Crack path instabilities in DCDC experiments in the low speed regime

We studied the low speed fracture regime (10⁻⁴-10⁻⁹ m s⁻¹) in different glassy materials (soda-lime glass, glass ceramics) with variable but controlled length scale of heterogeneity. The chosen mechanical system enabled us to work in pure mode I (tensile) and at a fixed load on double cleavage drilled compression specimen. The internal residual stresses of studied samples were carefully relaxed by appropriate thermal treatment. By means of optical and atomic force microscopy techniques fracture surfaces have been examined. We have shown for the first time that the crack front line underwent an out-of-plane oscillating behavior as a result of a reproducible sequence of instabilities. The wavelength of such a phenomenon is in the micrometer range and its amplitude in the nanometer range. These features were observed for different glassy materials providing that a typical length scale characterizing internal heterogeneities was lower than a threshold limit estimated to few nanometers. This effect is the first clear experimental evidence of crack path instabilities in the low speed regime in a uniaxial loading experiment. This phenomenon has been interpreted by referring to the stability criterion for a straight crack propagation as presented by Adda-Bedia et al. [Phys. Rev. Lett. 76 (1996) 1497].     

Tribological properties of ormosil coatings

Transparent plastics are not scratch resistant. The damage leads to a loss of optical properties. Coatings prepared using either tetraethoxysilane or colloidal silica particles embedded in glymo is a way to avoid these disadvantages. Tribological experiments are carried out to better understand the surface modification due to a sliding friction. It is shown that the wear track is not directly related to usual mechanical properties such as Young's modulus and the hardness of the coating. The different stages leading to material loss are discussed in term of particle removal and debris circulation (accumulation or elimination) through the friction track. The mechanical properties of the film combined with the film to substrate adhesion are expected to play an important role as it can be deduced from results obtained as a function of the coating composition.     

Raman study of structural defects in SiO2 aerogels

The structure of the silica aerogels was studied by Raman spectroscopy. The spectra of the solid network resembles that of bulk silica with additional bands related to organic groups and a large amount of OH groups.The typical bands due to ring breathing also called defect bands D ₁ and D ₂ located at 490 and 610 cm^–1 are present. However, the evolution of the D ₂ band compared to that of OH band (980 cm^–1) seems apparently, in contradiction with the results previously reported in the literature. During heat treatments between 25 and 300°C the D ₂ and the OH bands increase simultaneously. Generally, in silica glass the defect band D ₂ grows at the expense of the OH groups.This result is explained by the oxidation of the organic compounds which, in this temperature range, leads to the formation of the both species (OH) and those related to siloxane rings. ²⁹Si MAS NMR results are in agreement with the Raman study.     

The sintering of silica aerogels studied by thermoporometry

The evolution of the texture of silica aerogels during sintering is studied by thermoporometry for both neutral and base catalysed materials.During the densification the macroporous volume drops and the analysis of the mesopore size distribution evolution shows that the collapse of the smallest mesopores is responsible for the macropore volume transformation. However, corrections of the measured volumes are necessary to characterize the most compliant materials.     

Diagnostics of laser-induced plasma with soft X-ray (13.9 nm) bi-mirror interference microscopy

X-ray interference microscopy diagnostics of a nanosecond-pulse pumped Al (Z=13) plasma are presented. A transient picosecond Ni-like Ag X-ray laser (13.9 nm) is used as the probe beam and a wavefront division bi-mirror interferometer is adopted as the diagnosis tool. From the fringe shifts, the two-dimensional plasma density profile at 1 ns after the peak of the heating pulse is deduced. Opposite fringe shifts during the plasma development are observed and possible explanations for this behavior are discussed. This study will contribute to the validation of 1D and 2D hydrodynamic codes as well as to the better understanding of the physics during the development of laser produced plasmas. PACS 41.50.+h; 41.85.Ew; 42.55.Vc     

Brittle Fracture of Aerogels: Stress Corrosion in Alcoholic Environment

The mechanical behaviour of silica aerogels in alcoholic environment has been interpreted in terms of stress corrosion in analogy with silica glass. The chemical susceptibility factor has been determined by the dynamical method and we also measured the Weibull’s modulus which characterizes the strength distribution. These data show a stress corrosion effect which is significant in alcoholic atmosphere. The results could explain a possible fracture of gels during the supercritical drying treatment as already observed.     

Comparison between flexural and uniaxial compression tests to measure the elastic modulus of silica aerogel

The Young’s moduli of a set of silica aerogels have been measured by two techniques: 3-point bending and uniaxial compression. The data found by the two methods differ strongly. The uniaxial compression test gives generally underestimated values of Young’s modulus, because of geometrical effects. The appropriate gauge lengths were estimated based on the discussion of Euler buckling and nonuniform stress distribution. The measured compressive moduli were analyzed to correct for machine compliance and possible misalignment under compression of the aerogels. Similarly, moduli obtained by 3-point bending depend on the length/thickness ratio of the sample, reaching equilibrium only for ratios above about 10. The corrected compressive moduli were comparable to those measured by 3-point bending on samples of sufficient length.     

Mechanical strength of silica aerogels

Pure silica aerogels are obtained by hypercritical evacuation of the solvent. The strength is measured by the three-point flexural test on monolithic parallelepipedic samples and by a diametral compression test on cylindrical samples. The stress-strain curve shows a perfect elastic behaviour and the “conchoidal” fracture morphology indicates that the material is as brittle as a conventional glass. The mechanical properties are followed as a function of the bulk density. Aerogels with the highest porosity (P > 95%) reveal a maximum flexural strength lower than 10⁻² MPa. A model is proposed to account for the obtained mechanical properties.     

Mechanical Properties of Gel-Derived Materials

The mechanical behaviour of xerogels and aerogels is generally described in terms of brittle and elastic materials, like glasses or ceramics. The main difference compared to silica glass is the order of magnitude of the elastic and rupture moduli which are 10⁴ times lower. However, if this analogy is pertinent when gels are under a tension stress (bending test) they exhibit a more complicated response when the structure is submitted to a compressive stress. The network is linearly elastic under small strains, then exhibits yield followed by densification and plastic hardening. As a consequence of the plastic shrinkage it is possible to densify and stiffen the gel at room temperature. These opposite behaviours (elastic and plastic) are surprisingly related to the same two kinds of gel features: the silanol content and the pore volume. Both elastic modulus and plastic shrinkage depend strongly on the volume fraction of pores and on the condensation reaction between silanols. On the mechanical point of view (rupture modulus and toughness), it is shown that pores and silanols play also an important role. Pores can be considered as flaws in the terms of fracture mechanics and the flaw size, calculated from rupture strength and toughness is related to the pore size distribution. Different kinds of gels structure (fractal or not fractal) have been synthesized by a control of the different steps of transformation such as sintering and plastic compaction. The relationships between structural and the elastic properties are discussed in terms of the percolation theory and fractal structure.