直接置换法制备包覆型纳米铜-银双金属粉末

 以AgNO₃为主盐，采用直接置换法初步制备了包覆型纳米铜-银双金属粉末，分析了工艺条件对包覆效果的影响，并用透射电子显微镜、X射线能量色散谱仪和X射线衍射仪进行了表征。实验结果表明：纳米铜-银双金属粉末为包覆型结构，平均粒径约70 nm，分散性较好，表面银的原子分数达到74.28%。在洗涤过程中加入一定量的保护剂，有效解决了纳米铜粉的氧化问题。     

HgCl2/I2复合催化剂协同催化合成异丙醇钇的研究

以金属钇和异丙醇为原料，以HgCl2/I2为复合催化剂，通过对金属钇的机械加工以增加其比表面，并将异丙醇脱水使其含水量降低至0．05％，体系在82℃回流5h，经过滤、减压蒸馏，得到了白色海绵状异丙醇钇，其产率高达83％，合成时间比文献报道的缩短了19h，产率提高了8％。文章确定了催化剂的最佳用量为20gY加入60mg HgCl2/I2，研究了合成产率与HgCl2/I2催化剂和HgCl2催化剂的依赖关系及异丙醇中含水量对合成产率的影响，并对HgCl2/I2的催化作用机理进行了初步探讨。     

直径对脉冲爆震发动机性能的影响

本文通过实验研究了脉冲爆震发动机的直径对其性能的影响．实验结果表明；当爆震室的直径增大时，爆震波压力波形相似，平均峰值压力比较接近，且比冲基本保持不变，而推力则随爆震室直径的增大而增大。实验曲线表明爆震室内的流动具有自相似性，从而为建立尺寸律提供了实验依据．本文中比冲和平均推力是利用摆动原理测量的，并与由作用在推力壁上的压力计算得出的比冲和平均推力的理论值和实验值进行了比较，结果基本吻合，说明该测量方法可行．     

8 mm回旋行波管和返波管的三折螺旋波纹波导色散分析

 三折螺旋波纹波导使TE11模和TE21模相互耦合，其色散曲线能够在宽频带内与电子回旋共振，因此需要对色散方程进行研究。提出了适合工程实用的行波模式和返波模式的色散方程，并对方程中的耦合系数进行了简化，误差在1%左右。利用CST软件的VBA语言对螺旋波纹波导进行建模和计算，根据模拟得到的传输特性曲线的特点，提出一种模拟方法，将模拟与理论计算得到的色散曲线作对比，误差在5%左右。     

醇+N-甲基哌嗪二元体系的体积性质

采用振荡管式数字密度计分别测定甲醇、乙醇、正丙醇、异丙醇、丁正醇和异丁醇与N-甲基哌嗪组成的二元体系在298.15K下的密度，计算了超额摩尔体积、超额偏摩尔体积、表观摩尔体积、偏摩尔体积等体积性质，从分子相互作用角度讨论了这些二元体系的体积性质的变化规律，为N-甲基哌嗪的开发和研究提供基础数据和信息。     

枸杞产地的红外指纹图谱与聚类分析法研究

本文首次采用傅里叶变换红外 (FTIR)光谱法并结合SMICA聚类分析法对不同产地 :宁夏玉西、宁夏中宁及内蒙古托克托旗的枸杞进行了聚类分析。结果表明 ,聚类分析技术对来自不同产地的枸杞可进行鉴别 ,该法快速、准确 ,为客观评价中药材的来源提供了一种新的方法。     

Synthesis of a soluble pyrrole copolymer with phenetidine

A new series of copolymers was synthesized through the oxidative polymerization of pyrrole (PY) and o‐phenetidine (PHT) with inorganic oxidants in acidic media. The polymerization parameters including the mixing method of the oxidant with the comonomer, the comonomer ratio, the time, the temperature, the oxidant, the organic medium, and the acid were systematically optimized for the synthesis of copolymers with high yields, intrinsic viscosities, and solubility. The resultant copolymers were characterized by elemental analysis, infrared, ultraviolet–visible, solution high‐resolution ¹H NMR and solid‐state high‐resolution ¹³C NMR, circular dichroism spectroscopy, and cyclic voltammetry. The results showed that the PY observed content in the copolymers was much higher than the PY feed content. The regular variation of the polymerization yield, intrinsic viscosity, solubility, macromolecular structure, and electroactivity of the resulting polymers with the comonomer ratio, together with the complete solubility of a PY/PHT (10/90) polymer in highly polar solvents, indicated the formation of real random copolymers containing both PY and PHT units rather than a mixture of two homopolymers. However, the polymers containing more than 59 mol % PY were not homogeneous copolymers consisting of soluble and insoluble parts. A semiquantitative relationship between the polymerization yield or solubility of the copolymers and the polarity index of the organic solvents was examined. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2073–2092, 2004     

Differential pulse anodic stripping voltammetric determination of traces of copper with a tobramycin-Nafion modified electrode.

A Nafion-modified glassy carbon electrode incorporated with tobramycin for the voltammetric stripping determination of Cu2+ has been explored. The electrode was fabricated by tobramycin containing Nafion on the glassy carbon electrode surface. The modified electrode exhibited a significantly increased sensitivity and selectivity for Cu2+ compared with a bare glassy carbon electrode and the Nafion modified electrode. Cu2+ was accumulated in HAc-NaAc buffer (pH 4.6) at a potential of -0.6 V (vs. SCE) for 300 s and then determined by differential pulse anodic stripping voltammetry. The effects of various parameters, such as the mass of Nafion, the concentration of tobramycin, the pH of the medium, the accumulation potential, the accumulation time and the scan rate, were investigated. Under the optimum conditions, a linear calibration graph was obtained in the concentration range of 1.0 x 10(-9) to 5.0 x 10(-7) mol l(-1) with a correlation coefficient of 0.9971. The relative standard deviations for eight successive determinations were 4.3 and 2.9% for 1.0 x 10(-8) and 2.0 x 10(-7) mol l(-1) Cu2+, respectively. The detection limit (three times signal to noise) was 5.0 x 10(-10) mol l(-1). A study of interfering substances was also performed, and the method was applied to the direct determination of copper in water samples, and also in analytical reagent-grade salts with satisfactory results.     

Study on the Superhydrophilicity of the SiO2-TiO2 Thin Films Prepared by Sol-Gel Method at Room Temperature

Nanoscale SiO₂-TiO₂ composite thin films with the thickness of about 100 nm were prepared by sol-gel method at room temperature in air. The chemical states of the elements on the surface and near the surface were measured by XPS. The results showed that the Ti on/near the surface of the thin films existed not only as TiO₂ but also as Ti₂O₃. Part of the TiO₂ was changed to Ti₂O₃ after UV irradiation. The crystalline structure of the TiO₂ in the SiO₂-TiO₂ thin films was anatase with the crystallite size of 14–20 nm. It was found that the thin film prepared at room temperature in air has good superhydrophilic property and has strong adherence to the substrate.