracontomelon dao.     

Fluorescence Signal Amplification Strategies Based on DNA Nanotechnology for miRNA Detection

In this review,the most recent progresses in the field of fluorescence signal amplification strategies based on DNA nanotechnology for miRNA are summarized.The types of signal amplification are given and the principles of amplification strategies are explained,including rolling circle amplification(RCA),catalytic hairpin assembly(CHA),hybridization chain reaction(HCR)and DNA walker.Subsequently,the application of these signal amplification methods in biosensing and bioimaging are covered and described.Finally,the challenges and the outlook of fluorescence signal amplification methods for miRNA detection are briefly commented.     

The complexation of apo-metallothionein with cadmium ion and its conformation study

The circular dichroism was used to study the complexation of two isoforms of rabbit liver apo-metallothioneins (apo-MT1 and apo-MT2) with Cd²⁺ ion and the influence of Cd²⁺ ion on the conformation of reconstituted MTs. The stability of sulfhydryls of apo-MT has been investigated at the room temperature in the presence of air. The reconstitutions of apo-MT1 with Cd²⁺ ion were carried out atpH 4.71 (stable state) andpH 7.9 (with 90% sulfhydryls oxidated) respectively. it was found that the characteristic CD band at 257 nm(+), 238 nm(?), 226 nm(+) of reconstituted MT with Cd²⁺ ion was the same as native MT atpH 4.71, however only one peak at 243 nm(+) appeared on the CD spectra atpH 7.9 which arose from mononuclear complexes with four separated thiolate ligands per Cd²⁺ ion. The CD spectra of apo-MTs+7 eq Cd²⁺ system were measured at variouspH values. It was found that the peak at 256 nm of apo-MT1 binding Cd²⁺ ion split into two small peaks atpH between 2.42 and 3.02, and became one peak atpH 3.32, while the shapes of Cd peaks of apo-MT2 binding Cd²⁺ ion did not change withpH, indicating that the binding sites and pathway of apo-MT1 binding Cd²⁺ ion were different from those of apo-MT2. A possible mechanism was suggested.     

高比能锂离子电池层状富锂正极材料改性策略研究进展

层状富锂材料具有超过250 mAh∙g⁻¹的高可逆比容量,被认为是下一代高比能锂离子电池最具商业化前景的正极材料之一。然而,层状富锂材料在实际应用之前仍需解决诸多挑战,如高电压氧释放、层状到岩盐相的结构变化、过渡金属离子迁移等结构劣化,并由此带来了较低的初始库伦效率、电压/容量的衰减以及循环寿命的不足。针对以上问题,进行层状富锂材料改性无疑是一种行之有效的方法。本综述全面介绍了层状富锂材料的结构、组分以及电化学性能,在此基础上对材料改性策略进行了系统阐述,详细介绍了体相掺杂、表面包覆、缺陷设计、离子交换和微结构调控等一系列改性策略的现状以及发展趋势,最终提出了高容量和长循环层状富锂材料和高比能锂离子电池的设计思路。     

Preparative separation of anti‐oxidative constituents from Rubia cordifolia by column‐switching counter‐current chromatography

An effective column‐switching counter‐current chromatography (CCC) protocol combining stepwise elution mode was successfully developed for simultaneous and preparative separation of anti‐oxidative components from ethyl acetate extract of traditional Chinese herbal medicine Rubia cordifolia. The column‐switching CCC system was interfaced by a commercial low‐pressure six‐port switching valve equipped with a sample loop, allowing large volume introduction from the first dimension (1^st‐D) to the second dimension (2^nd‐D). Moreover, to extend the polarity window, three biphasic liquid systems composed of n‐hexane/ethyl acetate/methanol/water (1:2:1:2, 2:3:2:3, 5:6:5:6 v/v) were employed using stepwise elution mode in the 1^st‐D. By valve switching technique the whole interested region of 1^st‐D could be introduced to second dimension for further separation with the solvent system 5:5:4:6 v/v. Using the present column‐switching CCC protocol, 500 mg of crude R. cordifolia extract were separated, producing milligram‐amounts of four anti‐oxidative components over 90% pure. Structures of purified compounds were identified by ¹H and ¹³C NMR.     

Data fusion in multivariate calibration transfer

We report the use of stacked partial least-squares regression and stacked dual-domain regression analysis with four commonly used techniques for calibration transfer to improve predictive performance from transferred multivariate calibration models. The predictive performance from three conventional calibration transfer methods, piecewise direct standardization (PDS), orthogonal signal correction (OSC) and model updating (MUP), requiring standards measured on both instruments, was significantly improved from data fusion either by stacking of wavelet scales or by stacking of spectral intervals, as demonstrated by transfer of calibrations developed on near-infrared spectra of synthetic gasoline. Stacking did not produce as significant an improvement for calibration transfer using a finite impulse response (FIR) filter, but application of SPLS regression to FIR-transferred spectra improves predictive performance of the transferred model.