Rugged distal tips for CO2 laser medicine

Low-loss and rugged distal tips for CO₂ laser have been proposed and fabricated based on a commercially available stainless steel (St) pipe. A method of smoothening the inner surface of the St pipe with a rough inner surface is put forward. Fabrication parameters, transmission properties, and mechanical strength of the cyclic olefin polymer-coated silver hollow St distal tip are experimentally discussed.     

Improved coating method for uniform polymer layer in infrared hollow fiber

An improved coating method was proposed in order to form a uniform polymer layer in the fabrication of cyclic olefin polymer-coated silver (COP/Ag) hollow fiber. A COP solution was flowed in a closed loop, in which the silver-coated tube was used as a part of the loop. Owing to the constant flowing speed of the COP solution and the airtight flowing environment, a COP layer was uniformly formed. The hollow fibers attain high performance and deliver multi-wavelength laser light from the infrared to the visible simultaneously. The method was successfully applied to the fabrication of practical hollow fibers with 2 m length for the near and mid-infrared lasers.     

Drug–tea polyphenol interaction

Propericiazine (PCZ) is an antipsychotic agent used for the treatment and the prevention of relapse of schizophrenia. We found that when an oral solution containing PCZ was mixed with a green tea drink, the residual content of PCZ was reduced by forming an insoluble complex between PCZ and tea polyphenol. In this study, the mechanism underlying the incompatibility of PCZ with green tea polyphenol (GTP) in the solution was clarified by isothermal titration microcalorimetry (ITC). Both solutions of 27.4 mM PCZ and 2.2 mM (?)-epigallocatechin gallate (EGCg), which is a main ingredient of GTP, were mixed and then PCZ in the filtrate was reduced to approximately 60 %. According to measurement at 298 K by ITC, PCZ formed an insoluble complex with EGCg at an associate constant (K) of 4.75 × 10² M^?1 exothermically, ΔH = ?40.0 kJ mol^?1. When (?)-epicatechin gallate (ECg) was used as the GTP, PCZ interacted with ECg with K and ΔH values of 3.74 × 10² M^?1 and ?22.1 kJ mol^?1, respectively. On the other hand, little heat of the reaction between PCZ and (?)-epigallocatechin or (?)-epicatechin was observed. The results indicated that the main reason for this incompatibility was the formation of an insoluble complex by PCZ and a gallate-type GTP such as EGCg and ECg in the aqueous solution.     

Well‐Defined Iron Complexes as Efficient Catalysts for “Green” Atom‐Transfer Radical Polymerization of Styrene,Methyl Methacrylate,and Butyl Acrylate with Low Catalyst Loadings and Catalyst Recycling

Environmentally friendly iron(II) catalysts for atom‐transfer radical polymerization (ATRP) were synthesized by careful selection of the nitrogen substituents of N,N,N‐trialkylated‐1,4,9‐triazacyclononane (R₃TACN) ligands. Two types of structures were confirmed by crystallography: “[(R₃TACN)FeX₂]” complexes with relatively small R groups have ionic and dinuclear structures including a [(R₃TACN)Fe(μ‐X)₃Fe(R₃TACN)]⁺ moiety, whereas those with more bulky R groups are neutral and mononuclear. The twelve [(R₃TACN)FeX₂]_n complexes that were synthesized were subjected to bulk ATRP of styrene, methyl methacrylate (MMA), and butyl acrylate (BA). Among the iron complexes examined, [{(cyclopentyl)₃TACN}FeBr₂] ( 4 b ) was the best catalyst for the well‐controlled ATRP of all three monomers. This species allowed easy catalyst separation and recycling, a lowering of the catalyst concentration needed for the reaction, and the absence of additional reducing reagents. The lowest catalyst loading was accomplished in the ATRP of MMA with 4 b (59 ppm of Fe based on the charged monomer). Catalyst recycling in ATRP with low catalyst loadings was also successful. The ATRP of styrene with 4 b (117 ppm Fe atom) was followed by precipitation from methanol to give polystyrene that contained residual iron below the calculated detection limit (0.28 ppm). Mechanisms that involve equilibria between the multinuclear and mononuclear species were also examined.     

Four guaianolides from Sinodielsia yunnanensis

Four new guaianolides, sinodielides A-D (1-4), were isolated from Sinodielsia yunnanensis WOLFF together with a known polyacetylene, falcarindiol, and two known coumarins, bergapten and scopoletin. Their structures were established by spectral and X-ray analyses.     

Optimal design for hollow fiber inner-coated by dielectric layers with surface roughness

We report the optimal design for hollow fiber inner-coated with metallic and multidielectric layers by using ray-optics theory. Transmission characteristics of the multilayer hollow fiber are more dependent on the film surface roughness in the IR region. Comparisons of fibers with smooth and rough films are made and discussed in detail. The optimal design for film thickness, inner radius, and the number of layers and refractive indices is presented. The calculation results are important for structure design, material selection, and fabrication when considering imperfections in film-coating techniques. Multilayer fibers are fabricated based on the calculation and experimental results agree with the theoretical ones.