Differential pulse anodic stripping voltammetric determination of traces of copper with a tobramycin-Nafion modified electrode.

A Nafion-modified glassy carbon electrode incorporated with tobramycin for the voltammetric stripping determination of Cu2+ has been explored. The electrode was fabricated by tobramycin containing Nafion on the glassy carbon electrode surface. The modified electrode exhibited a significantly increased sensitivity and selectivity for Cu2+ compared with a bare glassy carbon electrode and the Nafion modified electrode. Cu2+ was accumulated in HAc-NaAc buffer (pH 4.6) at a potential of -0.6 V (vs. SCE) for 300 s and then determined by differential pulse anodic stripping voltammetry. The effects of various parameters, such as the mass of Nafion, the concentration of tobramycin, the pH of the medium, the accumulation potential, the accumulation time and the scan rate, were investigated. Under the optimum conditions, a linear calibration graph was obtained in the concentration range of 1.0 x 10(-9) to 5.0 x 10(-7) mol l(-1) with a correlation coefficient of 0.9971. The relative standard deviations for eight successive determinations were 4.3 and 2.9% for 1.0 x 10(-8) and 2.0 x 10(-7) mol l(-1) Cu2+, respectively. The detection limit (three times signal to noise) was 5.0 x 10(-10) mol l(-1). A study of interfering substances was also performed, and the method was applied to the direct determination of copper in water samples, and also in analytical reagent-grade salts with satisfactory results.     

核内核子－核子非弹散射截面（Ⅰ）

在与平均场、核内核子－核子弹性散射截面以及输运方程相统一的理论框架内推导了核内核子－核子非弹散射截面的解析表达式．其数值结果能很好地重现自由非弹截面的实验值，所计算的有效非弹截面与Ｄｉｒａｃ－Ｂｒｕｅｃｋｎｅｒ的计算结果相一致．     

Determination of lead by selective chelatometric titration with HEDTA after separation as its sulphate by an improved method of precipitation

A selective titrimetric determination of Pb after separation by a modified method of precipitation as its sulphate is proposed. Pb(II), present as the perchlorate, is precipitated by gentle boiling in 3.6M H(2)SO(4) presaturated with PbSO(4) and free from any extraneous anions. The customary time-consuming evaporation to fumes of sulphuric acid is dispensed with. The precipitate is collected, and dissolved in excess of HEDTA, the surplus of which is back-titrated with Zn(II) at pH 5.0-5.5. Use of Catechol Violet and Xylenol Orange as a mixed indicator gives a sharper end-point. The standard deviation of the proposed method for 60 mg of lead is 0.35 mg. The method has been successfully used to determine Pb in non-ferrous alloys.     

Novel Rearrangements of 2,3-Dimercapto-1-propanol Derivatives: Formation of Dialkyl Sulfide, Dialkyl Disulfide, and 1,2,3-Tris(alkylthio)propane

The base alkylation of 2,3-dimercapto-1-propanol with alkyl halides leads in good yield to 2,3-bis(alkylthio)-1-propanol and dialkyl sulfide. The reaction of 2,3-bis(alkylthio)-1-propanol with catalytic concentrated sulfuric acid proceeds with rearrangement to give 1,2,3-tris(alkylthio)propane and dialkyl disulfide. The rearrangement reaction takes place through a common intermediate thiaranium intermediate 8.     

First total synthesis of leucamide A

The first total synthesis of marine bioactive cyclic heptapeptide Leucamide A has been accomplished, including a simple method for construction of the 4,2-bisheterocycle tandem pair substructure that employs a DAST-mediated cyclization of beta-hydroxy amide and final HBTU-promoted ring closing.     

Synthesis and stereochemical assignment of 7-arylidene and 7-heteroarylidene morphinan-6-ones

A number of (E)-7-arylidenenaltrexones were synthesized by azeotropic distillation of water from a benzene solution of naltrexone and an aromatic aldehyde (benzaldehyde, 4-chloro- and 4-fluorobenzaldehyde, 3-and 4-pyridinecarboxaldehyde and 1-methyl-2-imidazolecarboxaldehyde) using piperidine as a catalyst. In addition, (E)-7-benzylidenenaloxone was prepared by the previously published Claisen-Schmidt condensation using sodium hydroxide in methanol. The stereochemistry of these arylidene derivatives 3–9 was determined to be (E) by means of nuclear Overhauser enhancement experiments. The ¹³C nmr spectra of (E)- 3–9 are recorded in deuteriochloroform and those of the hydrochlorides in deuteriodimethyl sulfoxide.     

Quantitative volatilization of tin as mixed halides and its application in metal analysis

Proposed in this paper is an improved method for removal of tin as the matrix element by volatilization in an anhydrous medium as mixed halides of different composition. Any one of them boils at a lower temperature than SnBr₄. This ternary system enhances the eventual recombination of temporarily dissociated species to volatile ones, thus making the process quicker and more efficient. The presence of 2 mg of Pb(II) suffices to prevent Bi(III) from loss due to volatilization.     

Copper(II)-catalyzed aerobic oxidation of primary alcohols to aldehydes in ionic liquid [bmpy]PF6

A room-temperature aerobic oxidation of primary alcohols to aldehydes catalyzed by the three-component system acetamido-TEMPO/Cu(ClO(4))(2)/DMAP in the ionic liquid [bmpy]PF(6) has been developed, and the catalysts can be recycled and reused for five runs without any significant loss of catalytic activity. [reaction: see text]     

Facile Synthesis of Tricyclic 1,2,4-Oxadiazolines-Fused Tetrahydro-Isoquinolines from Oxime Chlorides with 3,4-Dihydroisoquinoline Imines

A mild and efficient strategy for the synthesis of tricyclic 1,2,4-oxadiazolines-fused tetrahydro-isoquinolines derivatives via [3 + 2] cycloaddition reaction is reported. The reactions provided the functionalized tricyclic 1,2,4-oxadiazolines in high yields (up to 96%). This protocol is simple and easy to handle. Moreover, a gram-scale experiment further highlights the synthetic utility. The chemical structure of the product was determined by X-ray single-crystal structure analysis. A possible mechanism for this transformation is proposed to explain the reaction process.     

A MALDI-MS sensing chip prepared by non-covalent assembly for quantitation of acid phosphatase

A novel sensing chip was designed for MALDI-MS quantitation of acid phosphatase(ACP).The ACP sensing chip was constructed through non-covalent interaction of streptavidin and biotin for the assembly of biotinylated peptide substrate on biotinylated polyethylene-glycol(PEG)modified indium-tin oxide(ITO)slide.In the presence of ACP,the peptide substrate was dephosphorylated under acidic condition to generate a new mass signal.The quantitative assay of ACP was achieved with the mass signal ratio of product to the sum of product and left peptide substrate.Under optimal detection conditions,the ratio was linearly correlated with the concentration of ACP in the range of 0.05–12 g/L with a detection limit(LOD)of 0.04 g/L.The designed ACP sensing chip has been used to analyze ACP in complex clinical samples,which exhibited high selectivity,good repeatability,and admirably anti-interference ability.This work further demonstrates the concept of MS sensing and the application of MALDI-MS in quantitative analysis,and provides a convenient method for the quantitation of proteases in clinical diagnosis.