Impedance and dielectric studies of ferroelectric SrBi2Nb2O9 ceramics

This paper reports the dielectric and impedance characteristics of ferroelectric SrBi₂Nb₂O₉ (SBN) ceramics in the 100 Hz-1 MHz frequency range at various temperatures (300-823 K). A strong low frequency dielectric dispersion (LFDD) associated with an impedance relaxation has been found to exist in these ceramics in the temperature range 573-823 K. The Z″ of the AC complex impedance showed two distinct slopes in the frequency range 100 Hz-1 MHz suggesting the existence of two dispersion mechanisms. This non-ideal behavior has been explained on the basis of the expression, Z*=R₀/(1+(iω/ω₁)^m+(iω/ω₂)ⁿ) [J. Phys. Chem. Solids 53 (1992) 1] where ω₁ and ω₂ characterize the lattice response and the charge carrier behavior, respectively. The exponents m and n were obtained from the curve fitting. The exponent n was found to exhibit a minimum at the Curie temperature, T_c (723 K) whereas the m was temperature independent.     

Moisture sorption, transport, and hydrolytic degradation in polylactide

Management of moisture penetration and hydrolytic degradation of polylactide (PLA) is extremely important during the manufacturing, shipping, storage, and end-use of PLA products. Moisture transport, crystallization, and degradation, in PLA have been measured through a variety of experimental techniques including size-exclusion chromatography, differential scanning calorimetry, and X-ray diffraction. Quartz crystal microbalance and dynamic vapor sorption experiments have also been used to measure moisture sorption isotherms in PLA films with varying crystallinity. A surprising result is that, within the accuracy of the experiments, crystalline and amorphous PLA films exhibit identical sorption isotherms.     

Molecular aggregation in the ternary system deca glycerol dioleate/heptane/water

The phase diagram for the ternary system deca glycerol dioleate(DGD)/heptane/water was established at 25 °C. In this phase diagram it was seen that the reverse micellar solution phase extends in its area until the water content reaches 35–45 wt%, at which a liquid crystalline phase begins to appear. On the basis of the experimental results of specific conductivity, viscosity, etc. for the samples containing a definite amount of DGD (0,1 M), and varying relative amounts of heptane and water, the mechanism of the transition of reverse micellar structures to liquid crystalline phase is discussed.     

Adsorption of Pb(2+) ions on nanosized gamma-Fe(2)O(3): formation of surface ternary complexes on ligand complexation

Adsorption of Pb²⁺ ions on the combustion derived nanosized γ-Fe₂O₃ and its thiourea complex composite is reported. The adsorbents upon adsorption of Pb²⁺ ions are characterised by X-ray diffraction, scanning electron microscopy, energy dispersive X-ray microanalysis and infrared spectroscopy techniques. The eluent is characterised by atomic absorption spectroscopy for the estimation of Pb²⁺ ions. The reduction in the amount of lead after adsorption was estimated to be around 50% in case of complex composite adsorbent and around 15% in case of the γ-Fe₂O₃ adsorbents. Orthorhombic PbSO₄ precipitated out from the eluent and is reported with a model reaction. Adsorption of lead onto the complex composite is explained through the formation of a surface tertiary complex. The advantage of employing a thiourea-γ-Fe₂O₃ complex composite as solid adsorbent for the adsorption of heavy metal pollutants is envisaged in the present investigation.     

Stabilization of p-block organoelement terminal hydroxides, thiols, and selenols requires newer synthetic strategies

Metal hydroxides represent a very interesting and highly useful class of compounds that have been known to chemists for a very long time. While alkali and alkaline earth metal hydroxides (s‐block) are commonplace chemicals in terms of their abundance and their use in a chemical laboratory as bases, the interest in Brønsted acidic molecular terminal hydroxides of p‐block elements, such as aluminum and silicon, has been of recent origin, with respect to the variety of applications these compounds can offer both in materials science and catalysis. Moreover, these systems are environmentally friendly, relative to the metal halides, owing to their ‐OH functionality (resembling that of water). Design and conceptualization of the corresponding terminal thiols, selenols, and tellurols (M? SH, M? SeH, and M? TeH) offer even more challenging problems to synthetic inorganic chemists. This concept summarizes some of the recent strategies developed to stabilize these otherwise very unstable species. The successful preparation of a number of silicon trihydroxides a few years back resulted in the generation of several model compounds for metal–silicates. The recent synthesis of unusual aluminum compounds such as RAl(OH)₂, RAl(SH)₂, and RAl(SeH)₂ with terminal EH (E=O, Se, or Se) groups is likely to change the ways in which some of the well‐known catalytic conversions are being carried out. The need for very flexible and innovative synthetic strategies to achieve these unusual compounds is emphasized in this concept.     

Studies on hydrogen ferrite phase in γ-Fe2O3 synthesised from ferrous fumarate half hydrate precursor

Thermal techniques viz., TG/DTA/DSC methods have been employed in understanding the formation and decomposition of hydrogen ferrite phase (H-F) as a metastable intermediate in the conversion of -Fe₂O₃·xH₂O, to -Fe₂O₃. Magnetic hysteresis measurements carried out at liquid N₂ and at room temperature for the vacancy ordered -Fe₂O₃ and its H-F phase also supplement these studies.The author thanks prof. M.R. Udpa, IIT, Madras for supplying TG/DTA data on Stanton Redcroft Instrument and to the Head, Department of Chemistry, S.P. University, Vallabh Vidyanagar for providing the facilities.     

Designer ribozymes: programming the tRNA specificity into flexizyme

Fx3 is an artificial ribozyme with the ability to aminoacylate various tRNAs with phenylalanine and its nonnatural derivatives. Herein we report a simple strategy to build tRNA specificity into the generic Fx3, by appending to its 3'-end a tRNA-specific sequence (TSS), which is complementary to the acceptor stem of the cognate tRNA. This new designer ribozyme, referred to as Fx10, is able to recognize its cognate tRNA via a 10-base-pair interaction that is formed after the invasion of the tRNA acceptor stem by the TSS. We have demonstrated that Fx10 can aminoacylate its cognate tRNA with a high degree of specificity and also discriminate against the noncognate tRNAs. Because the tRNA specificity can be easily programmed into Fx10, it is a custom-made catalyst to generate nonnatural aminoacyl-tRNAs.     

Synthesis of homoceramides, novel ceramide analogues, and their lack of effect on the growth of hippocampal neurons

The synthesis of a new series of D-erythro-homoceramide analogues is described. Several synthetic approaches were investigated. Homoceramides can be successfully synthesized from L-homoserine as chiral building block and a protected Weinreb-amide as a key intermediate. The synthesis of short-chain analogues with a heptyl side chain, as well as with a phenyl residue in the sphingoid part (instead of the naturally occurring tridecyl side chain), was effected. The homoceramides 15-17 and 24 were investigated for their potential to reverse the inhibitory effect of fumonisin B(1) on axonal growth. Unfortunately, none of the tested compounds showed any biological activity due to their lack of metabolism to glucosylhomoceramide.