Optimum gas chromatographic conditions in wall-coated capillary columns. Extended and simplified forms of the Golay-equation

Band broadening in capillary columns is satisfactorily described by the Golay-equation extended to situations of appreciable pressure drop by Giddings. In practice, however, several simplifications are often made. The effect of these simplifications on the calculated values of the minimum plate height and optimum carrier gas velocity are treated systematically.     

The effects of the column pressure drop on retention and efficiency in packed and open tubular supercritical fluid chromatography

The effects of the pressure drop across the column on retention and efficiency in SFC have been studied. Numerical methods are described which enable the prediction of hold-up time and pressure drop in both packed and open tubular columns. Predictions of both hold-up time and pressure drop are in good agreement with experimental data. The density gradient along the column can be calculated using the numerical methods and a procedure is described which enables the calculation of the overall capacity factors of the solutes from the density profile in the column. Significant variations of the capacity factor are observed along the column. The effect of the density gradient along the column on local diffusivity and dispersion is studied. The column efficiency in systems with significant pressure drops is affected by changes in: the linear velocity of the mobile phase; the diffusion coefficients; and the capacity factors of the solutes along the column. The overall efficiency of the chromatographic system can be calculated if, as is the case for open tubular columns, adequate plate height equations are available.     

Activity testing and surface characterization of pretreated fused-silica capillaries for gas chromatography A new modification of existing intermediate column tests

A new modification of existing intermediate capillary column tests for uncoated columns is presented. A short (1 m), thick film (2 μm) precolumn is coupled to the column to be tested. The use of a short precolumn results in a rapid test. This makes it attractive in terms of time to inject the test compounds separately, thus excluding mutual influences, in diluted solutions spiked with n-alkanes as references. Moreover, the short precolumn gives sharp Gaussian injection profiles on the second column. A simple versatile coupling device has been developed, which permits easy control and adjustment of pressures and carrier flows, monitoring of the effluents of the precolumn and introduction of sharp input bands on the second column. The monitor detector accurately shows the shape and time of introduction of the compounds on the second column. This permits the evaluation of peak distortion, peak shift and yield on the second column. Test compounds were selected on the basis of their physico-chemical properties (vapour pressure, acid-base properties, dipole moments, hydrogen bonding, complexation with metals, etc.). A number of differently pretreated capillaries were tested with these compounds under various external conditions. Accurate quantification and qualification of the activity of the capillary present difficulties. The test is a case of nearly ideal non-linear chromatography. When peaks of different sizes are superimposed, the tails lie on a common envelope. The k′ of the end of the tail is fixed, irrespective of the amount injected, and forms an important parameter in the evaluation. Reconstruction of the chromatogram with a k′ scale instead of a time scale eliminates the influence of carrier velocity and column length. The method is a sensitive tool for intermediate column testing and shows promises for surface characterization.     

Supercritical fluid extraction-capillary gas chromatography: On-line coupling with a programmed temperature vaporizer

A simple and versatile system is described for the on-line coupling of SFE to capillary GC. The interfacing consists of a programmed temperature vaporizer (PTV) injector. With this injector it is possible to combine solute trapping, elimination of a high flow of extraction fluid, and quantitative transfer of solutes to the seperation column. The problems caused by impurities in the extraction fluid in on-line SFE-GC are discussed. Simple methods are described for the purification of commercially available carbon dioxide. The trapping efficiency of the PTV injector is studied. Applications of the SFE-PTV-GC system are given for the analysis of polymer anti-degradants, polar compounds, and samples with environmental relevance.     

Problems caused by the activity of Al2O3-PLOT columns in the capillary gas chromatographic analysis of volatile organic compounds

Summary Al₂O₃-PLOT columns are used with great advantage for the analysis of volatiles, because of the increased capacity ratio and selectivity compared to WCOT-columns. Their applicability is limited to relatively non-polar components with relatively low boiling points i. e. eluting before n-decane.In the analysis of the halocarbons in stratospheric air, the decomposition of certain compounds was observed. In this study the stability of a number of volatile organic compounds was determined in function dependence of the column temperature using a two-dimensional GC-system.A possible reaction mechanism for the decomposition is proposed and confirmed for several chlorinated ethanes.     

Increased speed of steroid analysis by capillary GC and GC-MS; effects of sample pretreatment and sample introdution

Quantitative analysis of steroids and their metabolites in urine samples calls for increased speed of sample clean-up, of the derivatization procedure, and of separation. A fast procedure for sample pretreatment, which can be performed within 8 hours, is introduced and evaluated. It is shown that use of fast pretreatment in combination with narrow bore columns, which are compatible with existing instrumentation, can considerably increase, laboratory throughput. The effect of different sample introduction techniques (e.g. splitless, on-column, and moving needle) on column efficiency and resolution is demonstrated and discussed.     

On-line combination of liquid chromatography and capillary gas chromatography. Preconcentration and analysis of organic compounds in aqueous samples

This paper describes the design of a new, versatile, and low-cost on-line LC-GC interface that allows the fast and reliable introduction of large sample volumes onto a capillary GC column. The sample introduction procedure consists successively of: evaporation of the entire sample (LC fraction), selective removal of the solvent and simultaneously cold-trapping of the solutes, splitless transfer of the solutes to the GC column, on-column focusing, GC separation and detection. Quantitative and qualitative aspects of various experimental parameters are evaluated and optimum conditions are reported. The applicability of the method is demonstrated on a synthetic aqueous sample of chlorinated pesticides.     

Temperature programmed retention indices: Calculation from isothermal data. Part 2: Results with nonpolar columns

The procedure for calculating linear temperature programmed indices as described in part 1 has been evaluated using five different nonpolar columns, with OV-1 as the stationary phase. For fourty-three different solutes covering five different classes of components, including n-alkanes and alkyl-aromatic compounds, both isothermal and temperature programmed indices were determined. The isothermal information was used to calculate temperature programmed indices. For several linear programmed conditions accuracies better than 0.51^T-units were usually obtained. The results are compared with published procedures. It is demonstrated that isothermal retention information obtained on one column can be transferred to another column with the same stationary phase but different column dimensions and/or phase ratio. The temperature programmed indices calculated in this way also have an accuracy better than 0.51^T-u. The temperature accuracy and precision of the GC-instrumentation used was of the order of 0.1°C. All calculations can be run with a Basic-programmed microcomputer.     

A continuous preconcentration/extraction method for organic trace analysis by capillary gas chromatography

Summary A slightly modified steam distillation-extraction device is described for the continuous extraction and preconcentration of organic traces in aqueous samples, prior to capillary G.C.-analysis. The quantitative performance, both theoretically and practically, is studied using phenols as the test substances. The final recovery is determined by the flow-ratio of the water and the extracting solvent and by the extraction coefficient. The process is found to be highly reproducible even at low concentration levels (ppb’s). Using 30 ml. samples with a concentration of 30 ppb (1:10^9), 100 % recoveries are obtained for the phenolic substances studied, with a relative standard deviation of about 3 %, both for methylene chloride and ethylacetate as the extracting solvents. Using methylene chloride as the extracting solvent, for phenol a maximum recovery of 80 % was obtained. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984