Cationic poly(methacryl oxyethyl trimethylammonium) and its poly(ethylene glycol)‐grafted analogue as capillary coating materials in electrophoresis

Cationic polyelectrolytes were synthesized and used as semipermanent coating materials for capillaries in electrophoresis. The polyelectrolytes used were a homopolymer of poly(methacryl oxyethyl trimethylammonium chloride) (PMOTAC) and its poly(ethylene glycol) (PEG)‐grafted analogue. Two PMOTAC polyelectrolytes, with molar masses of 85,000 and 300,000 g/mol, and PEG‐grafted PMOTAC with a molar mass of 280,000 g/mol were synthesized and then characterized by size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR) spectroscopy. Attachment of the polyelectrolytes to the wall of the fused silica capillary for electrophoresis caused the electroosmotic flow (EOF) to reverse. The polyelectrolyte coatings were tested over the pH range 2–11 at different buffer ionic strengths, and the most stable and strongest anodic EOFs were obtained at acidic pH values with low ionic strength buffers. Between runs the capillary is merely rinsed for 2 or 3 min with the background electrolyte solution. With the PMOTAC coatings at pH values ≤5, the RSDs of the EOFs were less than 2.9% after 60 injections. The effects of the molar mass of the polycation and of PEGylation of PMOTAC on the interactions between the polycations and basic proteins were studied at acidic pH values. The differences in the effective electrophoretic mobilities, resolution values, and plate numbers of the proteins with the different coatings were due to the EOF, as demonstrated through calculations of reduced mobilities, relative resolution values, and relative plate numbers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2655–2663, 2007     

Iodocyclization/base-induced hydrodeiodination reaction of 5-substituted 4-alkenols. The influence of substituent on the stereoselective pathway

The electrophilic iodocyclization reaction of (Z)- and (E)-5-n-alkylsubstituted 4-alken-1-ols followed by base-induced hydrodeiodination reaction stereoselectively gave, respectively, (Z)- and (E)-alkylidentetrahydrofurans in high yield. Completely different outcomes were observed with (Z)- and (E)-6,6-dimethylhept-4-en-1-ol: their iodocyclization furnished, respectively, threo- and erythro-2-(1-iodo-2,2-dimetylpropyl)tetrahydrofuran with high stereoselectivity. The threo isomer gave clean formation of 6-tert-butyl-3,4-dihydro-2H-pyran by base-induced ring expansion, while erythro isomer underwent a base-induced ring contraction to 1-cyclopropyl-3,3-dimethylbutan-1-one. Moreover, (Z)- and (E)-5-cyclopropylpent-4-en-1-ol underwent a 6-endo-iodocyclization to threo- and erythro-2-cyclopropyl-3-iodotetrahydro-2H-pyran, respectively, that under the same basic treatment, gave two isomeric 6-cyclopropyldihydro-2H-pyrans in a stereoselective fashion.     

A first theoretical study on the origin of the metal-mediated regioselective opening of 2,3-epoxy alcohols

Hybrid density functional theory (B3LYP) method allows the study of the role of metal ions (Li(+)) in the regioselective opening of 2,3-epoxy alcohols with lithium halides (Cl, Br, I) to the corresponding halohydrins. The theoretical results largely confirm the experimental results, especially with regards to the regioselectivity observed in the opening of the oxirane ring. The C3 halogen attack is always preferred to the C2 attack, with a significant difference in the TS structures with the reaction pathway under kinetic control. The central role of the lithium cation, linked to the oxygen atoms of the epoxy alcohol, is well documented in the reaction mechanisms presented. The energy differences between the two structures of the proposed TS appear to be ascribed to the different contribution of the X-H-O hydrogen bond between the hydroxyl groups of the reactant and the incoming halogen nucleophile.     

Dark Fermentative Hydrogen Production from Neutralized Acid Hydrolysates of Conifer Pulp

Concentrated acid hydrolysis of cellulosic material results in high dissolution yields. In this study, the neutralization step of concentrated acid hydrolysate of conifer pulp was optimized. Dry conifer pulp hydrolysis with 55?% H₂SO₄ at 45?°C for 2?h resulted in total sugar yields of 22.3?C26.2?g/L. The neutralization step was optimized for solid Ca(OH)₂, liquid Ca(OH)₂ or solid CaO, mixing time, and water supplementation. The highest hydrogen yield of 1.75?mol?H₂/mol glucose was obtained with liquid Ca(OH)₂, while the use of solid Ca(OH)₂ or CaO inhibited hydrogen fermentation. Liquid Ca(OH)₂ removed sulfate to below 30?mg SO₄ ^2?/L. Further optimization of the neutralization conditions resulted in the yield of 2.26?mol?H₂/mol glucose.     

Stereocontrolled Transformations of trans α,β‐Aziridine Aldehydes toward Different Amino Hydroxylated Structures

The stereocontrolled condensation of methyl ketones to trans α,β‐aziridine aldehydes creates functionalized aldols, valuable precursors for different amino hydroxylated structures, such as amino alcohols, amino diols, α‐tetrahydrofuryl amides, and α‐furyl amides.     

Influence of Ga/(Ga + In) grading on deep‐defect states of Cu(In,Ga)Se2 solar cells

The benefits of gallium (Ga) grading on Cu(In,Ga)Se₂ (CIGS) solar cell performance are demonstrated by comparing with ungraded CIGS cells. Using drive‐level capacitance profiling (DLCP) and admittance spectroscopy (AS) analyses, we show the influence of Ga grading on the spatial variation of deep defects, free‐carrier densities in the CIGS absorber, and their impact on the cell's open‐circuit voltage V_oc. The parameter most constraining the cell's V_oc is found to be the deep‐defect density close to the space charge region (SCR). In ungraded devices, high deep‐defect concentrations (4.2 × 10¹⁶cm^–3) were observed near the SCR, offering a source for Shockley–Read–Hall recombination, reducing the cell's V_oc. In graded devices, the deep‐defect densities near the SCR decreased by one order of magnitude (2.5 × 10¹⁵ cm^–3) for back surface graded devices, and almost two orders of magnitude (8.6 × 10¹⁴ cm^–3) for double surface graded devices, enhancing the cell's V_oc. In compositionally graded devices, the free‐carrier density in the absorber's bulk decreased in tandem with the ratio of gallium to gallium plus indium ratio GGI = Ga/(Ga + In), increasing the activation energy, hindering the ionization of the defect states at room temperature and enhancing their role as recombination centers within the energy band. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Carbon and nitrogen distribution in the sediments of lagoon of Ravenna (Italy)

The distribution and the origin of carbon and nitrogen in sediments of an Italian lagoon--located north-east of Ravenna town--were investigated. From 1957 to 1976, the lagoon had been affected by a strong industrial pollution due to an important petrochemical complex. At present, industrial and domestic waste waters undergo a treatment process before being discharged into the lagoon. Sediment samples from 10 locations throughout the lagoon were analysed, in order to document the spatial and vertical distribution of C and N. Data show a very strong variability (organic carbon content varies between 8.9% and 0.14%) and the highest values were found in the immediate vicinity of the industrial discharge. Sediment organic matter shows allochthonous origin in proximity of industrial discharge and autochthonous origin in the remaining areas.     

Domino processes as a tool for recovering substandard reactions. Synthesis and use of nitroacetic acid esters and amides

[reaction: see text] Elusive nitroacetic acid esters and amides were obtained through a halogen exchange reaction of the corresponding bromoacetic acid derivatives with polymer-supported nitrite anion. The process is flawed by a side product catalyzed degradation of the products. Domino processes turned out to be a powerful tool for overcoming such drawbacks, converting a substandard reaction into an efficient multicomponent preparation of 4-hydroxy-4,5-dihydroisoxazoles.     

Pentaerythrityltetramine scaffolds for solid-phase combinatorial chemistry

Straightforward synthesis for two pentaerythrityltetramine precursors, 2,2-bis(azidomethyl)propane-1,3-diamine (1) and 2-[N-(allyloxycarbonyl)aminomethyl]-2-azidomethylpropane-1,3-diamine (2), has been described. Both propane-1,3-diamines have been attached by reductive amination to a solid-supported backbone amide linker derived from 4-(4-formyl-3,5-dimethoxyphenoxy)butyric acid. The presence of the two methoxy substituents on the linker is essential to avoid cross-linking between two linkers. The remaining free primary amino group of the propane-1,3-diamine moiety may then be selectively acylated with an appropriately protected amino acid using conventional N,N-dicyclohexylcarbodiimide/1-hydroxybenzotriazole (DCC/HOBt) activation without any interference by the secondary amino function. The latter group may be subsequently acylated by an anhydride method. Sequential reduction of the azido group and removal of the allyloxycarbonyl protection from 2 allow further coupling of two different amino acids, and hence, this handle may be utilized in construction of branched structures containing four different amino acids or peptides. Solid-supported 1 may, in turn, be used for the synthesis of similar constructs containing two identical branches. It is worth noting that no acid-labile protecting groups are required in this approach, and hence, this dimension may be saved for the cleavage of the linker. The applicability of the scaffolds to library synthesis has been demonstrated by preparation of 11 pentaerythrityl-branched tetra- and octapeptides.