Rheology,morphology, and estimation of the interfacial tension of binary blends based on low‐density polyethylene/poly(trimethylene terephthalate) and high‐density polyethylene/poly(trimethylene terephthalate) [retracted article]

It has come to our attention that this article, “Rheology, Morphology, and Estimation of the Interfacial Tension of Binary Blends Based on Low‐Density Polyethylene/Poly(trimethylene terephthalate) and High‐Density Polyethylene/Poly(trimethylene terephthalate)” by A. A. Shokri and S. E. Zamani was previously published under the title, “Rheology, Morphology and Estimation of Interfacial Tension of LDPE/EVA and HDPE/EVA Blends” by H. A. Khonakdar, S. H. Jafari, A. Yavari, A. Asadinezhad, U. Wagenknecht, in Polymer Bulletin 54, 75–84 (2005), . We have retracted the article, and offer our apologies to the authors of the original paper.     

Copper(I) complex covalently anchored on graphene oxide as an efficient and recyclable catalyst for Sonogashira reaction

In this study, the organosilane‐functionalized graphene oxide as a stabilizer was prepared by a facile one‐step silylation approach. [Cu(PPh₃)₃Cl] complex was successfully immobilized onto the graphene oxide surface through coordination interaction with organosilane ligand spacers. The supported catalyst showed enhanced catalytic performance toward Sonogashira reaction of aryl halides with phenylacetylene in water solvent compared with the homogeneous analogues, and it could be readily recycled and reused several times without discernible loss of its activity.     

The Processing of Pyrolysis Fuel Oil by Dielectric Barrier Discharge Plasma Torch

In present paper, an atmospheric-pressure low-temperature plasma treatment of pyrolysis fuel oil (PFO) was investigated in dielectric barrier discharge plasma torch reactor. The effect of the applied voltage and the volume of feedstock, as the main parameters, on the cracking of PFO were studied. By increasing the applied voltage from 10 to 16 kV, the production rate of hydrocarbons containing methane, ethylene, acetylene, propane, propylene, and C₄ rise 18 times. In this case, the production rate of hydrogen increases by approximately 14 times and reaches 7.27 × 10^?3 mol/min for 16 kV. In the feedstock volume investigation, based on limitation of reactor volume, the production rate of hydrocarbons decreased from 0.44 × 10^?3 to 0.15 × 10^?3 mol/min by increasing volume of feedstock from 1 to 5 cc.     

Electroluminescence and Photoluminescence of Conjugated Polymer Films Prepared by Plasma Enhanced Chemical Vapor Deposition of Naphthalene

Polymer light-emitting devices were fabricated utilizing plasma polymerized thin films as emissive layers. These conjugated polymer films were prepared by RF plasma enhanced chemical vapor deposition using naphthalene as monomer. The effect of different applied powers on the chemical structure and optical properties of the conjugated polymers was investigated. Fourier transform infrared (FTIR) and Raman spectroscopies confirmed that a conjugated polymer film with a 3-D cross-linked network was developed. By increasing the power, products tended to form as highly cross-linked polymer films. The fabricated devices showed broadband Electroluminescence (EL) emission peaks with center at 535–550 nm. Photoluminescence (PL) spectra of plasma polymers showed different excimeric emissions, resulted from crosslinked architecture. As the plasma power increased, the optical properties showed two different domains; up to 200 W, EL, PL and UV–Vis spectra red-shifted and broadened significantly. At higher powers, a reverse behavior was observed. Also, the relation between the film structure and plasma species was investigated using optical emission spectroscopy.     

Stability, rheological, magnetorheological and volumetric characterizations of polymer based magnetic nanofluids

The Fe₃O₄ nanoparticles and Fe₃O₄ nanoparticles coated with oleic acid have been dispersed in base fluid of poly(ethylene glycol) (PEG). Stability and particle size distribution of these nanofluids have been studied by result analysis of UV–Vis spectroscopy, zeta potential and dynamic light scattering. Blue shift of UV–Vis spectra has been related to quantum effects such as band gap enlargement with particle size decreasing and also to effect of oleic acid on the ultraviolet wavelength. Flow behavior and suspension structure of Fe₃O₄ nanoparticles dispersed in PEG have been determined by rheological properties. Viscosity values of Fe₃O₄-PEG nanofluid as a function of temperature have also been investigated. The chain-like structure of Fe₃O₄ nanoparticles coated with oleic acid in base fluid of PEG has been verified by measuring the magnetorheological properties. The effect of temperature on magnetorheological properties of Fe₃O₄ nanoparticles coated with oleic acid has also been investigated in base fluid of PEG. The volumetric properties of Fe₃O₄-PEG and Fe₃O₄ coated with oleic acid–PEG nanofluids and PEG–oleic acid solution have also been measured at different temperatures to specify the suspension structure and also interactions of Fe₃O₄, PEG and oleic acid molecules.     

A Review in Linear Alkylbenzene (LAB) Production Processes in the Petrochemical Industry

Russian Journal of Applied Chemistry - Linear alkylbenzene (LAB) is a cost-effective and biodegradable intermediate in the production of detergents and surfactants. Recently, due to the spread of...     

Synthesis, Characterization, Spectroscopy and Study of Antimicrobial Properties of Two New Substituted Trichloroaluminate（Ⅲ） Complexes [AlCl3X]- （X = SCN-, CN-）

The synthesis and characterization of two new aluminate(Ⅲ) complexes with general formula K[AlCl3X] are reported. These compounds derived from aluminate trichloride and related salts. Potassium trichlorothiocyanoaluminate, PCTA, and potassium trichlorocyanatoalu-minate, PCCA, are two new ionic aluminate complexes. They can be easily synthesized in a nearly quantitative yield by using the direct reaction of AlCl3 and KX. The complexes were characterized by physico-chemical and spectroscopic methods. Theoretical calculations have been used for the extraction of structural and spectroscopic data of these new synthesized complexes. The antibacterial activities of such compounds were studied against the Staphylococcus aureus, Escherichia coli, Staphylococcus Epidermidis, Estreptococo B and Shigella.     

Adsorption sensitivity of pristine and Al- or Si-doped boron nitride nanoflake to COCl2: a DFT study

ABSTRACT

The adsorption of phosgene (COCl₂) on pristine, Al- and Si-doped boron nitride nanoflakes (BNNFs) is studied using density functional theory calculations. The adsorption energies of the most stable complexes, formed from interaction between COCl₂ and the pristine, Al- and Si-doped BNNFs are ?28.97, ?78.71 and ?171.60?kJ/mol at the M06-2X/6-31?+?G* level of theory, respectively. It is found that COCl₂ experiences a chemisorption interaction over the doped BNNFs, significantly altering its structure with respect to the gas-phase molecule. The COCl₂ adsorption can also induce a change in the HOMO–LUMO or SOMO–LUMO energy gap of the surface. In particular, the adsorption of COCl₂ is found to decrease the HOMO–LUMO energy gap of Al-doped BNNF by about 30%. It is suggested that the Al- or Si-doped BNNFs can be considered as a potential material for detecting toxic COCl₂.     

Comparison of the role of new ethers and conventional alkoxysilanes as external donors in the polymerization of propylene using the industrial Ziegler-Natta catalyst

Two new ethers were synthesized using the Williamson reaction from related alcohols and were used as external donors in propylene polymerization in the presence of the industrial diisobutyl phthalate-based MgCl₂-supported Ziegler-Natta catalyst. For comparison the propylene polymerization was carried out in the presence of silane and in the absence of external donors. The produced polymers were characterized by differential scanning calorimetry, xylene extraction, melt flow index, scanning electron microscopy and gel permeation chromatography. The isotacticity, molecular weight and molecular weight distribution, melt flow index, crystallinity degree and thermal properties of polypropylenes were influenced by the type of external donors.     

Numerical modeling of slug flow initiation in a horizontal channels using a two-fluid model

This paper presents a methodology for modeling slug initiation and growth in horizontal ducts. Transient two-fluid equations are solved numerically using a class of high-resolution shock capturing methods. The advantage of this method is that slug formation and growth in a stratified regime can be calculated directly from the solutions to the flow field differential equations. In addition, by using high-resolution shock capturing methods that do not contain numerical diffusion, the discontinuity generated by slugging in the flow field can be modeled with good accuracy. The two-fluid model is shown to be well-posed mathematically only under certain conditions. Under these circumstances, the two-fluid model is capable of correctly predicting and modeling the flow physics. When ill-posed, an unbounded instability occurs in the flow field solution, and the instability amplitude increases exponentially with decreasing mesh sizes. This work shows that there are three zones associated with slug formation. In addition, long wavelength slugs are shown to initiate from short wavelength waves. These short waves are generated at the interface of the two phases by the Kelvin-Helmholtz hydrodynamic instability. The results obtained through numerical modeling show good agreement with experimental results.