Study of the Capabilities of the ALICE inner tracking system stand-alone for HBT analysis

Results are shown from a Monte Carlo simulation study of the capabilities of the Inner Tracking System of the ALICE experiment, used in standalone mode, for HBT analysis of Pb?Pb collisions at LHC energies (5.5 ATeV). Different values of the coherence factor and the Gaussian source radius have been studied. For this purpose, a specific ITS stand-alone tracking algorithm, based on the Denby-Peterson neural algorithm, has been developed.     

Filiation structurale des phases de´rive´es de BaFeF5

Au sein d'un re´seau de type BaFeF₅ des chai?nes d'octae`dres fluore´sa`sommets communs peuvent disparai?tre en donnant naissance a des canaux dont l'occupation partielle ou totale par des files de cations Sr²⁺ et de couples d'anions F^?, conduit respectivement aux phases Sr₃(FeF₆)₂ ou Sr₅T₃F₁₉ (T = Cr, Co, Ga). Une discussion cristallochimique permet d'expliquer l'existence d'un domaine de solutions solides au sein du diagramme ternaire SrF₂BaF₂FeF₃.     

On finite {1,2,3}-semiaffine planes

In this paper, we investigate {1,2,3}-semiaffine planes. All such planes of order n >51 shall be classified. It turns out that they are embeddable into projective planes of the same order n in the most natural way.Work supported by National Research Project on Strutture Geometriche Combinatoria, loro applicazioni of Italian M.P.I. and G.N.S.A.G.A. of C.N.R.     

Own N-layered integrated molecular orbital and molecular mechanics study of the reaction of OH<Superscript>−</Superscript> with polychlorinated hydrocarbons CH<Subscript>(4−n)</Subscript>Cl<Subscript>n</Subscript> (n=2–4)

The reliability of the two-layer own N-layered integrated molecular orbital and molecular mechanics (ONIOM) method was examined for the S_N2 reaction CH_(4–n)Cl_n+OH^–. In the ONIOM calculation, only the methyl chloride and OH^–were treated at a high level and the effect of polychlorination was taken into account only at a low level. The ONIOM results were compared with the target CCSD(T)/aug-cc-pVDZ//MP2/aug-cc-pVDZ results obtained by Borisov etal. [(2001) J. Phys. Chem. A 105:7724]. The ONIOM[MP2/aug-cc-pVDZ:B3LYP/6-31+G(d)] was found to reproduce well the target geometry and energy at the MP2/aug-cc-pVDZ level. The single-point improved energetics at the ONIOM[CCSD(T)/aug-cc-pVDZ:MP2/6-31+G(d)] is found to give results nearly as accurate as the target CCSD(T)/aug-cc-pVDZ//MP2/aug-cc-pVDZ results. The substantially reduced cost, 20% for optimization and 5% for single-point improved energy of the target cost for n=4, as well as small errors suggest that ONIOM is a powerful tool for accurate potential-energy surfaces of the reaction of large polyhalohydrocarbons.     

A spectroscopic study of cobalt(III) furyldioximates

Summary The electronic properties of a series of cobalt(III)trans-furyldioximato-complexes of the type [CoB(FH)₂X] (B=NH₃, X=Cl, Br, I or NO₂; B=pyridine (py) or thiocarbamide (thio), X=Cl or Br; B=imidazole (imid), X=Br), [Co(FH₂)(FH)Cl₂] and [Co(thio)₂(FH)₂]NO₃ were studied by i.r., u.v. and¹H and¹³C n.m.r. spectra The results were compared with those from the corresponding dimethylglyoximato-complexes. It was concluded that -conjugation over the equatorial plane in the furyldioximates is greater than in the dimethylglyoximates. There is some evidence of thetrans-influence of the anionic ligands in the ammines which are in the order NO ₂ ^– >Br^–>Cl^–.     

Speciation analysis of chromium by separation on a 5-palmitoyl oxine-functionalized XAD-2 resin and spectrophotometric determination with diphenylcarbazide

The method developed in this work for the separation and preconcentration of Cr(III) is based on its retention by an Amberlite XAD-2 copolymer resin functionalized with 5-palmitoyl-8-hydroxyquinoline (oxine), abbreviated XAD-POx, with the ligand covalently bound to the copolymer. Cr(III) sorption was quantitative within the pH range 4.5–7.0 and Cr(VI) was not retained. The Cr(III) held by the resin column was eluted with a hot solution of H₂O₂ in pH9.0 aqueous NH₃–NH₄Cl buffer, and Cr oxidized to CrO₄^2– was rejected by the chelating cation-exchanger column. Any Cr(VI) originally present with Cr(III) could be reduced with an acidic solution of H₂O₂, and retained by the column yielding total Cr results, Cr(VI) being determined from the difference. The resin showed a maximal preconcentration factor of 60 for Cr(III), the LOD and LOQ being 9.3 and 30.1 nmol L^–1, respectively. The developed preconcentration-speciation analysis was finished with a diphenylcarbazide (DPC) spectrophotometric procedure suitable for conventional laboratories. The resin showed excellent salt tolerance, enabling Cr analysis in seawater, and was stable over extended use. All the interferents of this procedure that normally occur in an electroplating effluent, a blended coal CRM, and a standard steel sample could be removed by the recommended procedure, by use of partial and total selectivity at the adsorption and desorption stages, respectively, enabling preconcentration and colorimetric determination of chromium in various complex matrices.     

The binding ability of iron bonded to porphodimethene: structural, magnetic, and electronic relationship to iron porphyrin complexes

The availability of the parent compound, meso-hexaethylporphodimetheneiron(II), [(Et6N4)Fe] (2), of this report results from a novel synthetic methodology that makes [Et6N4Li2] (1) easily available. The major focus is on how the axial positions, which are the key reactive sites in metalloporphyrins, and the electronic configuration of the metal can be affected by the breakdown of the aromaticity of the porphyrin skeleton and by the nonplanar conformation of the ligand. DFT calculations indicate a 3B1(dz2)1(dyz)1 ground state for 2 versus the 3A2(dxz)1(dyz)1 ground state in the porphyrin analogue. The intermediate-spin state (S = 1) of 2 changed drastically upon addition of one or two axial ligands, as hexacoordination is preferred by iron(II). The hexacoordinate complexes [(Et6N4)Fe(L)(L')] (L = L' = THF, 3; L = L' = Py, 4; L = PhNO, L' = Py, 14) have been isolated and structurally characterized. Strong-field ligands lead to a low-spin diamagnetic state for iron(II), namely for complexes 4-7, 9, and 14, whereas 3 is a typical d6 high-spin complex, as is the pentacoordinate [(Et6N4)Fe(CN)]Bu4N (8). The structural analysis showed common features for 6, 7, 9, and 14: i) a small displacement of the metal from the N4 plane, and ii) an N4 cavity, larger than that in the corresponding porphyrins, affecting the Fe-N bond lengths. The 1H NMR spectrum is quite diagnostic of the two-fold symmetry in the diamagnetic hexacoordinate complexes, revealing either a D2h or a C2v symmetry. The CO stretching frequency (1951 cm(-1)) in complex 6 probes the good electron density at the metal. The one-electron oxidation of 2 led to pentacoordinate iron(III) derivatives [(Et6N4)Fe(Cl)] (10), [(Et6N4)2Fe2(mu-O)] (11), and [(Et6N4)2Fe2(mu-p-OC6H4-O)] (12). Complex 10 is a typical high-spin iron(III) (5.85muB at 298 K), while 11 and 12 behave as antiferromagnetic coupled iron(III) (J = -9.4cm(-1), 12, and J = -115cm(-1), 11). In complexes 10, 11, and 12 iron is sitting in a quite distorted square pyramidal geometry, in which the ligand displays a very distorted roof conformation with different degrees of ruffling. Distinctive structural and magnetic features have been found for the nitrosyl derivative [(Et6N4)Fe-NO], which has a low-spin state (S = 1/2) and the following structural parameters: Fe-N-O, 147.3(2) degrees; Fe-N, 1.708(2) A; N-O, 1.172(3) A. A comparative structural, magnetic, and theoretical analysis of the compounds listed above has been made with the analogous porphyrin derivatives. The detailed structural investigation has been mapped through the X-ray analysis of 2, 7, 8, 9, 11, 13, and 14.     

Use of the molybdenum-thiocyanate-rhodamine 6G ternary complex for spectrophotometric molybdenum determination without extraction

A modified thiocyanate method without extraction by using rhodamine 6G as a secondary ligand was developed. Molybdenum in 1.0×10⁻² M HCl, after the addition of ascorbic acid, was heated for 10 min in a 90 °C water bath for reduction. Suitable amounts of glycerine, Triton X-100, rhodamine 6G solutions and 2+1 (v/v) 9 M H₂SO₄+3 M KHSO₄ were added in this order. This solution was allowed to cool to room temperature and the absorbance at 570 nm was measured against a reagent blank 45 min after the addition of thiocyanate solution and the second aliquot of Triton X-100 solution. The complex was stable for at least 4 h, the order of reagent addition was important, and thiocyanate should be in large excess. Beer’s law was obeyed over the range 0.9×10⁻⁶ to 1.1×10⁻⁵ M Mo with the molar absorptivity being 1.1×10⁵ l mol⁻¹ cm⁻¹. The R.S.D. for the determination of 0.7 mg Mo l⁻¹ was 1.83% (n=8). Possible interferences of various cations and anions on molybdenum determination were studied. The proposed method was applied to the determination of molybdenum in a dental alloy, Wiron 99.     

Ferromagnetic NiII-GdIII interactions in complexes with NiGd, NiGdNi, and NiGdGdNi cores supported by tripodal ligands

Dinuclear [(NiL)Gd(hfac)(2)(EtOH)](H(3)L = 1,1,1-tris(N-salicylideneaminomethyl)ethane, Hhfac = hexafluoroacetylacetone), trinuclear [(NiL)(2)Gd(NO(3))], and tetranuclear [(NiL)Gd(CH(3)CO(2))(2)(MeOH)](2) complexes, were prepared by treating [Ni(HL)] with [Gd(hfac)(3)(H(2)O)(2)], Gd(NO(3))(3).6H(2)O, and Gd(CH(3)CO(2))(3).4H(2)O, respectively, in the presence of Et(3)N. All the complexes show that ferromagnetic interactions occur between the Ni(II) and Gd(III) ions.