Determination of low levels of an antioxidant in polyolefins by large-volume injection temperature-programmed packed capillary liquid chromatography

Sub-ambient column temperatures, promoting strong interactions between the analyte and the stationary phase material, were utilized to focus large volumes of the polyolefin antioxidant Irganox 1076 [benzenepropanoic acid, 3.5-bis(1,1-dimethylethyl)-4-hydroxy-, octadecyl ester] on the column inlet, using pure acetonitrile as sample solvent and mobile phase. Injection volumes up to 100 microl were successfully employed on a 50 cm x 320 microm I.D. capillary column packed with 5 microm Kromasil 100 ODS particles. Irganox 1076 was eluted after completed injection by temperature programming, using a temperature program from 7 to 90 degrees C, in 3 degrees C min(-1). UV detection, using a low-dispersion "U"-shaped flowcell, was performed at 280 nm. The method was applied for the determination of Irganox 1076 that was extracted from low-density polyethylene (0.6 ppm, w/w). Both Soxhlet and microwave-aided solvent extractions were performed, using chloroform and acetonitrile as solvents, respectively. The microwave-aided extraction with acetonitrile was found to give approximately the same yield as the standard Soxhlet reference method. Consequently, small volumes of acetonitrile could be used both as extraction solvent, sample solvent and mobile phase, simplifying the analysis process. The mass limit of detection of the method was found to be 3.3 ng, corresponding to a concentration limit of detection of 33 ng ml(-1), utilizing an injection volume of 100 microl. The within and between day precision of retention times displayed relative standard deviations below 1.2%.     

Stability of workroom air volatile organic compounds on solid adsorbents for thermal desorption gas chromatography

The storage stability of the occupationally frequently occurring compounds, methylethylketone, methylisobutylketone, benzene, toluene, tetrachloroethylene, n-butylacetate, -pinene, β-pinene, limonene and n-decane, has been investigated on the adsorbents Tenax TA, Chromosorb 106 and Carbotrap using thermally desorbable tube type samplers, commonly utilized in ambient and workroom atmospheric measurements. Fifty and 500 ng of each compound were loaded on the various adsorbents tubes, stored at both ambient (20 °C) and refrigerated (4 °C) temperatures and analysed by means of thermal gas chromatography with mass spectrometric detection on days 0, 7, 14 and 28 after exposure. A 90% storage recovery was chosen as acceptance criteria for storage stability, and statistical testing by Student's t-test, analysis of variance and Bonferroni post hoc tests were employed to investigate the effect of the categorical variables storage time, storage temperature and analyte loading on the different adsorbents. Chromosorb 106 showed the overall best behaviour with recoveries of 90% or better for all analytes during the 28-day test period. Tenax TA and Carbotrap yielded lower recoveries and were more influenced by variations in storage time, storage temperature and analyte loading. Refrigerated temperatures were best avoided for storage on Tenax TA, but may increase the recovery of some compounds on Carbotrap (e.g. n-butylacetate). The blank build-up on the adsorbents was also investigated, and Carbotrap and Tenax TA showed no signs of artefact development over time. Chromosorb 106, however, contained inherently more artefacts that build up over time, which in spite of the excellent storage capability, may limit its use in field studies where long storage times are normal.     

Toward a general route to the eunicellin diterpenes: the asymmetric total synthesis of deacetoxyalcyonin acetate

A novel approach to the hydroisobenzofuran core utilizing a TiCl4-mediated [4+3] annulation is reported. This [4+3] annulation protocol provides a short, general route to the hydroisobenzofuran core present in the eunicellin diterpenes. Using this annulation, a short synthesis (17 steps) of deacetoxyalcyonin acetate, a member of the eunicellin family, has been achieved.     

A diastereoselective intramolecular hydroamination approach to the syntheses of (+)-, (+/-)-, and (-)-pinidinol

A diastereoselective, lanthanocene-catalyzed, intramolecular hydroamination reaction was applied to the preparation of 2,6-disubstituted piperidines. Various metal/ligand arrays in the catalysts were examined using a model substrate to allow optimization of the diastereoselectivity. It was determined that the relationship between metal size and ligand bulk plays an integral role in the transformation. The complex Cp2NdCH(TMS)2 converted 2-substituted 8-nonen-4-amines to 2,6-disubsituted piperidines with greater than 100:1 selectivity for the formation of the cis isomer. A short synthesis of pinidinol, an alkaloid isolated from various pine and spruce species, was then carried out to exploit this stereoselective reaction.     

Expanding organoboron chemistry: epoxidation of potassium organotrifluoroborates

Most organoboron reagents are highly susceptible to oxidation by a variety of oxidants. In these processes, the valuable carbon-boron bond is cleaved. The organotrifluoroborates examined in this contribution appear resistant to many common oxidants. Consequently, thioether-substituted alkyltrifluoroborates can be oxidized to the corresponding sulfones, while retaining the trifluoroborate moiety. 1-Trifluoroboratoalkenes are oxidized by dioxirane, providing air-stable, crystalline oxiranyltrifluoroborates. These interesting materials are structurally analogous to oxiranyl anions, unstable intermediates that would otherwise be of tremendous synthetic utility. Finally, the first Suzuki-Miyaura coupling of an epoxytrifluoroborate has been accomplished. The chemistry described begins to expand organoboron chemistry in significant new directions.     

Palladium-catalyzed, direct boronic acid synthesis from aryl chlorides: a simplified route to diverse boronate ester derivatives

Although much current research focuses on developing new boron reagents and identifying robust catalytic systems for the cross-coupling of these reagents, the fundamental preparations of the nucleophilic partners (i.e., boronic acids and derivatives) has been studied to a lesser extent. Most current methods to access boronic acids are indirect and require harsh conditions or expensive reagents. A simple and efficient palladium-catalyzed, direct synthesis of arylboronic acids from the corresponding aryl chlorides using an underutilized reagent, tetrahydroxydiboron B(2)(OH)(4), is reported. To ensure preservation of the carbon-boron bond, the boronic acids were efficiently converted to the trifluoroborate derivatives in good to excellent yields without the use of a workup or isolation. Further, the intermediate boronic acids can be easily converted to a wide range of useful boronates. Finally, a two-step, one-pot method was developed to couple two aryl chlorides efficiently in a Suzuki-Miyaura-type reaction.