苯基重氮盐-冠醚分子嵌合物的FAB-MS及其准分子离子生成机理的研究

Fast atom bombardment mass spectra of a series of arenediazonium salts with various substituents complexed with 18-crown-6 and dibenzo-24-crown-8 ethers were examined. The correlation between quasi-molecular ion abundance of various complexes and the properties, coordination ability of donor-acceptor linkages in the complexes were studied. By using molecular orbital calculation we have successfully demonstrated that the correlation cited is related to the electron cloud densities on the heteroatoms α-N and β-N of arenediazonium salts.     

Pore Structure Analysis of Porous Particles by Equivalent Model

Starting from Wheeler's composite theory, which takes both the multilayer adsorption and the capillary condensation into consideration, and assuming the equivalent cylindrical model, we have deduced a strict and relatively simpler formula for the calculation of pore size distribution by solving the integral equation directly. The formula is more convenient for application because of its recursion form. Following the same line of reasoning and using the mean value theorem of definite integrals under different conditions, we have unified the equations of Barrett-Joyner-Halenda, Dubinin, Cranston-Inkley, Dollimore-Heal and Roberts. A table of parameters which is required in the calculation is given. Besides the adsorption of nitrogen, the adsorption with water vapor as the adsorbate is investigated and the corresponding empirical equation of adsorption thickness is given.     

超临界二氧化碳中卟啉与钴(II)、镍(II)、锌(II)配合物反应动力学

用紫外-可见光谱研究了钴(II)、镍(II)、锌(II)的1, 1, 1, 5, 5, 5-六氟-2, 4-戊二酮-二水配合物[M(hfac)2(H₂O)₂, M=Co、Ni、Zn]与5, 10, 15, 20-四(五氟苯基)卟啉[H2tpfpp]在超临界二氧化碳中反应生成金属卟啉[M(tpfpp)]的反应动力学. 在金属配合物大大过量时, 反应对卟啉为一级. 其表观一级速率常数随钴(II)、镍(II)配合物的浓度增加先增加、而后趋于稳定, 而表观一级速率常数随锌(II)配合物的浓度增加线形增加. 根据实验事实, 讨论了反应的机理, 得到了相应的热力学和动力学参数.     

Cr掺杂对K2La2Ti3O10光催化活性的影响

通过溶胶-凝胶法制备了层状钙钛矿结构的K₂La₂Ti₃O₁₀及Cr掺杂的K₂La₂Ti₃O₁₀，采用X-射线衍射(XRD)、紫外可见漫反射光谱(DRS)、X射线光电子能谱(XPS)等对K₂La₂Ti₃O₁₀及Cr掺杂K₂La₂Ti₃O₁₀进行了表征。以I^-为电子给体、分别在紫外和可见光辐射下研究了K₂La₂Ti₃O₁₀及Cr掺杂K₂La₂Ti₃O₁₀光催化分解水的产氢活性。采用第一性原理，计算了Cr掺杂对K₂La₂Ti₃O₁₀半导体能带结构和态密度的影响，从电子结构的变化揭示了掺杂引起光催化活性差异的原因。结果表明，Cr的掺入能够改善和提高K₂La₂Ti₃O₁₀的光解水的产氢活性；Cr改善和提高K₂La₂Ti₃O₁₀的光解水的产氢活性存在一个最佳的掺杂浓度；当Cr与Ti的物质量的比为0.02∶1时，紫外光催化分解水产氢速率为1 500 μmol·L^-1·h^-1，可见光催化分解水产氢速率为83.6 μmol·L^-1·h^-1，分别为K₂La₂Ti₃O₁₀掺杂改性前产氢速率的26和5倍。     

Dynamic Ring-chain Equilibrium of Nucleophilic Thiol-yne “Click” Polyaddition for Recyclable Poly(dithioacetal)s

We report a dynamic polymerization system based on the reversible nucleophilic Michael polyaddition of activated alkynes and dithiols. Four poly(dithioacetal)s(P1-P4) were prepared via the base-catalyzed thiol-yne "click" polyaddition of two dithiols(1,4-butanedithiol(4 S) and 1,5-pentanedithiol(5 S)) and two alkynones(3-butyn-2-one(Y1) and 1-phenyl-2-propyn-1-one(Y2)) at high concentrations. We systematically investigated the base-catalyzed polymerization of 4 S and Y1(for polymer P1) under different conditions, and found that this polymerization was a highly concentration-dependent dynamic system: polymer P1 was formed at high concentration, while seven-membered dithioacetal, 1-(1,3-dithiepan-2-yl) propan-2-one(C1), was obtained at low concentration. The polymerization of 4 S and Y2(for polymer P4)displayed similar polymerization behavior, generating 2-(1,3-dithiepan-2-yl)-1-phenylethanone(C4) at low concentration. On the contrary,polymer P2(from Y1 and 5 S) was exclusively obtained with no formation of eight-membered dithioacetal. The polymerizations of Y1 with 1,2-ethanedithiol(2 S) and 1,3-dimercaptopropane(3 S) only afforded corresponding five-and six-membered dithioacetals, 1-(1,3-dithiolan-2-yl)propan-2-one(C2) and 1-(1,3-dithian-2-yl) propan-2-one(C3). This dynamic behavior of P1 and P4 was attributed to the concentrationdependent retro-Michael addition reaction between a thiol and a β-sulfido-α,β-unsaturated carbonyl compound catalyzed by bases.Furthermore, polymers P1 and P4 could be depolymerized into C1 and C4 in yields of 58% and 95%, respectively. The ring-opening polymerization of C1 at high concentration could successfully regenerate polymer P1. Thus, a new type of closed-loop recyclable poly(dithioacetal)s was developed.     

微粉型四钼酸铵热容的测定

Single phase of ammonium tetramolybdate in the micro power form was prepared from polyphase ammonium paramolybdate. Its heat capacity from 14.25℃ to 120.12 ℃ was measured by drop method and the result is
Cp=0.3936+7.4047×10-4T+6.3543×10-3T-2(J•K-1•g-1)     

石墨烯-氧化钨复合薄膜的制备及界面电子传输特性

以偏钨酸铵为钨源、聚乙烯吡咯烷酮为连接剂,采用浸渍提拉法制备了石墨烯-氧化钨复合薄膜,利用X射线衍射（XRD）、扫描电镜（SEM）、透射电镜（TEM）及Raman光谱等方法对复合结构材料进行了表征,并利用光电流测试、交流阻抗谱（EIS）、瞬态光电流谱和强度调制光电流谱等方法,研究复合薄膜电极在光电作用下界面上的载流子转移过程和电荷传输行为. 结果表明,组成薄膜的氧化钨纳米颗粒与石墨烯充分复合,光电性能显著提高;与石墨烯复合后,薄膜的瞬态时间常数增大,电子-空穴对寿命延长;电子传输时间减少,为纯氧化钨薄膜的47.5%.     

火灾烟颗粒的分形结构形状模拟与光散射计算

针对火灾烟颗粒的形状特点，提出并建立火灾烟颗粒分形结构凝团的形状模型，并对烟颗粒扫描电镜(SEM)图像进行分析，获取分形结构模型中的单个凝团中基本颗粒个数、凝团分形维数、基本颗粒半径等参数.利用该模型对火灾烟颗粒的形状进行模拟的结果表明，该模型能够较好反映出烟颗粒的形貌特征.利用形状模型对火灾烟颗粒散射进行初步计算表明，在其他参数相同的情况下，相对于同体积的球形颗粒，分形凝团具有前向散射较弱，后向散射较强的特征.     

聚合物前驱体法制备立方相WO_3薄膜的光电化学性质

以(NH4)6W7O24·6H2O为钨源,聚乙二醇1000(PEG 1000)为配位聚合物,采用聚合物前驱体法制备了WO3薄膜,利用X射线衍射(XRD)、扫描电子显微镜(SEM)、紫外-可见(UV-Vis)吸收光谱等手段对其结构进行表征.采用循环伏安法、Mott-Schottky测试、瞬态光和稳态光电流谱等方法研究了WO3薄膜电极的光电化学性能.结果表明,制备的WO3薄膜为立方晶系,禁带宽度约为2.7eV.当热处理温度为450℃时,载流子浓度达到最大2.44×1022cm-3,平带电位为0.06V,在500W氙灯光源照射和1.2V偏压下,光电流密度为2.70mA·cm-2.进一步探讨了热处理温度对其光电性质的影响及其机理.