Investigating laser rapid manufacturing for Inconel-625 components

This paper presents an investigation of laser rapid manufacturing (LRM) for Inconel-625 components. LRM is an upcoming rapid manufacturing technology, it is similar to laser cladding at process level with different end applications. In general, laser-cladding technique is used to deposit materials on the substrate either to improve the surface properties or to refurbish the worn out parts, while LRM is capable of near-net shaping the components by layer-by-layer deposition of the material directly from CAD model. In the present study, a high-power continuous wave (CW) CO₂ laser system, integrated with a co-axial powder-feeding system and a three-axis workstation were used. The effect of processing parameters during LRM of Inconel-625 was studied and the optimum set of parameters for the maximum deposition rate was established employing Orthogonal L9 array of Taguchi technique. Results indicated that the powder feed rate and the scan speed contributed about 56% and 26%, respectively to the deposition rate, while the influence of laser power was limited to 10% only. Fabricated components were subjected to non-destructive testing (like—ultrasonic testing, dye-penetrant testing), tensile testing, impact testing, metallographic examinations and micro-hardness measurement. The test results revealed defect-free material deposition with improved mechanical strength without sacrificing the ductility.     

An Efficient, One-Pot Synthesis of Carbamates from the Corresponding Alcohols Using Mitsunobu’s Reagent

A novel Mitsunobu-based protocol was developed for the synthesis of carbamates from the corresponding alcohols using carbon dioxide and amines in good to excellent yields. This protocol is mild, chemoselective, and efficient compared to other reported methods.     

Cyclopolymerization of diallylamine derivatives in dimethyl sulfoxide

Diallyl quaternary ammonium chlorides, bromides and N-alkyldiallylamine hydrochlorides were polymerized with ammonium persulfate (APS) in dimethyl sulfoxide (DMSO). The dependences of yield and molecular weight of polymers on polymerization conditions were examined and quaternary ammonium chlorides were found to have better polymerizability than bromides. The poly(diallyl quaternary ammonium chlorides) obtained with APS—DMSO system are expected to have quite high molecular weights, as determined from the measurement of limiting viscosity numbers of the polymers in NaCl aqueous solution.     

Complexes of poly(ethylene glycol)-based cationic random copolymer and calf thymus DNA: a complete biophysical characterization

Complete biophysical characterization of complexes (polyplexes) of cationic polymers and DNA is needed to understand the mechanism underlying nonviral therapeutic gene transfer. In this article, we propose a new series of synthesized random cationic polymers (RCPs) from methoxy poly(ethylene glycol) monomethacrylate (MePEGMA) and (3-(methacryloylamino)propyl)trimethylammonium chloride with different mole ratios (32:68, 11:89, and 6:94) which could be used as a model system to address and answer the basic questions relating to the mechanism of the interaction of calf thymus DNA (CT-DNA) and cationic polymers. The solubility of the complexes of CT-DNA and RCP was followed by turbidity measurements. It has been observed that complexes of RCP with 68 mol % MePEGMA precipitate near the charge neutralization point, whereas complexes of the other two polymers are water-soluble and stable at all compositions. Dnase 1 digestion experiments show that DNA is inaccessible when it forms complexes with RCP. Ethidium bromide exclusion and gel electrophoretic mobility show that both polymers are capable of binding with CT-DNA. Atomic force microscopy images in conjunction with light scattering experiments showed that the complexes are spherical in nature and 75-100 nm in diameter. Circular dichroism spectroscopy studies indicated that the secondary structure of DNA in the complexes is not perturbed due to the presence of poly(ethylene glycol) segments in the polymer. Furthermore, we used a combination of spectroscopic and calorimetric techniques to determine complete thermodynamic profiles accompanying the helix-coil transition of CT-DNA in the complexes. UV and differential scanning calorimetry melting experiments revealed that DNA in the complexes is more stable than in the free state and the extent of stability depends on the polymer composition. Isothermal titration calorimetry experiments showed that the binding of these RCPs to CT-DNA is associated with small exothermic enthalpy changes. A complete thermodynamic profile showed that the RCP/DNA complex formation is entropically favorable. Much broader opportunities to vary the architecture of the polymers studied here make these systems promising in addressing various basic and practical problems in gene delivery systems.     

Synthesis of some novel substituted quinolines as potent analgesic agents

Summary 2-Chloroquinoline-3-carbaldehyde and 2-chloro-4-methylquinoline-3-carbaldehyde have been prepared from acetanilide and acetoacetanilidevia a Vilsmeier-Haack reaction. Upon reaction with phenyl hydrazine, hydroxylamine, urea, and thiourea in presence of acetic acid, these chloroaldehydes afforded the title compounds which exhibit a several times higher analgesic activity than noramidopyrine (NAP).

---

Synthese einiger neuer substituierter Chinoline als stark analgetisch wirkende Substanzen

Zusammenfassung 2-Chlorchinolin-3-carbaldehyd und 2-Chlor-4-methylchinolin-3-carbaldehyd wurden, ausgehend von Acetanilid und Acetylacetanilid, über eineVilsmeier-Haack-Reaktion hergestellt. Reaktion dieser chlorsubstituierten Aldehyde mit Phenylhydrazin, Hydroxylamin, Harnstoff und Thioharnstoff ergab die Titelverbindungen, deren analgetische Aktivität jene von Noramidopyrin (NAP) um ein Mehrfaches übertrifft.

     

Morphology and oxygen sensor response of luminescent Ir-labeled poly(dimethylsiloxane)/polystyrene polymer blend films

Polymer films consisting of a linear poly(dimethylsiloxane) end-functionalized with a luminescent Ir(III) complex (Ir-PDMS), blended with polystyrene (PS), function as optical oxygen sensors. The sensor response arises by quenching of the luminescence from the Ir(III) chromophore by oxygen that permeates into the polymer film. The morphology and luminescence oxygen sensor properties of blend films consisting of Ir-PDMS and PS have been characterized by fluorescence microscopy, atomic force microscopy, and scanning electron microscopy. The investigations demonstrate that microscale phase segregation occurs in the films. In blends that contain a relatively small amount of Ir-PDMS in PS (ca. 10 wt %), the Ir-PDMS exists as circular domains, with diameters ranging from 2 to 5 mum, surrounded by the majority PS phase. For larger weight fractions of Ir-PDMS in the blends, the film morphology becomes bicontinuous. A novel epifluorescence microscopy method is applied that allows the construction of Stern-Volmer quenching images that quantify the oxygen sensor response of the blend films with micrometer spatial resolution. These images provide a map of the oxygen permeability of the polymer blend films with a spatial resolution of ca. 1 mum. The results of this investigation show that the micrometer-sized Ir-PMDS domains display a 2-3-fold higher oxygen sensor response compared to the surrounding PS matrix. This result is consistent with the fact that PDMS is considerably more gas permeable compared to PS. The relationship of the microscale morphology of the blends to their performance as macroscale optical oxygen sensors is discussed.     

A study of equilibrium between cadmium cyanide and alkali halides and thiocyanate by solubility measurements

Summary A study of the Cd(CN)₂ +x X^– [Cd(CN)₂X _x ] ^x– equilibrium (where X = Cl, Br or CNS) has been carried out at 18° and 38° by measuring the solubility of cadmium cyanide in potassium chloride, bromide and thiocyanate at various concentrations, and at a high ionic strength (6 M) maintained with sodium perchlorate to minimise the effect of activity coefficients. Equilibrium constants forx = 1 and 2 have been calculated and clearly favour the situation wherex = 1. H values for the dissociation of [Cd(CN)₂X]^– have also been calculated.     

Trans --> cis isomerization of trans-[(dppm)2Ru(H)(L)][BF4] (L = P(OR)3) complexes: preparation of cis-[(dppm)2Ru(eta2-H2)(L)][BF4]2

A series of new dicationic dihydrogen complexes of ruthenium of the type cis-[(dppm)(2)Ru(eta(2)-H(2))(L)][BF(4)](2) (dppm = Ph(2)PCH(2)PPh(2); L = P(OMe)(3), P(OEt)(3), PF(O(i)Pr)(2)) have been prepared by protonating the precursor hydride complexes cis-[(dppm)(2)Ru(H)(L)][BF(4)] (L = P(OMe)(3), P(OEt)(3), P(O(i)Pr)(3)) using HBF(4).Et(2)O. The cis-[(dppm)(2)Ru(H)(L)][BF(4)] complexes were obtained from the trans hydrides via an isomerization reaction that is acid-accelerated. This isomerization reaction gives mixtures of cis and trans hydride complexes, the ratios of which depend on the cone angles of the phosphite ligands: the greater the cone angle, the greater is the amount of the cis isomer. The eta(2)-H(2) ligand in the dihydrogen complexes is labile, and the loss of H(2) was found to be reversible. The protonation reactions of the starting hydrides with trans PMe(3) or PMe(2)Ph yield mixtures of the cis and the trans hydride complexes; further addition of the acid, however, give trans-[(dppm)(2)Ru(BF(4))Cl]. The roles of the bite angles of the dppm ligand as well as the steric and the electronic properties of the monodentate phosphorus ligands in this series of complexes are discussed. X-ray crystal structures of trans-[(dppm)(2)Ru(H)(P(OMe)(3))][BF(4)], cis-[(dppm)(2)Ru(H)(P(OMe)(3))][BF(4)], and cis-[(dppm)(2)Ru(H)(P(O(i)Pr)(3))][BF(4)] complexes have been determined.     

Kinetics of non-isothermal decomposition of acid maleato complexes of some bivalent metals

McGinn et al. [1] and Misra and Naik [2] studied the complexing capacity of maleic acid with metals. Edge [3] reported his findings on the pyrolysis of normal nickel maleato. This note is concerned with the estimation of kinetic parameters of the non-isothermal decomposition of acid maleato complexes of Co(II), Cu(II), Ni(II) and Cd(II).