Conductance of tetraalkylammonium salts in 2-butanone from −45 to 25°C

Interactions of three types of tetraalkylammonium cations (tetrapropyltetrabutyl-and tri-isoamylbutyl- ammonium) with perchlorate and tetraphenylborate anions were studied by the conductivity method in 2-butanone from –45°C to 25°C. Conductance data obtained for diluted solutions (5×10^–5 – 2×10^–3 mol-dm^–3) were used to calculate the limiting molar conductivities and associationconstants. The conductance equation of Fuoss-Hsia including the Chen term and the chemical model assumption were applied. Limiting ion conductivities were calculated assuming equal limiting conductivities of the i-Am₃BuN⁺ and BPh ₄ ^– ions at all temperatures. Gibbs energies and entropies of ion pair formation, calculated from the dependence of association constants on temperature, are presented including the contributions due to short-range forces.     

Solvatochromism as an efficient tool to study N,N‐dimethylamino‐ and cyano‐substituted π‐conjugated molecules with an intramolecular charge‐transfer absorption

A representative data set has been gained by the measurement of the electronic absorption spectra of 12 systematically selected push–pull systems with an intramolecular charge‐transfer (CT) absorption and the general structure D–π–A (D = donor, A = acceptor) featuring electron‐withdrawing CN groups, electron‐donating N(CH₃)₂ groups, and various π‐conjugated backbones in 32 solvents with different polarities. The longest‐wavelength absorption maxima λ_max and the corresponding wavenumbers $\tilde {v}_{{\rm max}} $ were evaluated from the UV/Vis spectra measured in 32 well‐selected solvents. The D–π–A push–pull systems were further characterized by quantum‐chemical quantities and simple structural parameters. Structure–solvatochromism relationships were evaluated by multidimensional statistic methods. Whereas solvent polarizability and solvent cavity size proved to be the most important factors affecting the position of λ_max, the solvent polarity was less important. The most important characteristics of organic CT compounds are the energy of the LUMO, the permanent dipole moment, the COSMO (COnductor‐like Screening MOdel) area, the COSMO volume, the number, and ratio of N,N‐dimethylamino and cyano groups, and eventually the number of triple bonds (π‐linkers). A relation between the first‐order polarizability α, the longest‐wavelength absorption maxima λ_max, and the structural features has also been found. The higher‐order polarizabilities β and γ are not related to the observed solvatochromism. Copyright © 2010 John Wiley & Sons, Ltd.     

Regioselective ipso-nitration of calix[4]arenes

A novel protection/deprotection method leading to the regioselective ipso-substitution of calix[4]arenes is described. The introduction of nosyl (p-nitrobenzenesulfonyl) groups into the lower rim of partly alkylated tert-butylcalix[4]arenes leads subsequently to the exclusive ipso-nitration of the alkylated phenol rings, while the protecting groups can be easily removed in the next step. This method gives dialkoxy- or trialkoxy-substituted calix[4]arenes with nitro groups on the alkylated rings and tert-butyl groups on the remaining ones. The above substitution pattern is complementary to the isomers so far known in the chemistry of calix[4]arenes and could be used in the design of novel type of calixarene-based receptors.     

Photophysics of 9,9-Dimethylacridan-Substituted Phenylstyrylpyrimidines Exhibiting Long-Lived Intramolecular Charge-Transfer Fluorescence and Aggregation-Induced Emission Characteristics

Six pyrimidine-based push–pull systems substituted at positions C2 and C4/6 with phenylacridan and styryl moieties, employing methoxy or N,N-diphenylamino donors, have been designed and synthesized through cross-coupling and Knoevenagel reactions. X-ray analysis confirmed that the molecular structure featured the acridan moiety arranged perpendicularly to the residual π system. Photophysical studies revealed significant differences between the methoxy and N,N-diphenylamino chromophores. Solvatochromic studies revealed that the methoxy derivatives showed dual emission in polar solvents. Time-resolved spectroscopy revealed that the higher energy band involved very fast (<80 ps) fluorescence, whereas the lower energy one included long components (≈30 ns) due to long-lived intramolecular charge-transfer fluorescence. In contrast to N,N-diphenylamino chromophores, the methoxy derivatives also showed aggregation-induced emission in mixtures of THF/water, as well as dual emission in thin films, covering almost the whole visible spectrum with corresponding chromaticity coordinates not far from that of pure white light. These properties render the methoxy derivatives as very promising organic materials for white organic light-emitting diodes.     

Supercritical fluid extraction of isoflavones from biological samples with ultra-fast high-performance liquid chromatography/mass spectrometry

An efficient method of modifier addition for supercritical fluid extraction (SFE) of polar isoflavones was developed and yielded extraordinarily high recoveries. To find the optimal extraction conditions, a temperature and pressure optimization and modifier impact study was performed in naturally contaminated and spiked samples. Ultra-fast high-performance liquid chromatography/mass spectrometry (HPLC/MS) was used for the determination of isoflavones on an Atlantis dC18 high-speed reversed phase chromatographic column (20 x 2.1 mm, 3 microm particle size). A newly elaborated supercritical fluid extraction (SFE) procedure allowed more accurate (< 5%) and precise (< 4-7%) determination of isoflavones in biological materials. The HPLC/MS method significantly reduced analysis time with simultaneous improvement of sensitivity and detection limits. The on-column limits of detection LOD (S/N = 3) for isoflavone glycosides (daidzin, genistin, glycitin, ononin, and sissotrin) were 1.3-3.6 fmol and 0.2-1.0 fmol for aglycones (daidzein, glycitein, genistein, formononetin, and biochanin A), respectively.     

Bayesian Approach to Hurst Exponent Estimation

Fractal investigation of a signal often involves estimating its fractal dimension or Hurst exponent H when considered as a sample of a fractional process. Fractional Gaussian noise (fGn) belongs to the family of self-similar fractional processes and it is dependent on parameter H. There are variety of traditional methods for Hurst exponent estimation. Our novel approach is based on zero-crossing principle and signal segmentation. Thanks to the Bayesian analysis, we present a new axiomatically based procedure of determining the expected value of Hurst exponent together with its standard deviation and credible intervals. The statistical characteristics are calculated at the interval level at first and then they are used for the deduction of the aggregate estimate. The methodology is subsequently used for the EEG signal analysis of patients suffering from Alzheimer disease.     

Mössbauer characterization and in situ monitoring of thermal decomposition of potassium ferrate(VI), K2FeO4 in static air conditions

Solid orthorhombic crystals of potassium ferrate(VI) (K(2)FeO(4)) of a high-chemical purity (>99.0%) were characterized by low-temperature (1.5-5 K), high-temperature (463-863 K), and in-field (1.5 K/3 T) M?ssbauer spectroscopy. Potassium ferrate(VI) reveals a Néel magnetic transition temperature (TN) of approximately 3.8 K and a saturation hyperfine magnetic field of 13.8 T at 1.5 K. Spectral line intensities recorded below TN in an external magnetic field of 3 T manifest a perfect antiferromagnetic ordering. For the in situ monitoring of the thermal behavior of K(2)FeO(4), high-temperature M?ssbauer data were combined with those obtained from thermogravimetry, differential scanning calorimetry, and variable-temperature X-ray diffraction measurements. Such in situ approach allowed the identification of the reaction products and intermediates and yielded the first experimental evidence for the participation of CO2 in the decomposition process. As the primary conversion products, KFeO(2) and two potassium oxides in equivalent molar ratio, KO2 and K(2)O, were suggested. However, the KO2 phase is detectable with difficulty as it reacts very quickly with CO2 from air resulting in the formation of K(2)CO(3). The presented decomposition model is consistent with thermogravimetric data giving the mass loss of 8.0%, which corresponds to the participation of 1/6 mol of CO2 and liberation of 3/4 mol of O2 per 1 mol of K(2)FeO(4) (K(2)FeO(4) + 1/6CO2 --> KFeO(2) + 1/3K(2)O + 1/6K(2)CO(3) + 3/4O2). An explanation of the multistage reaction mechanism has an important practical impact for the optimization of the solid-state synthesis of potassium ferrate(VI).     

Regioselective upper rim substitution of calix[4]arenes

The electrophilic substitution of 25,27-dipropoxy-26,28-dinosyloxycalix[4]arene leads exclusively to the para-substitution of the alkylated phenol rings, while in the next step, the protecting nosyl group can be easily removed using a basic hydrolysis. The overall process yields dialkoxycalix[4]arenes with the substitution on the alkylated rings—the substitution pattern, which is complementary to the common dialkoxycalix[4]arenes with substituted nonalkylated phenolic units. The usefulness of this protection/deprotection procedure was documented by the synthesis of novel type of calixarene dipropoxy derivatives, and by the preparation of a novel anion receptor based on this substitution pattern.