Reaction of t-butoxy radicals with norbornadiene

95 percent of the reaction of t-butoxy radical with norbornadiene occurs by radical addition followed by rearrangement to nortricyclyl and 7-t-butoxynorbornenyl products; the remainder includes a novel radical rearrangement involving a 1,3-H shift and some radical abstraction observed for the first time.     

Living polymerization: Rationale for uniform terminology

Polymer chemistry textbooks (e.g., B. Vollmert, Polymer Chemistry, Springer‐Verlag: New York, 1973, p 37; G. Odian, Principles of Polymerization, 3rd ed., Wiley: New York, 1991, p 8; H. G. Elias, An Introduction to Polymer Science, VCH: Weinheim, 1997, p 51) classify polymerization reactions as chain, step, and living according to the dependence of their degree of polymerization (DP ) or molecular weight (M̄) on conversion. This article discusses the rationale for uniform terminology in living polymerization. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1706–1708, 2000     

RAFT Polymerization: Adding to the Picture

SUMMARY: Factors affecting the choice of RAFT agent [RSC(Z) = S] for a given polymerization are discussed. For polymerization of methyl methacrylate (MMA), tertiary cyanoalkyl trithiocarbonates provide very good control over molecular weight and distribution and polymerizations show little retardation. The secondary trithiocarbonate RAFT agents with R = CHPh(CN) also gives good control but an inhibition period attributed to slow reinitiation is manifest. Radical induced reduction with hypophosphite salts provides a clean and convenient process for removal of thiocarbonylthio end groups of RAFT-synthesized polymers. Two methods providing simultaneous control over stereochemistry and molecular weight distribution of chains formed by radical polymerization are reported. Polymerization of MMA in the presence of scandium triflate provides a more isotactic PMMA. A similar RAFT polymerization with trithiocarbonate RAFT agents also provides control and avoids issues of RAFT agent instability seen with dithiobenzoate RAFT agents in the presence of Lewis acids. RAFT polymerization of tetramethylammonium methacrylate at 45 °C provides a more syndiotactic PMMA of controlled molecular weight and distribution (after methylation; mm:mr:rr 2:21:77 compared to 3:35:62 when formed by bulk polymerization of MMA).     

Thermal decomposition mechanisms of tert-alkyl peroxypivalates studied by the nitroxide radical trapping technique

The thermolysis of a series of tert-alkyl peroxypivalates 1 in cumene has been investigated by using the nitroxide radical-trapping technique. tert-Alkoxyl radicals generated from the thermolysis underwent the unimolecular reactions, beta-scission, and 1,5-H shift, competing with hydrogen abstraction from cumene. The absolute rate constants for beta-scission of tert-alkoxyl radicals, which vary over 4 orders of magnitude, indicate the vastly different behavior of alkoxyl radicals. However, the radical generation efficiencies of 1 varied only slightly, from 53 (R = Me) to 63% (R = Bu(t)()), supporting a mechanism involving concerted two-bond scission within the solvent cage to generate the tert-butyl radical, CO(2), and an alkoxyl radical. The thermolysis rate constants of tert-alkyl peroxypivalates 1 were influenced by both inductive and steric effects [Taft-Ingold equation, log(rel k(d)) = (0.97 +/- 0. 14)Sigmasigma - (0.31 +/- 0.04)SigmaE(s)(c), was obtained].     

Chain transfer by radical addition-fragmentation mechanisms: Synthesis of macromonomers and end-functional oligomers

Appropriately substituted allylic sulfides, sulfones, bromides, phosphonates, stannanes and peroxides, vinyl ethers and thionocarbonyl compounds are effective chain transfer agents in free radical polymerizations. These compounds function by a radical addition-fragmentation mechanism by which fragments derived from the chain transfer agents are installed at both ends of polymer chains. This provides a convenient method for preparing both mono- and di-end functional oligomers and polymers. Allylic peroxides fragment to give epoxy end groups while the other allylic compounds give rise to macromonomers by introducing terminal double bonds.     

Replacement of benzene with regulators for the catalyzed polymerization of 1,3‐butadiene to high cis‐1,4‐polybutadiene

The polymerization regulators mesitylene and 1,3,5‐trimethoxybenzene were investigated as suitable substitutes for benzene in the cobalt(II) octanoate/diethylaluminum chloride/water‐catalyzed polymerization of 1,3‐butadiene to high cis‐1,4‐polybutadiene. The propagation rates were reduced by 50% with the inclusion of 18 mM mesitylene or 0.17 mM trimethoxybenzene. Mesitylene was found to be an inefficient polymerization regulator because it reduced the propagation rate by a combination of regulation and destruction of the active catalyst complex. Not only did trimethoxybenzene reduce the propagation rate by effective regulation at low concentration, it also increased the percentage activity of cobalt to 200%, indicating that two polymer chains were propagating simultaneously from each active center. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2244–2255, 2001     

Donor–acceptor rod–coil block copolymers comprising poly[2,7‐(9,9‐dihexylfluorene)‐alt‐bithiophene] and fullerene as compatibilizers for organic photovoltaic devices

The successful synthesis is described for a donor–acceptor rod–coil block copolymer comprising blocks of poly[2,7‐(9,9‐dihexylfluorene)‐alt‐bithiophene] (F6T2) and polystyrene functionalized with fullerene (PS(C₆₀)) (F6T2‐b‐PS(C₆₀)). This new material was obtained by combining Suzuki polycondensation with radical addition fragmentation chain transfer. The block copolymer was characterized by nuclear magnetic resonance, gel permeation chromatography, and optical spectroscopy methods. Photophysical data for (F6T2‐b‐PS(C₆₀)) and a related block copolymer (F6T2‐b‐PS(PCBM)) (PCBM, phenyl‐C61‐butyric acid methyl ester) are reported and their performance as compatibilizers in bulk heterojunction organic solar cells is assessed. It is demonstrated that the addition of the rod–coil block copolymers to the active layer extends the operational stability of organic photovoltaic devices. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 888–903     

An Arm‐First Approach to Cleavable Mikto‐Arm Star Polymers by RAFT Polymerization

Redox‐cleavable mikto‐arm star polymers are prepared by an “arm‐first” approach involving copolymerization of a dimethacrylate mediated by a mixture of macroRAFT agents. Thus, RAFT copolymerization of the monomers BMA, DMAEMA, and OEGMA, with the disulfide dimethacrylate cross‐linker (DSDMA), bis(2‐methacryloyl)oxyethyl disulfide, mediated by a 1:1:1 mixture of three macroRAFT agents with markedly different properties [hydrophilic, poly[oligo(ethylene glycol) methacrylate]—P(OEGMA)_8–9; cationizable, poly[2‐(dimethylamino)ethyl methacrylate]—P(DMAEMA); hydrophobic, poly(n‐butyl methacrylate)—P(BMA)] provides low dispersity mikto‐arm star polymers. Good control (Đ < 1.3) is observed for the target P(DMAEMA)/P(OEGMA)/P(BMA) (3:3:1) mikto‐arm star, a double hydrophilic P(DMAEMA)/P(OEGMA) (3:3) mikto‐arm star and a hydrophobic P(BMA) homo‐arm star. However, Đ for the target mikto‐arm stars increases with an increase in either the ratio [DSDMA]:[total macroRAFT] or the fraction of hydrophobic P(BMA) macroRAFT agent. The quaternized mikto‐arm star in dilute aqueous solution shows a monomodal particle size distribution and an average size of ≈145 nm.