Novel preparation method of nanosilver doped sol gel TiO2 photocatalysts for dye pollutant degradation

In the present study, a novel method for the silver nanoparticle incorporation into TiO₂ sol is reported which provides efficient dispersion of inserted metal in the calcined gel. Glucose mediated metal nanoparticle synthesis eliminates the additional steps for the introduction of dopant over the support. Ag nanoparticle acts as competent trapping centers preventing the recombination of electron?Chole pairs. Thus, in spite of the low UV intensity present in the sunlight, considerable enhancement in the catalytic efficiency was observed for the degradation of dye pollutants over nanosilver loaded TiO₂. Transmission electron microscopic images display the well isolated nanoparticles of silver having uniform dimensions of less than 5?nm over the best system, 2?wt% nanosilver loaded TiO₂, which is accountable for its effectiveness as a photocatalyst. Anatase is found to be the photocatalytic active phase, as evident from the X-ray diffraction studies.     

Rapid Biosynthesis of Silver Nanoparticles Using Areca Nut (Areca catechu) Extract Under Microwave-Assistance

In this research paper, we report on the rapid synthesis of silver nanoparticles using dried areca nut (Areca catechu). The microwave exposed aqueous areca nut powder when treated with the aqueous silver salt solution yielded irregular shaped silver nanoparticles. The formation and morphology of the nanoparticles are studied using UV–visible spectroscopy, field emission scanning electron microscopy, transmission electron microscopy and atomic force microscopy. The X-ray diffraction studies and energy dispersive X-ray analysis indicate that the particles are crystalline in nature. The understanding of capping of biological moiety is derived from Fourier transform infrared spectroscopy and the thermogravimetric analysis. The green chemistry approach for the synthesis of silver nanoparticles is modest, amenable for large scale commercial production. Further the biologically synthesized silver nanoparticles are known for their potential antibacterial activity.     

Isoelectric focusing in polyacrylamide gel carried out with a simple device for power regulation. Application to mammalian growth hormones

A unit is described to regulate the electrical power delivered to an isoelectric focusing cell. The device consists in a resistance set, in series with a power supply, which can be adjusted to a suitable resistance value in order to permit only minor changes in wattage. Simultanoeus monitoring of voltage and current is also carried out with a pen-recorder adaptor. The improvements in operative conditions achieved by these means are tested by the fractionation of mammalian growth hormones.     

A Multifunctional Subphthalocyanine Nanosphere for Targeting,Labeling, and Killing of Antibiotic‐Resistant Bacteria

Developing a material that can combat antibiotic‐resistant bacteria, a major global health threat, is an urgent requirement. To tackle this challenge, we synthesized a multifunctional subphthalocyanine (SubPc) polymer nanosphere that has the ability to target, label, and photoinactivate antibiotic‐resistant bacteria in a single treatment with more than 99 % efficiency, even with a dose as low as 4.2 J cm⁻² and a loading concentration of 10 nM . The positively charged nanosphere shell composed of covalently linked SubPc units can increase the local concentration of photosensitizers at therapeutic sites. The nanosphere shows superior performance compared to corresponding monomers presumably because of their enhanced water dispersibility, higher efficiency of singlet‐oxygen generation, and phototoxicity. In addition, this material is useful in fluorescence labeling of living cells and shows promise in photoacoustic imaging of bacteria in vivo.     

Renner-Teller and Fermi resonance interactions for the v3=1 and v7=2 vibronic levels in the A2Πu and X2Πg electronic states of HC4H+

The excitation of the v(3) = 1 (σ(g)(+) C-C stretch) and the v(7) = 2 (π(g)(2) C≡C-C bend) modes in the A(2)Π(u) electronic state of diacetylene cations results in Renner-Teller (R-T) and Fermi interactions. The 3(0)(1) and 7(0)(2) vibronic bands in the A(2)Π(u)-X(2)Π(g) transition of HC(4)H(+) have been measured with rotational resolution using cavity ringdown spectroscopy in a supersonic slit jet discharge. The analysis yields T(00) = 20520.828(4) cm(-1), B' = 0.14047(2) cm(-1), and A' = -17.95(1) cm(-1) for the v(3) = 1 and T(00) = 20573.659(4) cm(-1), B' = 0.14018(3) cm(-1), and A' = -11.55(1) cm(-1) for the v(7) = 2 level in the A(2)Π(u) electronic state. A vibronic analysis has been carried out taking into consideration the R-T, spin-orbit, and Fermi resonance interactions between the ν(3) and ν(7) modes. The levels are fitted to the eigenvalues of an appropriate Hamiltonian matrix. This yields the vibrational frequencies ω(3)′ = 811.8 cm(-1) and ω(7)′ = 403.2 cm(-1), Renner parameter ε(7)′ = 0.065, Fermi coefficients W(1)′ = 10.3 cm(-1) and W(2)′ = 5.1 cm(-1), and spin-orbit interaction constant A(SO)′ = -31.1 cm(-1). A corresponding R-T analysis has been carried out for the X(2)Π(g) ground state of HC(4)H(+) using data available in the literature [Callomon, J. H. Can. J. Phys. 1956, 34, 1046]. This gives ω(3)" = 956.2 cm(-1), ω(7)" = 435.4 cm(-1), ε(7)" = 0.028, W(1)" = 7.2 cm(-1), W(2)" = 10.9 cm(-1), and A(SO)" = -33.3 cm(-1).     

A proteomic strategy for the identification of caspase-associating proteins

We report the efficient in vivo labelling of caspases expressed inside apoptotic HeLa cells using fluoromethyl ketone (fmk)-containing probes; preliminary results indicated that these probes may be used to identify caspase-associating proteins.     

Synthesis of Graphene and Its Applications: A Review

Graphene, one-atom-thick planar sheet of carbon atoms densely packed in a honeycomb crystal lattice, has grabbed appreciable attention due to its exceptional electronic and optoelectronic properties. The reported properties and applications of this two-dimensional form of carbon structure have opened up new opportunities for the future devices and systems. Although graphene is known as one of the best electronic materials, synthesizing single sheet of graphene has been less explored. This review article aims to present an overview of the advancement of research in graphene, in the area of synthesis, properties and applications, such as field emission, sensors, electronics, and energy. Wherever applicable, the limitations of present knowledgebase and future research directions have also been highlighted.     

Bis(2‐but­yl‐N,N′‐diisopropyl­amidinato)dichloro­hafnium(IV)

The title compound, [Hf(C₁₁H₂₃N₂)₂Cl₂], is a monomeric hafnium(IV) complex containing two bidentate amidinate ligands and two cis Cl atoms. The crystals are triclinic (space group ) and there is one independent six‐coordinate monomer with a highly distorted octa­hedral geometry in the asymmetric unit. The reported structure is the first hafnium–amidinate complex to be characterized successfully by single‐crystal X‐ray diffraction.     

Flow and breakup characteristics of elliptical liquid jets

This paper presents the results of an experimental study on liquid jets discharging from elliptical orifices into still ambient air. The experiments were conducted with a set of elliptical orifices of approximately same area of cross section but varying orifice aspect ratio using water and water–glycerol mixture as experimental fluids. The flow behavior of liquid jets was analyzed using their photographs captured by an imaging system. The measurements obtained for the elliptical liquid jets were compared with the circular liquid jets discharging from a circular orifice of the same area of cross section. Elliptical geometry of the orifice results in a flow process by which the emanating liquid jet periodically switches its major and minor axes as it flows downstream of the orifice. In this paper, we attempt to characterize the axis-switching process through its wavelength and amplitude. For a given elliptical orifice, the axis-switching process is dominantly seen in a particular range of flow conditions. The effects of the orifice aspect ratio and liquid viscosity on the axis-switching process are revealed through this study. The experimental results on jet breakup show that axis-switching process has a destabilizing effect on elliptical liquid jets within a particular range of flow conditions and it results in shorter breakup lengths compared to the circular jet. The extent to which axis-switching destabilizes the jet is dictated by the viscosity of liquid. An increase in orifice aspect ratio destabilizes elliptical liquid jets with low viscosity like water; however, this behavior seems to get obscured in water–glycerol mixture elliptical jets due to high viscosity.