Numerical Modeling of Solitons in a Low Birefringent Optical Fiber

A numerical investigation, based on the split-step Fourier transform algorithm of all optical switching of solitons in a low birefringent optical fiber is presented. The numerical algorithm is described in detail. This revised version was published online in August 2006 with corrections to the Cover Date.     

Titanium(IV) tungstosilicate and titanium(IV) tungstophosphate: two new inorganic ion exchangers

Crystalline phases of Ti(IV) tungstosilicate and Ti(IV) tungstophosphate have been synthesised. The ion-exchange capacities of Ti(IV) tungstosilicate and Ti(IV) tungstophosphate have been reported as 0.44 and 0.80 mequiv./g, respectively. Both materials show monofunctional ion-exchange characteristic and are stable in 0.1 M solutions of HNO3, HCl, H2SO4 and acetone and benzene. Ti(IV) tungstosilicate is found to be more stable thermally than Ti(IV) tungstophosphate (loss in ion-exchange capacity was found as 58 and 80%, respectively for samples heated at 200 degrees C). The Kd values for heavy metals such as Pb, Hg, Cd, Sb, Co, Zn, Ni, Fe, Cr etc. have been reported in demineralised water and two surfactant media by batch processes. Cr3+, Fe3+ and Sn4+ are totally adsorbed on both the materials in demineralised water while a decrease in Kd value with increase in concentration of two surfactants is reported. On the basis of Kd values for metal ions, thirteen binary separations and five ternary separations on Ti(IV) tungstosilicate and thirteen different binary separations and four different ternary separations on Ti(IV) tungstophosphate have been achieved. Separation of methylamine from ethylamine has been done by GC on a column packed with Ti(IV) tungstophosphate.     

Structure determination of bioactive galloyl derivatives by NMR spectroscopy

The investigation of the chemical constituents of Symplocos racemosa Roxb led to the isolation of two new glycosides, symcomoside A (1) and symcomoside B (2), together with one known glycoside, tortoside C (3), which is reported for the first time from this plant. The structures of the new compounds were determined by 1D and 2D homonuclear and heteronuclear NMR spectroscopy, from chemical evidence and by comparison with published data for closely related compounds. Symcomoside B (2) showed potent inhibitory activity against alpha-glucosidase in a concentration-dependent fashion with an IC50 value of 0.733 +/- 0.033 mM whereas symcomoside A (1) showed very weak inhibitory activity against alpha-glucosidase (9.90% in 0.70 mM).     

Experimental study of effect of void volume fraction on neutron diffusion parameters in water

The dependence of the diffusion parameters including slowing down area, neutron diffusion length and migration length on the voided volume fraction in water has been studied experimentally. For this purpose, the PIEAS Neutron Transport Facility (PNTF) comprised of a 10 Ci Am–Be neutron source and a water filled aluminum tank with Perspex voided tubes has been designed and fabricated. A BF₃ detector was used for the neutron counting. The slowing down area was determined at the cadmium cutoff level. The diffusion parameters were determined first in the absence of voids. The experimentally measured values of the slowing down area, the diffusion length and the migration length have been found in good agreement with the corresponding values determined by other workers. By varying void volume fraction from 0% to 7.5%, the experimental measurements show a monotonic increase in the slowing down area from 58.71±2.6 to 71.28±3.2 cm², in the diffusion length from 2.95±0.13 to 3.11±0.13 cm and in the migration length from 8.21±0.165 to 8.99±0.169 cm. Our measurements show that the diffusion parameters exhibit a quadratic dependence on the void volume fraction.     

High temperature reactions of titanium(IV) oxide with some alkali persulfates and their decomposition products

The solid state reactions between TiO₂ and Na₂S₂O₈ or K₂S₂O₈ have been investigated using TG, DTG, DTA, IR, and X-ray diffraction studies in the range of 20 to 1000°C.It has been shown that TiO₂ reacts stoichiometrically (1 : 1) with Na₂S₂O₈ in the range of 160 and 220°C forming the complex sodium monoperoxodisulfato—titanium(IV) as characterized by IR and X-ray analysis. The new complex then decomposes into the reactants above 190°C.An exothermic reaction has been observed between TiO₂ and molten K₂S₂O₇ at mole ratio 1:2 respectively and higher, in the range of 280 and 350°C. The IR and X-ray analyses have shown the formation of a complex namely, potassium tetrasulfato titanium(IV) for which the formula and structure have been proposed. This complex decomposes at higher temperatures into K₂SO₄ and a mixed sulfate of potassium and titanium. The mixed sulfate melts at 620°C and decomposes into K₂SO₄, TiO₂, and the gaseous SO₃.On the other hand, Na₂S₂O₈ decomposes in a special mode producing a polymeric product of Na₁₀S₉O₃₂. Decomposition of this species occurs after melting at 560°C into Na₂SO₄ and sulfur oxides. The decomposition reaction has been proved to be catalysed by TiO₂ itself.     

Copper-catalyzed N-arylation of diazoles with aryl bromides using KF/Al2O3: an improved protocol

Copper-catalyzed N-arylation of diazoles can be accomplished using air-stable CuI as a copper source and 1,10-phenanthroline in the presence of KF/Al₂O₃ as a base. This is a simple and efficient method for the coupling of aryl bromide with diazoles. Different functionalized aryl bromides were coupled with diazoles using this system.