Time-resolved chemiluminescence technique for the microdetermination of proteins based on their complexation with copper(II).

Based on the complexation between proteins and Cu(II) coupled with the time-resolved chemiluminescence (CL) technique, a highly sensitive and quantitative assay for measuring proteins in solution is described. The complexes of proteins with Cu(II) have a strongly catalytic effect on the luminol-H2O2 CL reaction. Because the CL emission produced by the complexes is much more long-lived than that by Cu(II), the CL signals originating from proteins can be easily identified and measured with a time-resolved technique. On this basis, bovine albumin fraction V (BAF V) can be quantitatively determined in the range of 0.01 - 5.0 microg/ml with a detection limit of 5.8 ng/ml. The results show that the proposed assay exhibits a small variation in the response values for the same amount of different proteins, as compared to the Lowry as well as Bradford assays. The CL assay has also been studied for the detection of immobilized proteins.     

Luttinger liquid with asymmetric dispersion

We present an extension of the Tomonaga-Luttinger model in which left and right-moving particles have different Fermi velocities. We derive expressions for one-particle Green's functions, momentum-distributions, density of states, charge compressibility and conductivity as functions of both the velocity difference ε and the strength of the interaction β. This allows us to identify a novel restricted region in the parameter space in which the system keeps the main features of a Luttinger liquid but with an unusual behavior of the density of states and the static charge compressibility κ. In particular κ diverges on the boundary of the restricted region, indicating the occurrence of a phase transition. Received 20 May 2002 / Received in final form 23 August 2002 Published online 19 November 2002     

Some results on fractionaln-factor-critical graphs

A simple graphG is said to be fractionaln-factor-critical if after deleting anyn vertices the remaining subgraph still has a fractional perfect matching. For fractionaln-factor-criticality, in this paper, one necessary and sufficient condition, and three sufficient conditions related to maximum matching, complete closure are given.     

用多焦点全息透镜实现多重谱分数傅里叶变换

提出用多焦点全息透镜实现多重谱分数傅里叶变换.利用全息方法通过一次曝光制作出多焦点的全息透镜,分析了用此全息元件实现这种变换的条件,并在实验上实现了多重谱分数傅里叶变换. 实验结果表明这种变换方法简便可行,可广泛应用于多通道光学信息处理系统及多目标图像识别系统中.     

On a Boolean-valued Model of the Strict Implication System(Continuous)

The reference [4] proved the consistency of S1 and S2 among Lewis' five strict implication systems in the modal logic by using the method of the Boolean-valued model. But, in this method, the consistency of S3, S4 and S5 in Lewis' five strict implication systems is not decided. This paper makes use of the properties: (1) the equivalence of the modal systems S3 and P3, S4 and P4; (2) the modal systems P3 and P4 all contained the modal axiom T(□p → p); (3) the modal axiom T is correspondence to the reflexive property in VB. Hence, the paper proves: (a) ‖As31‖ = 1; (b) ‖AS41‖ = 1; (c) ‖AS5l‖ = 1 in the model (where B is a complete Boolean algebra, R is reflexive property in VB). Therefore, the paper finally proves that the Boolean-valued model VB of the ZFC axiom system in set theory is also a Boolean-valued model of Lewis' the strict implication system S3, S4 and S5.     

有机化合物电子光谱中的助色基及其作用机理探讨(Ⅰ)

本文就电子光谱中助色基的作用进行了讨论 ,认为不能一概地认为助色基能使与之相连的生色基最大吸收波长统统发生红移 ,而应具体问题具体分析 :对于n→π 来说 ,一方面助色基的p轨道和生色基的最低π 反键空轨道相互作用 ,使π 反键轨道能量上升 ,另一方面助色基的p轨道和生色基的n轨道正交 ,n轨道能量基本保持不变 ,因此n→π 跃迁能增加 ,吸收波长发生蓝移。对于π→π 跃迁来说 ,助色基的p轨道和生色基的最高π成键轨道相互作用生成的新的最高π成键轨道 ,能量虽然有所升高 ,但升高的程度与π 反键轨道升高的程度相比 ,在一些化合物中π轨道升高程度较大 ,因而π→π 跃迁能减小 ,吸收波长发生红移 ;在另一些化合物中π轨道升高程度较小 ,因而π→π 跃迁能增加 ,吸收波长发生蓝移。     

Simulation of polarization effects in AlGaN/GaN heterojunction

Because of their large band-gap, large high-field electron velocity, large breakdownfield, and large thermal conductivity, GaN and its heterojunction with AlGaN and InGaNhave foreseeable potential in the applications of high-power/temperature electronics, andoptoelectronic devices operative in UV and visible wavelength. Polarization inducedelectric field can reach the magnitude of ~MV/cm[1,2]. For AlGaN/GaN based FETs theconcentration of sheet carrier induced by polarization in the cha…     

Synthesis and micellization of amphiphilic poly(sebacic anhydride)–poly(ethylene glycol)–poly(sebacic anhydride) block copolymers

Amphiphilic biodegradable block copolymers [poly(sebacic anhydride)–poly(ethylene glycol)–poly(sebacic anhydride)] were synthesized by the melt polycondensation of poly(ethylene glycol) and sebacic anhydride prepolymers. The chemical structure, crystalline nature, and phase behavior of the resulting copolymers were characterized with ¹H NMR, Fourier transform infrared, gel permeation chromatography, and differential scanning calorimetry. Microphase separation of the copolymers occurred, and the crystallinity of the poly(sebacic anhydride) (PSA) blocks diminished when the sebacic anhydride unit content in the copolymer was only 21.6%. ¹H NMR spectra carried out in CDCl₃ and D₂O were used to demonstrate the existence of hydrophobic PSA domains as the core of the micelle. In aqueous media, the copolymers formed micelles after precipitation from water‐miscible solvents. The effects on the micelle sizes due to the micelle preparation conditions, such as the organic phase, dropping rate of the polymer organic solution into the aqueous phase, and copolymer concentrations in the organic phase, were studied. There was an increase in the micelle size as the molecular weight of the PSA block was increased. The diameters of the copolymer micelles were also found to increase as the concentration of the copolymer dissolved in the organic phase was increased, and the dependence of the micelle diameters on the concentration of the copolymer varied with the copolymer composition. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1271–1278, 2006     

Investigation of sulfonated poly(ether ether ketone sulfone)/heteropolyacid composite membranes for high temperature fuel cell applications

The sulfonated poly(ether ether ketone sulfone) (SPEEKS)/heteropolyacid (HPA) composite membranes with different HPA content in SPEEKS copolymers matrix with different degree of sulfonation (DS) were investigated for high temperature proton exchange membrane fuel cells. Composite membranes were characterized by Fourier transfer infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). FTIR band shifts suggested that the sulfonic acid groups on the copolymer backbone strongly interact with HPA particles. SEM pictures showed that the HPA particles were uniformly distributed throughout the SPEEKS membranes matrix and particle sizes decreased with the increment of copolymers' DS. The holes were not found in SPEEKS‐4/HPA30 (consisting of 70% SPEEKS copolymers with DS = 0.8 and 30% HPA) composite membrane after composite membranes were treated with boiling water for 24 h. Thermal stabilities of the composite membranes were better than those of pure sulfonated copolymers membranes. Although the composite membranes possessed lower water uptake, it exhibited higher proton conductivity for SPEEKS‐4/HPA30 especially at high temperature (above 100 °C). Its proton conductivity linearly increased from 0.068 S/cm at 25 °C to 0.095 S/cm at 120 °C, which was higher than 0.06 S/cm of Nafion 117. In contrast, proton conductivity of pure SPEEKS‐4 membrane only increased from 0.062 S/cm at 25 °C to 0.078 S/cm at 80 °C. At 120 °C, proton conductivity decreased to poor 0.073 S/cm. The result indicated that composite membranes exhibited high proton conductivity at high temperature. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1967–1978, 2006     

Forward-backward multiplicity correlations in σ+ p,K + p andpp collisions at 250 GeV/c

Forward-backward multiplicity correlations in σ⁺,K ⁺ p andpp collisions at 250 GeV/c ( \(\sqrt s \) =22 GeV) are given for all charges and for the different charge combinations. The correlations are found to be caused predominantly by centrally produced particles. It is demonstrated that this result is an agreement with observations at the ISR and the CERNp \(\bar p\) -Collider. The results are compared to expectations from LUND, DPM and FRITIOF Monte Carlo models and a geometrical picture relating correlations in hadron-hadron collisions toe ⁺ e ^? data in terms of impact parameters is tested.