Quantum mechanical calculations of conformationally relevant 1H and 13C NMR chemical shifts of calixarene systems

[graphs: see text] QM GIAO calculations of 13C and 1H chemical shift values of the ArCH2Ar group have been performed, using the hybrid DFT functional MPW1PW91 and the 6-31G(d,p) basis set, on some representative calixarenes and on a series of simplified calixarene models allowing derivation of chemical shift surfaces versus phi and chi dihedral angles. A good reproduction of experimental data was obtained. The applicability of chemical shift surfaces in the study of calixarene conformational features is illustrated.     

Uncharged water-soluble Co(II)-porphyrin: a receptor for aromatic alpha-amino acids

Changes in the UV-vis spectra and induced circular dichroism (ICD) signals observed, in correspondence with the porphyrin Soret region, for aqueous solutions of achiral 5,10,15,20-tetrakis{p-[omega-methoxy poly(oxy-ethylene)]phenyl}porphyrin cobalt (II) (Co-P) and aromatic alpha-L-amino acids (Trp and Phe) give direct evidence for the coordination between the Co-P and amino acids. Considering that Co-P, besides the Co atom (one-fixation-point system), does not contain in the molecule active ligand groups and that no ICD signals have been observed in the case of Co-P/Ala, it has been concluded that hydrophobic interactions or stacking interactions between the aromatic rings of the porphyrin and those of Trp or Phe, acting as further amino acid (AA) fixation points, can strongly reduce the mobility of the chiral guest, thus permitting the generation of ICD signals. The effects of changes of both pH (in the range 2-9) and amino acid structure on the ICD phenomenon have also been investigated. In particular, the following have been observed: (i) strong ICD signals for all of the Co-P/N-acetyl amino acid aqueous solutions at pH 7, (ii) an unexpected ICD band with a bisignate form for the Co-P/Ala solution at pH 9 after long aging, and (iii) an opposite ICD signal when alpha-D-Phe and alpha-D-Trp enantiomers have been used. The data reported in this paper show how the binding mechanism between receptor and AAs changes by modulating properly the pH or the molecular structures and indicate that in these aqueous solutions the coordination Co-N is not the fundamental mechanism giving rise to the formation of the complexes and that the binding can be driven by hydrophobic interactions. These occurrences, through the analysis of the spectroscopic response (and, in particular, the form of the ICD band), can allow the recognition of AAs.     

Hydrophobic interaction chromatography coupled with atomic fluorescence spectrometric detection Effect of the denaturation on the determination of thiolic proteins

Hydrophobic interaction chromatography coupled online with chemical vapour atomic fluorescence spectrometry (HIC-CVGAFS) has been optimized for the analysis of thiolic proteins in denaturing conditions. Proteins are pre-column simultaneously denatured and derivatized in phosphate buffer solution containing 8.0 mol dm⁻³ urea and p-hydroxymercurybenzoate (PHMB) and the derivatized denatured proteins are separated on a silica HIC Eichrom Propyl column in the presence of 8.0 M urea in the mobile phase. Post-column online reaction of derivatized denatured proteins with bromine, generated in situ by KBr/KBrO₃ in HCl medium, allowed the fast conversion of the uncomplexed PHMB and of the PHMB bound to proteins to inorganic mercury also in presence of urea. Hg²⁺, present in solution as Hg²⁺-urea complex, is selectively detected by AFS in a Ar/H₂ miniaturized flame after sodium borohydride reduction to Hg. Under optimized conditions, online bromine treatment gives a 100±2% recovery of both free and protein-complexed PHMB. Denatured glyceraldehyde-3-phosphate dehydrogenase, aldolase, lactate dehydrogenase, trioso phosphate isomerase and β-lactoglobulin have been examined. As the sensitivity and limit of detection of proteins in the HIC-CVGAFS apparatus depends on number of SH groups reacting with PHMB, the denaturation process, which increases the number of PHMB-reactive thiolic groups in proteins, improves the analytical performances of the described system in protein analysis. The detection limit for the denatured proteins examined was found in the range of 10⁻¹⁰-10⁻¹² mol dm⁻³, depending on the considered protein, with linear calibration curves spanning over four decades of concentration.     

S-Adenosyl methionine/S-adenosyl-L-homocysteine ratio determination by capillary electrophoresis employed as a monitoring tool for the antiviral effectiveness of adenosine analogs

S-Adenosyl-L-homocysteine hydrolase (SAHh) inhibitors have long been used as broad-range antivirals and have been recently evaluated as an experimental therapy of filovirus infections. In response to the need for a rapid laboratory testing method that could assess antiviral potency in vivo, our group developed a capillary electrophoresis (CE) method for the determination of the S-adenosyl-L-homocysteine (SAH) to S-adenosyl-L-methionine (SAM) ratio. After chloroacetaldehyde derivatization, SAH and SAM were detected using laser-induced fluorescence detection with a HeCd laser. Separation and quantitation of both SAH and SAM in human plasma were achieved in less than 1 min. The proposed method is rapid and reliable, and could be easily applied to routine monitoring of clinical and preclinical trials subjects.     

Atropisomerism in 1,5-bridged calix[8]arenes

[structure: see text] The first example of two discrete calix[8]arene conformational isomers, 2 and 2a, has been obtained by exhaustive benzylation of 1,5-tetramethylene-bridged calix[8]arene 1. It is demonstrated, with the aid of X-ray crystallography, that these atropisomers have two 3/4-cone halves oriented syn or anti with respect to the bridge/bridgeheads moiety. VT NMR studies indicate that the tert-butyl-through-the-annulus inversion is inhibited in 1, while groups larger than n-hexyl or benzyl are required for curtailing the O-through-the-annulus route.     

Effect of delay time and grid voltage changes on the average molecular mass of polydisperse polymers and polymeric blends determined by delayed extraction matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

The dependence of the calculated average molecular mass of a polyethylene glycol with a large polydispersity on the instrumental parameters adopted in the acquisition of mass spectra using delayed extraction matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (DE MALDI-TOFMS) was investigated. It has been shown that a combined effect of delay times and potential gradients can act on the ion cloud in the source chamber affecting both mass resolution and average molecular mass value of the analyzed polymeric sample. Also examined was a blend of two different polymers (a PEG and a PMMA commercial sample having a similar average molecular mass), which presents an additional problem concerning the discrimination among the different polymer species as a function of the experimental conditions. In this work, the best instrumental conditions to obtain both good resolution and a correct average molecular mass for the examined polydisperse sample are reported.     

Determination of hydrogen sulfide and volatile thiols in air samples by mercury probe derivatization coupled with liquid chromatography-atomic fluorescence spectrometry

A new procedure is proposed for the sampling and storage of hydrogen sulphide (H₂S) and volatile thiols (methanethiol or methyl mercaptan, ethanethiol and propanethiol) for their determination by liquid chromatography. The sampling procedure is based on the trapping/pre-concentration of the analytes in alkaline aqueous solution containing an organic mercurial probe p-hydroxymercurybenzoate, HO-Hg-C₆H₄-COO⁻ (PHMB), where they are derivatized to stable PHMB complexes based on mercury-sulfur covalent bonds. PHMB complexes are separated on a C₁₈ reverse phase column, allowing their determination by liquid chromatography coupled with sequential non-selective UV-vis (DAD) and mercury specific (chemical vapor generation atomic fluorescence spectrometry, CVGAFS) on-line detectors. PHMB complexes, S(PHMB)₂CH₃S-PHMB, C₂H₅S-PHMB and C₃H₇S-PHMB, are stable alt least for 12 h at room temperature and for 3 months if stored frozen (−20 °C).The best analytical figures of merits in the optimized conditions were obtained by CVGAFS detection, with detection limits (LODc) of 9.7 μg L⁻¹ for H₂S, 13.7 μg L⁻¹ for CH₃SH, 17.7 μg L⁻¹ for C₂H₅SH and 21.7 μg L⁻¹ for C₃H₇SH in the trapping solution in form of RS-PHMB complexes, the relative standard deviation (R.S.D.) ranging between 1.0 and 1.5%, and a linear dynamic range (LDR) between 10 and 9700 μg L⁻¹. Conventional UV absorbance detectors tuned at 254 nm can be employed as well with comparable R.S.D. and LDR, but with LODc one order of magnitude higher than AFS detector and lower specificity. The sampling procedure followed by LC-DAD-CVGAFS analysis has been validated, as example, for H₂S determination by a certified gas permeation tube as a source of 3.071 ± 0.154 μg min⁻¹ of H₂S, giving a recovery of 99.8 ± 7% and it has been applied to the determination of sulfur compounds in real gas samples (biogas and the air of a plant for fractional distillation of crude oil).     

Light propagation in 1D photonic crystals with dissipation

Light propagation in one-dimensional (1D) photonic crystals with dissipation (including metal layers) is studied analytically. The proper effective refractive indices and extinctions of dissipative layers in case of oblique incidence are introduced. Then, the formalism available for nondissipative photonic crystals is modified by replacing the conventional refractive indices with effective ones. Propagation in a bilayer dielectric-metallic crystal is computed as an example.     

Oxygenation of calixarene phenol rings

[structure: see text] The first examples of epoxy-p-quinol and diepoxy-p-quinol calixarene derivatives have been obtained by base-promoted direct addition of O(2)(oxygenation) to calixarene phenol rings. The regio- and stereochemistry of these derivatives was determined by 2D NMR studies, in conjunction with MM3 calculations, and X-ray crystallography. Both the oxygenation and the subsequent carbonyl reduction occur with a preferential attack to the less hindered exo face of the calixarene rings.     

Flow injection-chemical vapor generation atomic fluorescence spectrometry hyphenated system for organic mercury determination: A step forward

Monomethylmercury and ethylmercury were determined on line using flow injection-chemical vapor generation atomic fluorescence spectrometry without neither requiring a pre-treatment with chemical oxidants, nor UV/MW additional post column interface, nor organic solvents, nor complexing agents, such as cysteine. Inorganic mercury, monomethylmercury and ethylmercury were detected by atomic fluorescence spectrometry in an Ar/H₂ miniaturized flame after sodium borohydride reduction to Hg⁰, monomethylmercury hydride and ethylmercury hydride, respectively. The effect of mercury complexing agent such as cysteine, ethylendiaminotetracetic acid and HCl with respect to water and Ar/H₂ microflame was investigated.The behavior of inorganic mercury, monomethylmercury and ethylmercury and their cysteine-complexes was also studied by continuous flow-chemical vapor generation atomic fluorescence spectrometry in order to characterize the reduction reaction with tetrahydroborate. When complexed with cysteine, inorganic mercury, monomethylmercury and ethylmercury cannot be separately quantified varying tetrahydroborate concentration due to a lack of selectivity, and their speciation requires a pre-separation stage (e.g. a chromatographic separation). If not complexed with cysteine, monomethylmercury and ethylmercury cannot be separated, as well, but their sum can be quantified separately with respect to inorganic mercury choosing a suitable concentration of tetrahydroborate (e.g. 10^? 5 mol L^? 1), thus allowing the organic/inorganic mercury speciation.The detection limits of the flow injection-chemical vapor generation atomic fluorescence spectrometry method were about 45 nmol L^? 1 (as mercury) for all the species considered, a relative standard deviation ranging between 1.8 and 2.9% and a linear dynamic range between 0.1 and 5 μmol L^? 1 were obtained. Recoveries of monomethylmercury and ethylmercury with respect to inorganic mercury were never less than 91%. Flow injection-chemical vapor generation atomic fluorescence spectrometry method was validated by analyzing the TORT-1 certificate reference material, which contains only monomethylmercury, and obtaining 83 ± 5% of monomethylmercury recovered, respectively. This method was also applied to the determination of monomethylmercury in saliva samples.