Structural characterization and thermal degradation of poly(methylmethacrylate)/zinc oxide nanocomposites

This work is based on the preparation of composites of poly(methylmethacrylate) with zinc oxide nanoparticles synthesized by solution casting method.

Chloroform cast poly(methylmethacrylate) films containing different amounts of ZnO nanoparticles were characterized by XRD, SEM, UV-vis spectroscopy, FTIR spectroscopy and TGA.

The results show that ZnO nanoparticles with a size of 24?nm were fairly dispersed in the polymer matrix. The obtained material had UV shielding capability with optical transparency. Thermal characterization shows that, the nanocomposites were more thermally stable than pure PMMA presenting three degradation steps. Apparent kinetic parameters were determined for each degradation step using peak fitting methodology. According to activation energies, ZnO particles affect simultaneously but oppositely the kinetics of underlying degradation reactions. Thermal stability of the PMMA/ZnO nanocomposites was the result of the overall balance in favor of the inhibiting effect of ZnO.     

Quantification of benzene,toluene, ethylbenzene and o-xylene in internal combustion engine exhaust with time-weighted average solid phase microextraction and gas chromatography mass spectrometry

A new and simple method for benzene, toluene, ethylbenzene and o-xylene (BTEX) quantification in vehicle exhaust was developed based on diffusion-controlled extraction onto a retracted solid-phase microextraction (SPME) fiber coating. The rationale was to develop a method based on existing and proven SPME technology that is feasible for field adaptation in developing countries. Passive sampling with SPME fiber retracted into the needle extracted nearly two orders of magnitude less mass (n) compared with exposed fiber (outside of needle) and sampling was in a time weighted-averaging (TWA) mode. Both the sampling time (t) and fiber retraction depth (Z) were adjusted to quantify a wider range of C_gas. Extraction and quantification is conducted in a non-equilibrium mode. Effects of C_gas, t, Z and T were tested. In addition, contribution of n extracted by metallic surfaces of needle assembly without SPME coating was studied. Effects of sample storage time on n loss was studied. Retracted TWA–SPME extractions followed the theoretical model. Extracted n of BTEX was proportional to C_gas, t, D_g, T and inversely proportional to Z. Method detection limits were 1.8, 2.7, 2.1 and 5.2 mg m⁻³ (0.51, 0.83, 0.66 and 1.62 ppm) for BTEX, respectively. The contribution of extraction onto metallic surfaces was reproducible and influenced by C_gas and t and less so by T and by the Z. The new method was applied to measure BTEX in the exhaust gas of a Ford Crown Victoria 1995 and compared with a whole gas and direct injection method.     

Quantification of transformation products of rocket fuel unsymmetrical dimethylhydrazine in air using solid-phase microextraction

Quantification of unsymmetrical dimethylhydrazine transformation products in ambient air is important for assessing the environmental impact of heavy rocket launches. There are very little data of such analyses, which is mainly caused by the low number of analytes covered by the available analytical methods and their complexity. A simple and cost-efficient method for accurate simultaneous determination of seven unsymmetrical dimethylhydrazine transformation products in air using solid-phase microextraction followed by gas chromatography-mass spectrometry was developed. The method was optimized for air sampling and solid-phase microextraction from 20-mL vials, which allows full automation of analysis. The extraction for 5 min by Carboxen/polydimethylsiloxane fiber from amber vials and desorption for 3 min provided the greatest analytes' responses, lowest relative standard deviations, linear calibration (R² ≥ 0.99), and limits of detection from 0.12 to 0.5 μg/m³. Samples with concentrations 500 μg/m³ can be stored at 21 ± 1°C without substantial losses (1–11%) for up to 24 h, while air samples with concentrations 10 and 50 μg/m³ stored for up to 24 h can be used for accurate quantification of only two and four out of seven analytes, respectively. The developed method was successfully tested for the analysis of air above real soil samples contaminated with unsymmetrical dimethylhydrazine rocket fuel.     

A mixed valence manganese triangle in a trigonal lattice: structure and magnetism

The synthesis, structural and magnetic characterisation of trinuclear manganese cluster, [Mn(3)O(O(2)C-anth)(6)(HOCH(3))(3)] 1 (where O(2)C-anth = 9-anthracenecarboxylate), with crystallographic three-fold (C(3)) symmetry, are described. The cluster was prepared by a carboxylate exchange reaction between HO(2)C-anth and [Mn(12)O(12)(O(2)CMe)(16)(H(2)O)(4)] with concomitant fragmentation of the dodecanuclear Mn core of the starting material to form a trinuclear Mn(3)(μ(3)-O) cluster capped by six carboxylate ligands. Bond valence sum calculations and SQUID magnetometric measurements establish the oxidation states of the metal ions as Mn(II)·2 Mn(III) which are antiferromagnetically coupled.