Bis­(ethyl­enedi­amine)copper(II) bis(O,O′‐diethyl di­thio­phosphate)

In the structure of the title compound, [Cu^II­(en)₂][(EtO)₂P(S)S]₂ (en is ethyl­ene­di­amine) or [Cu(C₂H₈N₂)₂](C₄H₁₀O₂PS₂)₂, the Cu atom lies on a center of inversion and is coordinated in a slightly distorted square coordination geometry by four N atoms from two ethyl­enedi­amine mol­ecules. The diethyl di­thio­phosphate moieties, (EtO)₂P(S)S^?, act as counter‐anions.     

Comparison of the elastic and inelastic scatterings between152Sm+12C and148 Nd+16O

Angular distributions of elastic and inelastic scattering have been measured for¹⁵²Sm+¹²C at 63.2 MeV and¹⁴⁸Nd+¹⁶O at 90.9 MeV. An evident interference pattern in the inelastic scattering has been observed for the first time in a strong Coulomb coupling system.We are indebted to Dr. S. Pieper for supplying the Ptolemy Program. One of us (Chenglie Jiang) would like to acknowledge the Argonne National Laboratory for the opportunity given, to perform theoretical calculations with the code Ptolemy during his visit there. Thanks are also due to Mr. H. Folger (GSI, Germany) for supplying the targets. This work was supported in part by China National Nature Science Fundation.     

Determination of isoflavones in red clover and related species by high-performance liquid chromatography combined with ultraviolet and mass spectrometric detection

High-performance liquid chromatography-UV-electrospray ionization-mass spectrometric detector (HPLC-UV-ESI-MSD) method for determination of isoflavones in red clover (Trifolium pratense L.) and related species has been developed. The separated isoflavones including aglycones, glycosides and glycoside malonates, were individually analyzed and identified by their molecular ions and characteristic fragment ion peaks using LC-MSD under MS and MS-MS mode, and in comparison with the standard isoflavones. A total of 31 isoflavones were detected in red clover. Several isoflavones were also identified for the first time in related species, T. repense L. (white clover), T. hybridum L. (alsike clover) and T. campestre Schreber (hop trefoil). Based on reversed phase HPLC, all 10 isoflavone aglycones, daidzein, formononetin, genistein, pseudobaptigenin, glycitein, calycosin, prunetin, biochanin A, irilone and pratensein in acidic hydrolyzed extracts were successfully separated within 40 min and quantified individually by UV and MS detectors. For the 10 target compounds, the investigated concentrations ranged from approximately 24 to approximately 12500 ng/ml for UV detection and approximately 6 to approximately 3125 ng/ml for MS detection, and good linearities (r2 > 0.999 for UV and r2 > 0.99 for MS) for standard curves were achieved for each isoflavone. The accuracy and repeatability (n = 10) were within 15% for these 10 compounds. This is the first method reported that enables the simultaneous quantitation of all 10 isoflavone aglycones in red clover and related species.     

Determination of proanthocyanidins in fresh grapes and grape products using liquid chromatography with mass spectrometric detection

Fresh grapes and grape products, such as grape wine and grape juice, were analyzed for proanthocyanidins (PACs) using liquid chromatography with electrospray ionization mass spectrometric (MS) detection. PACs were successfully separated and analyzed on the basis of their protonated molecules, allowing the identification of PACs in different degrees of polymerization from monomers to oligomers (up to 7 units), and in various isomeric forms. Using reversed-phase high-performance liquid chromatography (HPLC) combined with MS detection, the PAC monomers, (+)-catechin (C), (-)-epicatechin (EC), (-)-catechin gallate (CG), and (-)-epicatechin gallate (ECG), were successfully quantified using selected ion monitoring (SIM) mode. Standard curves were fitted for each PAC ranging from 43.8 to 5600 ng/mL for C, from 42.2 to 5400 ng/mL for EC, from 36.7 to 4700 ng/mL for CG, and from 39.8 to 5100 ng/mL for ECG. Good linearity (r2>0.999) was achieved for each analyte. The accuracy and precision (RSD) were within 10% (n=8) at the limit of detection. This method allows direct quantification of monomeric PACs in fresh grapes and grape-derived products. Additionally, flow injection analysis (FIA) was applied to estimate the concentration levels of PAC oligomers by comparing their FIA-MS peak areas, which were well correlated (r2=0.936) to the total concentrations of PAC monomers.     

Yb3+掺杂稀土钽铌酸盐的晶体场从头计算研究

Yb³⁺掺杂晶体材料是重要的激光材料,在超短脉冲激光、大功率激光等领域有重要应用前景,但长期以来很难通过实验拟合确定Yb3+晶体场参数,尤其是低对称体系,从头计算是解决此问题的重要途经.本文介绍了适合计算稀土离子掺杂晶体的从头计算DV-Xα方法和有效哈密顿量模型,用该方法计算了Yb³⁺掺杂M型和M'型钽铌酸盐的晶场参数和旋轨耦合参数,得到的能级结构和实验能很好地符合,并发现了Yb³⁺掺杂钽铌酸盐的晶场强度参数随稀土原子序数呈现规律变化.表明结合DV-Xα计算和有效哈密顿量方法是计算Yb³⁺掺杂低对称钽铌酸盐晶体场的有效途径,结果显示Yb3+掺杂钽铌酸盐晶体有望成为新型全固态激光工作物质.     

Sensor configuration for distributed passive localization system in ocean acoustic field

In order to improve the localization accuracy of the distributed passive location system in the ocean acoustic field,a sensor configuration method is proposed b...     

Electrodeposited molybdenum-doped Co3O4 nanosheet arrays for high-performance and stable hybrid supercapacitors

Journal of Solid State Electrochemistry - Long-cycle stability and high-energy density are big challenges for developing high-performance hybrid supercapacitor (HSC) electrode materials. In this...     

Morphology of Electropolymerized Poly(N-Methylaniline) Films

The influence of polymerization conditions on the morphology of thin films of poly-(N-methylaniline) (PNMA) was studied. The films were prepared by electropolymerization on gold and platinum electrodes and studied by optical and electron microscopy. It was demonstrated that the film morphology does not depend on the polymerization rate or on the electrode metal. However, it is sensitive to the kind of counter ion of PNMA. The polymers containing acetate or chloride do not form stable films. Polymer films containing phosphate or sulfate display inhomogeneous structures. A formation of sprouts and nanotubes was observed for PNMA sulfate. The films formed by PNMA perchlorate are smooth and transparent (glass-like structure). A sublayer of 4-aminothiophenol increases the adhesion of polymers to the gold surface.     

Mechanically tunable broadband terahertz modulator based on high-aligned Ni nanowire arrays

We present a mechanically tunable broadband terahertz(THz) modulator based on the high-aligned Ni nanowire(NW)arrays. The modulator is a sandwich structure consisting of two polydimethylsiloxane layers and a central layer of highaligned Ni NW arrays. Our experimental measurements reveal the transmittance of THz wave can be effectively modulated by mechanical stretching. The NW density in arrays increases with the strain increasing, which induced an enhancement in the absorption of THz wave. When the strain increases from 0 to 6.5%, a linear relationship is observed for the variation of modulation depth(MD) of THz wave regarding the strain, and the modulated range is from 0 to 85% in a frequency range from 0.3 THz to 1.8 THz. Moreover, the detectable MD is about 15% regarding the 1% strain change resolution. This flexible Ni NW-based modulator can be promised many applications, such as remote strain sensing, and wearable devices.